UNISONIC TECHNOLOGIES CO., LTD L8561 LINEAR INTEGRATED CIRCUIT POWER FACTOR CORRECTOR DESCRIPTION The UTC L8561 is a Power Factor Corrector, which can work in wide input voltage range applications (from 85V ~ 265V) with an excellent THD. It has very low start up current (about 20 uA) and a disable function on the ZCD pin, which is designed to keep lower current consumption in stand by mode. The device is operating in transition mode, and is able to drive a Power MOS or IGBT with a ± 400mA current for sourcing and sinking. FEATURES * 1% Precision (@ TJ = 25℃) Internal Reference Voltage * Output Overvoltage Protection * Very Low Power Start-Up Current * Current Sense Filter On Chip * Disable Function (with ZCD pin) * Transition Mode Operation * Gate Driving Current: ± 400mA * 15V Gate clamped ORDERING INFORMATION Ordering Number Lead Free Halogen Free L8561L-D08-T L8561G-D08-T L8561L-S08-R L8561G-S08-R L8561L-S08-T L8561G-S08-T www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., LTD Package Packing DIP-8 SOP-8 SOP-8 Tube Tape Reel Tube 1 of 6 QW-R502-444.D L8561 LINEAR INTEGRATED CIRCUIT PIN CONFIGURATION PIN DESCRIPTION PIN NO 1 2 3 4 5 6 7 8 PIN NAME INV COMP MULT CS ZCD GND GD VCC DESCRIPTION Inverting input of the error amplifier. Output of the error amplifier. Input of the multiplier stage. Input of the current sense stage. Input of the zero current detection . Ground. Gate driver output. Voltage supply. BLOCK DIAGRAM + UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R502-444.D L8561 LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATING (TA=25℃, unless otherwise specified) PARAMETER Analog Inputs & Outputs Current Sense Input Iq+Iz (IGD = 0) Output Totem Pole Peak Current (2ms) RATINGS UNIT -0.3 ~ 7 V -0.3 ~ 7 V 30 mA ±700 mA 50 (source) Zero Current Detector ZCD mA -10 (sink) SOP-8 1 W Power Dissipation @ TA=50℃ PD DIP-8 0.65 W Junction Temperature TJ 125 ℃ Operating Temperature TOPR -20 ~ +85 ℃ Storage Temperature TSTG -40 ~ +150 ℃ Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Note: Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL INV, COMP MULT CS IVCC IGD ELECTRICAL CHARACTERISTICS (TA=-25℃ ~ 125℃,VCC=14.5V, unless otherwise specified) PARAMETER SUPPLY VOLTAGE SECTION Operating Range Turn-on Threshold Turn-off Threshold Hysteresis SUPPLY CURRENT SECTION Start-up Current Quiescent Current PIN SYMBOL 8 8 8 8 VCC VCC ON VCC OFF Hys after turn-on 8 8 ISTART-U Iq VCCON-1V 8 ICC Operating Supply Current Quiescent Current Zener Voltage ERROR AMPLIFIER SECTION Voltage Feedback Input Threshold Line Regulation Input Bias Current Voltage Gain Gain Bandwidth Source Current Sink Current Upper Clamp Voltage Lower Clamp Voltage MULTIPLIER SECTION Linear Operating Voltage Output Max. Slope Gain 8 8 8 VZ 1 VINV 1 Iq IINV GV GB 2 ICOMP 2 VCOMP 3 VMULT △VCS △VMULT K TEST CONDITIONS CL=1nF @ 70KHz In OVP condition Vpin1=2.7V VPIN5≤150mV, VCC>VCC off VPIN5≤150mV, VCC<VCC off ICC=20mA TA=25℃ 10.3V<VCC<18V VCC=10.3 ~ 18V Open loop VCOMP=4V, VINV=2.4V VCOMP=4V, VINV=2.6V ISOURCE=0.5mA ISINK=0.5mA TYP MAX UNIT 11 14 7.2 6.5 15.3 7.9 18 16.5 8.7 8.3 V V V V 50 9 15 6.8 6 10 24 μA mA mA mA mA μA V 2.535 2.56 5 -1000 V V mV uA dB MHz mA mA V V 30 6 10 4 18 7 21 2.465 2.44 2.5 60 -2 2.5 4.5 2.25 3 -100 80 0.8 -4 4.5 5 2.4 -8 5.5 2.55 0~ 2.5 0 ~ 3.5 VMULT=from 0V ~ 0.5V VCOMP=Upper ClamVoltage VMULT=1V, VCOMP=4V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.65 1.9 0.5 0.7 V 0.9 1/V 3 of 6 QW-R502-444.D L8561 LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) PARAMETER CURRENT SENSE COMPARATOR PIN SYMBOL Current Sense Reference Clamp 4 VCS Input Bias Current Delay to Output ZERO CURRENT DETECTOR Input Threshold Voltage Rising Edge Hysteresis Upper Clamp Voltage Upper Clamp Voltage Lower Clamp Voltage Sink Bias Current Source Current Capability Sink Current Capability Disable threshold Restart Current After Disable OUTPUT SECTION 4 4 ICS TD(H-L) Dropout Voltage 5 5 5 5 5 5 5 5 5 7 VZCD VZCD VZCD VZCD IZCD IZCD IZCD VDIS IZCD VGD TEST CONDITIONS VMULT=2.5V VCOMP=Upper Clamp Voltage VOS=0 (Note 1) (Note 1) IZCD=20μA IZCD=3mA IZCD=3mA 1V≦VZCD≦4.5V VZCD<VDIS, VCC>VCOFF IGD(SOURCR)=200mA IGD(SOURCR)=20mA IGD(SINK)=200mA IGD(SINK)=20mA CL=1nF CL=1nF VCC=3.5V, VGD=1V Output Voltage Rise Time 7 tR Output Voltage Fall Time 7 tF IGD Sink Current 7 IGD (OFF) OUTPUT OVERVOLTAGE SECTION OVP Triggering Current 2 IOVP Static OVP Threshold RESTART TIMER Start Timer tSTART Note: 1. Parameter guaranteed by design, not tested in production. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 1.6 1.7 1.8 V -0.05 200 -1 450 μA ns 2.1 0.6 6.5 6.6 0.7 2 0.8 7.3 7.5 1 0.4 5.9 6.1 0.3 -3 3 100 -20 200 -50 1.2 0.8 1.2 MAX UNIT -10 10 300 V V V V V μA mA mA mV μA 2 1.2 1.9 1.2 100 100 V V V V ns ns mA 10 40 40 40 30 2.25 40 2.4 50 2.55 μA V 70 130 300 μs 4 of 6 QW-R502-444.D L8561 LINEAR INTEGRATED CIRCUIT TYPICAL APPLICATION CIRCUIT (150W, Wide-range Mains) D1 BYC5-600 T1 PFC CHOKE 11 7 F1 3 2.0A/250V ~ VAC (90V~264V) BD1 1 2KBP06M + 2 4 R1 620K/ 1206 R2 2 62K/1206 R6 620K/ 1206 R7 56K/1206 C1 10nF/0805 6 C3 1μF/0805 5 2 3 MULT UTC C8 10nF/ 0805 8 VCC L8561 GD GND CS C6 22μF/50V 6 4 ZD1 ZD18.0 R9 750K/1206 1 ZCD COMP INV R14 10K/ 0805 R4 750K/1206 R8 22K/1206 R5 10K/0805 R3 110/ 0805 D2 1N4148 C4 1μF/ 400V + R13 7 10/1206 D3 1N4148 R16 0.47/1W Q1 12N65 R11 19K/ 0.25W R17 0.47/1W C5 120μF/ 450V R12 19K/ 0.25W - UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R502-444.D L8561 LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS Output ripple at 0.5W VIN=115V 100V 100V/div 100V/div VIN=90V 0 0 10 Time (2s/div) 100V 0 20 0 100V 0 0 20 VIN=264V 100V/div 100V/div VIN=230V 10 Time (2s/div) 10 Time (2s/div) 20 100V 0 0 10 Time (2s/div) 20 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-444.D