5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) 1. Explanation of Product Number H 2 U 2 6 2 (1) G (2) K B A (3) (4) (5) 0 1 0 0 (6) Product Code: (1) Product categories: 6: polymer substrate (2) Dimensions and polarization: 2G: 5x2.2x1.6(mm) / linear polarization (3) Material: K: FR4 (4) Working frequency: B: 2400~2500MHz (5) Ground plane dimensions: A: special (6) Antenna series: 01: serial number Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 1 C OF 10 2. Features *Stable and reliable in performances *Low temperature coefficient of frequency *Miniature size *RoHS compliance *SMD type 3. Applications *Bluetooth earphone systems *Hand-held devices when Bluetooth/WiFi functions are needed, e.g., Smart phone. *Wireless PCMCIA cards or USB dongle. *IEEE802.11 b/g *ZigBee 4. Description Unictron’s chip antenna series are specially designed for Bluetooth/WiFi applications. Based on Unictron’s proprietary design and processes, this chip antenna has excellent stability and sensitivity to consistently provide high signal reception efficiency. 5. Electrical Specifications (On 100x55 mm Ground Plane) Characteristics Specifications Unit 5x2.2x1.6 100x55 2450 100 min. 2 max. 50 Linear 3.1(typical) -2.5(typical) Omni -40 ~ +85 mm mm MHz MHz Outline Dimensions Ground Plane Center Frequency* Bandwidth (under -10dB return loss) VSWR Impedance Polarization Peak Gain Average Pattern Operating Temperature Ω dBi ℃ *Center frequency will be offset to working frequency according to the conditions of user’s ground plane and radome. Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 2 C OF 10 6. Antenna Dimensions & Test Board a. Antenna Dimensions Unit:mm Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 3 C OF 10 b. Test Board with Antenna (a). Type A (b). Type B Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 4 C OF 10 7. Electrical Characteristics (On 100x55 mm ground plane) a. Type A Return Loss(S11) Smith Chart b. Type B Return Loss(S11) Smith Chart Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 5 C OF 10 8. Radiation Pattern (On 100x55 mm ground plane) Rotating 0ﾟ AUT Standard horn antenna AUT: Antenna under testing 90 ﾟ a. Type A XZ Y Far-field amplitude of P1 H_2.4G.nsi Xpol X Ppol 345 0 15 330 30 315 45 300 60 285 75 270 -30 -20 -10 0 dB 255 90 Z 105 240 120 225 135 210 150 195 180 165 (Peak Gain =5.29 dBi, Average Gain -1.1dBi ) Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 6 C OF 10 YZ XY Far-field amplitude of P1 E_2.4G02.nsi Xpol Far-field amplitude of P1 E1_2.4G.nsi Ppol 0 345 Xpol 15 30 315 45 285 -20 -10 60 75 270 105 240 -30 120 -10 0 dB 240 120 225 150 135 210 150 195 (Peak Gain =2.29 dBi, Average Gain -3.97dBi ) 90 105 165 180 -20 255 135 195 45 285 90 0 dB 255 225 30 300 75 210 15 315 60 -30 0 330 300 270 Ppol 345 330 180 165 (Peak Gain =3.35 dBi, Average Gain -4.11dBi ) Source signal: Linearly polarized signal f0= 2450 MHz Gain Table: Total power=Xpol +Ppol Plane XZ YZ XY Peak Gain(dBi) 5.29 2.29 3.35 Average Gain(dBi) -1.1 -3.97 -4.11 b. Type B XZ Y Far-field amplitude of P2 H_2.4G.nsi Xpol X Ppol 345 0 15 330 30 315 45 300 60 285 Z 75 270 -30 -20 -10 0 dB 255 90 105 240 120 225 135 210 150 195 180 165 (Peak Gain =2.28 dBi, Average Gain -2.16dBi ) Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 7 C OF 10 YZ XY Far-field amplitude of P2 E1_2.4G.nsi Far-field amplitude of P2 E_2.4G.nsi Xpol Xpol Ppol 345 0 330 300 285 0 dB 255 75 -30 180 0 dB 240 135 210 150 195 165 (Peak Gain =3.98 dBi, Average Gain -0.02dBi ) 90 120 225 150 195 -10 105 135 210 -20 255 120 225 60 270 90 105 240 45 285 75 -10 30 300 60 -20 15 315 45 -30 0 330 30 315 270 Ppol 345 15 180 165 (Peak Gain =1.42 dBi, Average Gain -3.8dBi ) Source signal: Linearly polarized signal f0= 2450 MHz Gain Table: Total power=Xpol +Ppol Plane XZ YZ XY Peak Gain(dBi) 2.28 3.98 1.42 Average Gain(dBi) -2.16 -0.02 -3.8 Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 8 C OF 10 9. Layout Guide: a. Solder Land Pattern: Land pattern for soldering (black marking areas) is as shown below. Depending on Customer’s requirement, matching circuit as shown below is also recommended . Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 9 C OF 10 10. Packing: (1) Quantity/Reel: 3000pcs/Reel (2) Plastic tape: 2.1 Tape Dimensions(unit: mm) Feature Specifications Tolerances W 12.00 ±0.30 P 8.00 ±0.10 E 1.75 ±0.10 F 5.50 ±0.10 P2 2.00 ±0.10 D 1.50 +0.10 -0.00 Po 4.00 ±0.10 10Po 40.00 ±0.20 1. Cumulative tolerance of 10 sprocket hole pitch: ±0.20mm 2. Carrier camber not to exceed 1mm in 250mm 3. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket. 4. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 5. All dimensions meet EIA-481-B requirements. 2.2 Pocket Dimensions(unit: mm) Feature Specifications Tolerances Ao 2.70 ±0.10 g Bo 5.30 ±0.10 Ko 1.70 ±0.10 t 0.30 ±0.05 6. Material: ■ Clear Non Anti-Static Polystyrene. □ Black Conductive Polystyrene. 11. Storage Conditions: (1) Temperature: 5℃ to 40℃ (2) Relative Humidity: 20% to 70% Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Gilespi Checked By : Jason Designed By :Wilson Approved By :Jaixing TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U262GKBA0100 PAGE 10 C OF 10