Ultra High Efficiency 94-96% High-Speed Response Step-Down DC-DC Converter VSV - m3,m6,m8 VSV-m3, m6, m8 is an ultra small size (15×24×4mm size) and light weight (2.6g) step-down DC-DC converter, which has achieved maximum 26W. Since it can correspond from ultra low output voltage of 1.0V, it can be used for the latest DSP, ASIC applications. Due to high-speed response, high efficiency by synchronous rectification circuit technology, saving space by no external components, an excellent performance beyond our common sense has been achieved. <Features> - Latest Power-IC adopted - Adjustable Output - High-speed Response - Non-Isolated Type Converter - Efficiency 94%, 96% - Ultra Minimum Size - ON/OFF Control - Operating Temp. -40°C to +85°C - Heat Sink not required - High Reliability, High Performance - The Latest Technology, Synchronous Rectification Circuit - Additional external capacitor not required - Short-Circuit, Over-Current Protection - RoHs Compliance <Model, Rating> Model VSV-3.3S3R0M VSV-3.3S6R0M VSV-3.3S8R0M Table 1 Rating Input Voltage Vdc Rating Output Voltage Vdc 5.0 (3.0-5.5) 3.3 (1.0-3.3) Rating Output No-Load Input Ripple Noise Current Current mVpp(typ.) A mA(typ.) 3 30 30 6 50 60 8 70 50 Efficiency Package %(typ.) 96 Type 94 SMD 96 Note 1: Rating input voltage ( ) is the voltage range, and the input voltage needs to be 0.5V or more compared to the output voltage. Note 2: Rating output voltage ( ) is the adjustable range. Table 2 <Specification> VSV-3.3S3R0M Input voltage/range Output voltage accuracy Line regulation Load regulation Temperature coefficient Adjustable output range Ripple & Noise Efficiency Over-Current Protection Over-Voltage Protection No Load Input Current Remote on/off control UVLO start up voltage UVLO end voltage P-Good output VSV-3.3S6R0M VSV-3.3S8R0M Refer to Table 1. +3.3V±3％ 0.5% typ. 1.0% typ. ±0.02%/ ℃ typ. 1.0-3.3V 30mVp-p typ. 50mVp-p typ. 50mVp-p typ. 96%typ. 94%typ. 96%typ. Operates at 105% or more rating load, auto recovery type. None 30ｍAtyp. 60mAtyp. 70mAtyp. Conditions VAR pin open. For the regulation of Vin=3-5.5 For the regulation of Iout=0A-rating For the regulation of Ta=-40 to＋50°C Refer to table 1 BW=20MHｚ Avoid long-time short-circuit condition. Refer to page 3, adjusting voltage setting. Iout=0A Between 5pin(RC)－3pin(S.GND) [Open: Output ON, Short: Output OFF] 2.8V typ. 2.7V typ. Refer to page 4, ON/OFF control. At normal output : H, At output dropping : L (0-0.4V Vin=+5V Sinks current=9mA Refer to page 4, power good output. or below) Operating temp. range Storage temperature range Humidity range Cooling condition Vibration Operating Temp. -40°C to +85°C Storage Temp. -40℃ to +85°C (+125°C at baking) 20%- 95%R.Hmax. (Ma. Wet-bulb temp. 35°C, non-condensing) Refer to the thermal derating on page 6. 5-10Hz All amplitude 10mm (1 hour in each of 3 directional axes), 10-55Hz acceleration 2G (1 hour in each of 3 directional axes) Shock Acceleration 20G (3 directions, 3 times each), Shocking time 11±5ms MTBF 1,000,000 Hrs Weight 2.6g typ. Outline SMD type W=15 L=24 H=4.0 typ. (mm) * Unless otherwise specified, input and output is the rating value and ambient temperature is +25°C. Kaga Electronics/Volgen DC-DC CONVERTERS Refer to page 6, temp. derating. Refer to the outline on page 2 for detail dimensions. www.volgen.com Ultra High Efficiency 94-96% High-Speed Response Step-Down DC-DC Converter VSV - m3,m6,m8 <Outline> 20.32 15.24 8.89 3.81 6.35±0.2 1.27±0.2 （3） （2） （1） （1.90） （6） （7） （8） (6.50) 1.33±0.2 (0.4) 1.33±0.2 (6.90) 3.81±0.2 pick-up position (14.9) 1.27±0.2 (1) (6.3) 15.0±0.5 （5） （4） 3.81±0.2 3.81±0.2 7.62±0.2 Label location (1.90) 1.27±0.2 3.18±0.2 5.40 24.0±0.5 (1.90) 4.0max. 16.50 0.8 General tolerance: ±0.5 Dimensions: mm Pin Name VAR 1 2 +Vo 3 SG 4 +Vi 5 RC 6 PWGD 7 HS 8 NC Function Vout Setting +Output GND(in/out) +Input On/off control Power good Heat sink No connection Figure 1 <Lot Number Display> 515 06 Production control no. Production week (week01=the first week of January. 15=week15） Production year (last digit amoung four, 2005=5) <Block Diagram> FET1 POWER IC ＋Vi (4) L1 +Vo (2) R1 control C1 FET2 RC (5) ON/OFF PWGD (6) PWGD VAR (1) C2 VFB + R2 SG (3) Figure 2 Kaga Electronics/Volgen DC-DC CONVERTERS BDD20070920V3 2