SMV0285A PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Portable Radios • RF Modems • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 260 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -95 Harmonic Suppression (2nd) -30 Tuning Voltage 0.25 Max Units 310 MHz dBc/Hz -15 dBc 3.05 Vdc MHz/V 25 Tuning Sensitivity (avg.) -7 dBm 500 pF Pushing 5 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output -16 Load Impedance -11.5 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) SUB-L Min Typ 3.3 7 Vdc 11 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV0285A Voltage-Controlled Oscillator Surface Mount Module Rev B2 Tuning Curve, typ. 340 FREQUENCY (MHz) 330 320 310 300 85 °C 25 °C 290 280 270 -40 °C 260 250 240 230 220 0 0.5 1 1.5 2 2.5 3 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS 243 258 270 284 297 307 315 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B