CLV0462A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Wireless Modems • Fixed Wireless • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 430 Typ Max Units 495 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -114 dBc/Hz Harmonic Suppression (2nd) -20 dBc Tuning Voltage 0.5 4.5 MHz/V 27 Tuning Sensitivity (avg.) -2 dBm Input Capacitance 50 pF Pushing 1 MHz/V Pulling (12 dB Return Loss, Any Phase) .5 MHz 85 °C Max Units Power Output -6 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements -4 Vdc MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 4.5 Supply Current (Icc) 34 Vdc 41 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CLV0462A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 540 FREQUENCY (MHz) 520 500 480 460 85 °C 25 °C 440 -40 °C 420 400 380 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0 -1 -2 -3 -4 0.030 MIN. CUTBACK FROM LIVE PADS -5 -6 -7 -8 401 416 430 444 457 471 484 496 508 520 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B