SMV1132A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Fixed Wireless • Test Equipment • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1112 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -103 Harmonic Suppression (2nd) -20 Tuning Voltage 0.5 Max Units 1152 MHz dBc/Hz -15 dBc 2.7 Vdc MHz/V 62 Tuning Sensitivity (avg.) 5 dBm Input Capacitance 50 pF Pushing 4 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output -3.5 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements .75 SUB-L Min Typ Supply Voltage (Vcc, nom.) 3.1 Supply Current (Icc) 12 Vdc 15 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV1132A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 1220 FREQUENCY (MHz) 1200 1180 1160 1140 1100 85 °C 25 °C 1080 -40 °C 1120 1060 1040 1020 1000 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 2.7 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 5 4 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 3 2 1 0 -1 -2 -3 0.030 MIN. CUTBACK FROM LIVE PADS -4 -5 -6 1025 1043 1060 1075 1091 1106 1122 1138 1153 1169 1185 1199 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B