UTC-IC LIS05AF-20

UNISONIC TECHNOLOGIES CO., LTD
LIS05AF-20
I NFRARED LAMP LED
LIS05AF-20
„
DESCRIPTION
The UTC LIS05AF-20 is kind of a infrared lamp led which is
specially applicatted for the lamp. The features include: free air
transmission system, opto-electronic switch and floppy disk drive.
„
FEATURES
* With Infrared applied system
* Internal smoke detector
„
ORDERING INFORMATION
Ordering Number
LIS05AF-20
www.unisonic.com.tw
Copyright © 2008 Unisonic Technologies Co., Ltd
1 of 4
QW-R125-022.A
LIS05AF-20
„
I NFRARED LAMP LED
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
UNIT
Reverse Voltage
VR
5
V
Forward Current
IF
20
mA
Peak Forward current (Note 2)
IFM
1000
mA
Power Dissipation
PD
150
mW
℃
Operation Temperature
TA
-30~+65
℃
Lead Soldering Temperature (Note 3)
TSD
260
℃
Storage Temperature
TSTG
-40~+80
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. IFP Conditions----Pulse WIdth ≤100s and Duty≤ 1%.(Pulse test)
3. t ≤5s,to shell 2mm
„
ELECTRICAL CHARACTERISTICS (TA=25℃, unless otherwise specified)
PARAMETER
Forward Voltage
Reverse Current
Radiant Intensity
Peak Wavelength
Spectral Radiation Bandwidth
Viewing Angle
Rise Time
Fall Time
SYMBOL
VF
IR
Ee
λp
Δλ
2θ1/2
TR
TF
TEST CONDITIONS
I F=20mA
VR=5V
I F=20mA
I F=20mA
I F=20mA
IF=20mA
IF=20mA
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
1.1
0
30
TYP
850
45
20
2
1
MAX UNIT
1.5
V
10
μA
38 mW/sr
nm
nm
deg
μs
μs
2 of 4
QW-R125-022.A
LIS05AF-20
„
I NFRARED LAMP LED
TYPICAL CHARACTERISTICS
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 4
QW-R125-022.A
LIS05AF-20
I NFRARED LAMP LED
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R125-022.A