SF101FC WILLAS THRU SF108FC 10.0 AMP GLASS PASSIVATED SUPER FAST RECTIFIER ITO-220 PACKAGE FEATURES * Low switching noise * Low thermal resistance * High current capability * Super fast switching speed * High reliability * Good for switching mode circuit * Glass passivated junction * RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" .114(2.9) .098(2.5) Pb Free Product .187(4.70) .406(10.3) .138(3.50) .169(4.30) .122(3.10) .382(9.70) .134(3.40) .110(2.80) .602(15.3) .579(14.7) MECHANICAL DATA .055(1.40) * Case: ITO-220 Molded plastic * Epoxy: UL 94V-O rate flame retardant * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 1.8 gram .154(3.90) .114(2.90) .138(3.50) .098(2.50) .039(1.00) .531(13.5) .039(1.00) .023(0.60) .492(12.5) .031(0.80) .016(0.40) .108(2.75) .091(2.30) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS SYMBOL Marking Code Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current IO at TC = 125℃ Peak Forward Surge Current 8.3 ms single half sine-wave IFSM superimposed on rated load (JEDEC method) Typical Thermal Resistance RΘJA Typical Junction Capacitance (Note 2) CJ Operating Temperature Range TJ Storage Temperature Range TSTG CHARACTERISTICS SYMBOL Maximum Forward Voltage at 5.0A DC(Note 3) Maximum Average Reverse Current at @TC=25℃ Rated DC Blocking Voltage @TC=100℃ Maximum Reverse Recovery Time (Note 1) VF SF101FC SF102FC SF103FC SF104FC SF105FC SF106FC SF108FC SF101C 50 35 50 100 70 100 150 105 150 200 140 200 300 210 300 400 280 400 600 420 600 Amps 100 Amps 3 ℃/W 30 PF -65 to +150 -65 to +150 ℃ ℃ SF101FC SF102FC SF103FC SF104FC SF105FC SF106FC SF108FC Trr Volts Volts Volts 10.0 50 IR UNIT SF102C SF103C SF104C SF105C SF106C SF108C 1.00 1.35 10.0 500 35 1.75 UNIT Volts μAmps nS NOTES :1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. Suffix “A” =Common Anode. 2005.12 WILLAS ELECTRONIC CORP. SF101FC WILLAS THRU SF108FC 10.0 AMP GLASS PASSIVATED SUPER FAST RECTIFIER ITO-220 PACKAGE 1000 10 7.5 5 Single Phase Half Wave 60Hz Inductive or Resistive Load 2.5 0 PEAK FORWARD SURGE CURRENT, (A) 150 FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 125 TC = 100 100 10 TC = 25 1.0 100 0.1 80 0 8.3ms Single Half Sine-Wave (JEDEC Method) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 60 40 20 0 1 INSTANTANEOUS FORWARD CURRENT, (A) 50 100 CASE TEMPERATURE, ( ) INSTANTANEOUS REVERSE CURRENT, (uA) 12.5 0 2005.12 FIG. 2 - TYPICAL REVERSE CHARACTERISTICS FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 40 20 C 10 F 04 1 SF ~ FC 4 08 01 F1 S 2 10 SF 5F 1 SF FC C~ 1.0 .4 TJ=25 Pulse Width = 300uS 1% Duty Cycle .2 .1 .6 .7 .8 .9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( SF101FC THRU SF108FC ) 200 100 60 SF1 01F 40 20 SF1 10 6 TJ = 25 05F C~S C~S F10 4FC F10 8 FC 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V ) WILLAS ELECTRONIC CORP.