UTC-IC 3N60L-X-TF1-T

UNISONIC TECHNOLOGIES CO., LTD
3N60
Power MOSFET
3 Amps, 600/650 Volts
N-CHANNEL POWER MOSFET
„
DESCRIPTION
The UTC 3N60 is a high voltage and high current power
MOSFET , designed to have better characteristics, such as fast
switching time, low gate charge, low on-state resistance and have
a high rugged avalanche characteristics. This power MOSFET is
usually used at high speed switching applications in power
supplies, PWM motor controls, high efficient DC to DC converters
and bridge circuits.
„
FEATURES
* RDS(ON) = 3.6Ω @VGS = 10 V
* Ultra low gate charge ( typical 10 nC )
* Low reverse transfer capacitance ( CRSS = typical 5.5 pF )
* Fast switching capability
* Avalanche energy specified
* Improved dv/dt capability, high ruggedness
„
Lead-free:
3N60L
Halogen-free: 3N60G
SYMBOL
2.Drain
1.Gate
3.Source
„
ORDERING INFORMATION
Normal
3N60-x-TA3-T
3N60-x-TF1-T
3N60-x-TF3-T
3N60-x-TM3-R
3N60-x-TN3-R
Ordering Number
Lead Free
3N60L-x-TA3-T
3N60L-x-TF1-T
3N60L-x-TF3-T
3N60L-x-TM3-R
3N60L-x-TN3-R
Halogen Free
3N60G-x-TA3-T
3N60G-x-TF1-T
3N60G-x-TF3-T
3N60G-x-TM3-R
3N60G-x-TN3-R
3N60L-x-TA3-T
(1)Packing Type
(2)Package Type
(3)Drain-Source Voltage
(4)Lead Plating
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
Package
TO-220
TO-220F1
TO-220F
TO-251
TO-252
Pin Assignment
1
2
3
G
D
S
G
D
S
G
D
S
G
D
S
G
D
S
Packing
Tube
Tube
Tube
Tube
Tape Reel
(1) R: Tape Reel, T: Tube
(2) TA3: TO-220, TF1: TO-220F1, TF3: TO-22F,
TM3: TO-251, TN3: TO-252
(3) A: 600V, B: 650V
(4) G: Halogen Free, L: Lead Free, Blank: Pb/Sn
1 of 8
QW-R502-110,F
3N60
„
Power MOSFET
ABSOLUTE MAXIMUM RATINGS (TC = 25℃, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
600
V
Drain-Source Voltage
VDSS
650
V
Gate-Source Voltage
VGSS
±30
V
Avalanche Current (Note 1)
IAR
3.0
A
Continuous Drain Current
ID
3.0
A
Pulsed Drain Current (Note 1)
IDM
12
A
Single Pulsed (Note 2)
EAS
200
mJ
Avalanche Energy
Repetitive (Note 1)
EAR
7.5
mJ
Peak Diode Recovery dv/dt (Note 3)
dv/dt
4.5
V/ns
TO-220
75
Power Dissipation
PD
W
TO-220F/TO-220F1
34
TO-251/TO-252
50
Junction Temperature
TJ
+150
℃
Operating Temperature
TOPR
-55 ~ +150
℃
Storage Temperature
TSTG
-55 ~ +150
℃
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
3N60-A
3N60-B
„
THERMAL DATA
PARAMETER
TO-220
Junction-to-Ambient
TO-220F/TO-220F1
TO-251/TO-252
TO-220
Junction-to-Case
TO-220F/TO-220F1
TO-251/TO-252
„
SYMBOL
θJA
θJC
RATING
62.5
62.5
110
1.67
3.68
2.5
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TC =25℃, unless otherwise specified)
PARAMETER
OFF CHARACTERISTICS
Drain-Source Breakdown Voltage
SYMBOL
3N60-A
3N60-B
Drain-Source Leakage Current
Gate-Source Leakage Current
Forward
Reverse
Breakdown Voltage Temperature
Coefficient
ON CHARACTERISTICS
Gate Threshold Voltage
Static Drain-Source On-State Resistance
DYNAMIC CHARACTERISTICS
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
BVDSS
VGS = 0 V, ID = 250 μA
IDSS
VDS = 600 V, VGS = 0 V
VGS = 30 V, VDS = 0 V
VGS = -30 V, VDS = 0 V
IGSS
MIN TYP MAX UNIT
600
650
10
100
-100
△BVDSS/△TJ ID = 250 μA, Referenced to 25°C
VGS(TH)
RDS(ON)
CISS
COSS
CRSS
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
VDS = VGS, ID = 250 μA
VGS = 10 V, ID = 1.5A
VDS = 25 V, VGS = 0 V, f = 1MHz
0.6
2.0
V
V
μA
nA
nA
V/℃
2.8
4.0
3.6
V
Ω
350
50
5.5
450
65
7.5
pF
pF
pF
2 of 8
QW-R502-110,F
3N60
„
Power MOSFET
ELECTRICAL CHARACTERISTICS(Cont.)
SWITCHING CHARACTERISTICS
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
Turn-On Delay Time
tD(ON)
10
30
ns
Turn-On Rise Time
tR
30
70
ns
VDD = 300V, ID = 3.0 A, RG = 25Ω
(Note 4, 5)
Turn-Off Delay Time
tD(OFF)
20
50
ns
30
70
ns
Turn-Off Fall Time
tF
Total Gate Charge
QG
10
13
nC
VDS= 480V,ID= 3.0A, VGS= 10 V
Gate-Source Charge
QGS
2.7
nC
(Note 4, 5)
4.9
nC
Gate-Drain Charge
QDD
SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS
Drain-Source Diode Forward Voltage
VSD
VGS = 0 V, IS = 3.0 A
1.4
V
Maximum Continuous Drain-Source Diode
IS
3.0
A
Forward Current
Maximum Pulsed Drain-Source Diode
ISM
12
A
Forward Current
Reverse Recovery Time
tRR
210
ns
VGS = 0 V, IS = 3.0 A,
dI
/dt
=
100
A/μs
(Note
4)
Reverse Recovery Charge
QRR
1.2
μC
F
Notes: 1. Repetitive Rating: Pulse width limited by maximum junction temperature
2. L = 64mH, IAS = 2.4A, VDD = 50V, RG = 25 Ω, Starting TJ = 25°C
3. ISD ≤ 3.0A, di/dt ≤200A/μs, VDD ≤ BVDSS, Starting TJ = 25°C
4. Pulse Test: Pulse width ≤ 300μs, Duty cycle ≤ 2%
5. Essentially independent of operating temperature
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 8
QW-R502-110,F
3N60
„
Power MOSFET
TEST CIRCUITS AND WAVEFORMS
+
D.U.T.
VDS
+
-
L
RG
Driver
Same Type
as D.U.T.
VGS
VDD
* dv/dt controlled by RG
* ISD controlled by pulse period
* D.U.T.-Device Under Test
Fig. 1A Peak Diode Recovery dv/dt Test Circuit
VGS
(Driver)
Period
D=
P.W.
P. W.
Period
VGS= 10V
IFM, Body Diode Forward Current
ISD
(D.U.T.)
di/dt
IRM
Body Diode Reverse Current
Body Diode Recovery dv/dt
VDS
(D.U.T.)
VDD
Body Diode
Forward Voltage Drop
Fig. 1B Peak Diode Recovery dv/dt Waveforms
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 8
QW-R502-110,F
3N60
„
Power MOSFET
TEST CIRCUITS AND WAVEFORMS (Cont.)
Fig. 2A Switching Test Circuit
Fig. 2B Switching Waveforms
Fig. 3A Gate Charge Test Circuit
Fig. 3B Gate Charge Waveform
L
VDS
BVDSS
IAS
RD
10V
VDD
D.U.T.
ID(t)
VDS(t)
VDD
tp
tp
Fig. 4A Unclamped Inductive Switching Test Circuit
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
Time
Fig. 4B Unclamped Inductive Switching Waveforms
5 of 8
QW-R502-110,F
3N60
TYPICAL CHARACTERISTICS
On-Resistance Variation vs.
Drain Current and Gate Voltage
On State Current vs.
Allowable Case Temperature
6
10
Reverse Drain Current, IDR (A)
Drain-Source On-Resistance,
RDS(ON) (Ω)
„
Power MOSFET
5
VGS=20V
4
VGS=10V
3
2
1
1
Note: TJ=25℃
0
0
2
4
6
8
10
12
Drain Current, ID (A)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
0.1
0.2 0.4 0.6 0.8 1.0 1.2
Notes:
1. VGS=0V
2. 250µs Test
1.4 1.6
1.8
Source-Drain Voltage, VSD (V)
6 of 8
QW-R502-110,F
3N60
„
Power MOSFET
TYPICAL CHARACTERISTICS(Cont.)
Maximum Drain Current vs. Case
Temperature
Transient Thermal Response Curve
3.0
1
2.5
D=0.5
2.0
0.2
0.1
0.1
1.5
0.05
0.02
1.0
0.01
Single Pulse
0.01
Notes:
1. θJC (t) = 1.18 /W Max.
2. Duty Factor, D=t1/t2
3. TJM-TC=PDM×θJC (t)
10-5
10-4 10-3
10-2
10-1
100
101
Square Wave Pulse Duration, t1 (sec)
0.5
0
25
50
75
100
125
Case Temperature, TC ( )
Safe Operating Area – 600V
for 3N60-A
Safe Operating Area – 650V
for 3N60-B
Operation in This Area is Limited by RDS(on)
Operation in This Area is Limited by RDS(on)
101
101
100µs
100µs
1ms
1ms
10ms
100
10ms
100
DC
DC
Notes:
1. TJ=25
2. TJ=150
3. Single Pulse
10-1
10-2
100
101
10-1
102
600
103
Drain-Source Voltage, VDS (V)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
150
10-2
100
Notes:
1. TJ=25
2. TJ=150
3. Single Pulse
101
650
102
103
Drain-Source Voltage, VDS (V)
7 of 8
QW-R502-110,F
3N60
Power MOSFET
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
8 of 8
QW-R502-110,F