UNISONIC TECHNOLOGIES CO., LTD Preliminary UTT30N10 Power MOSFET 30A, 100V N-CHANNEL POWER MOSFET DESCRIPTION The UTC UTT30N10 is a N-channel mode power MOSFET using UTC’s advanced technology to provide customers with a minimum on-state resistance, low gate charge and high switching speed. The UTC UTT30N10 is suitable for high voltage synchronous rectifier and DC/DC converters, etc. FEATURES * RDS(ON)=32mΩ @ VGS=10V,ID=30A * Low Gate Charge (Typical 18.5nC) * High Switching Speed SYMBOL 2.Drain 1.Gate 3.Source ORDERING INFORMATION Ordering Number Lead Free Halogen Free UTT30N10L-TA3-T UTT30N10G-TA3-T UTT30N10L-TN3-T UTT30N10G-TN3-T UTT30N10L-TN3-R UTT30N10G-TN3-R Note: Pin Assignment: G: Gate D: Drain S: Source www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Package TO-220 TO-252 TO-252 Pin Assignment 1 2 3 G D S G D S G D S Packing Tube Tube Tape Reel 1 of 5 QW-R502-661.c UTT30N10 Preliminary Power MOSFET ABSOLUTE MAXIMUM RATINGS (TC=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Drain-Source Voltage VDSS 100 V Gate-Source Voltage VGSS ±20 V Continuous ID 30 A (VGS=10V) TC=25°C Drain Current Pulsed IDM 120 A Single Pulsed Avalanche Energy (Note 2) EAS 55 mJ TO-220 79 Power Dissipation PD W TO-252 44 Junction Temperature TJ +150 °C Storage Temperature TSTG -55~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Starting TJ = 25°C, L = 0.27mH, IAS = 30A. 3. Pulse Width = 100s THERMAL DATA PARAMETER TO-220 Junction to Ambient TO-252 TO-220 Junction to Case TO-252 SYMBOL RATINGS 62 110 1.58 2.85 θJA θJC UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage Drain-Source Leakage Current Forward Gate- Source Leakage Current Reverse ON CHARACTERISTICS Gate Threshold Voltage SYMBOL Static Drain-Source On-State Resistance RDS(ON) BVDSS IDSS IGSS VGS(TH) TEST CONDITIONS ID=250µA, VGS=0V VDS=100V, VGS=0V VGS=+20V, VDS=0V VGS=-20V, VDS=0V 100 VDS=VGS, ID=250µA VGS=10V, ID=30A VGS=6V, ID=15A 1 DYNAMIC PARAMETERS Input Capacitance CISS VGS=0V, VDS=25V, f=1.0MHz Output Capacitance COSS Reverse Transfer Capacitance CRSS SWITCHING PARAMETERS Total Gate Charge at 10V QG VGS=0~10V,VDD=50V,ID=30A,IG=1.0mA Gate to Source Charge QGS VDD=50V, ID=30A, IG=1.0mA Gate to Drain Charge QGD Turn-ON Time tON Turn-ON Delay Time tD(ON) VDD=50V, ID=30A, VGS=10V, RGS=16Ω Rise Time tR Turn-OFF Delay Time tD(OFF) SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS ISD=30A Drain-Source Diode Forward Voltage VSD ISD=15A UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT V 1 µA +100 nA -100 nA 32 40 3 43 72 1250 190 45 18.5 6.5 4.6 V mΩ mΩ pF pF pF 28 83 nC nC nC ns ns ns ns 1.25 1.0 V V 9 46 26 2 of 5 QW-R502-661.c UTT30N10 Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS VGS Same Type as DUT 12V QG 10V 200nF 50kΩ QGS VDS 300nF QGD VGS DUT 3mA Charge Gate Charge Test Circuit Gate Charge Waveforms Resistive Switching Test Circuit Resistive Switching Waveforms 2 EAS= 1 2 LIAS VDS RG BVDSS BVDSS-VDD BVDSS ID L IAS 10V ID(t) DUT tP VDD VDD VDS(t) tP Unclamped Inductive Switching Test Circuit UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Time Unclamped Inductive Switching Waveforms 3 of 5 QW-R502-661.c UTT30N10 Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS(Cont.) + DUT VDS RG L ISD VGS VDD Driver Same Type as DUT dv/dt controlled by RG ISD controlled by pulse period VGS (Driver ) D= Gate Pulse Width Gate Pulse Period 10V IFM, Body Diode Forward Current ISD (DUT) di/dt IRM Body Diode Reverse Current VDS (DUT) Body Diode Recovery dv/dt VSD VDD Body Diode Forward Voltage Drop Peak Diode Recovery dv/dt Test Circuit and Waveforms UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-661.c UTT30N10 Preliminary Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-661.c