V585ME79-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Video • Broadband Transmission • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 950 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -98 Harmonic Suppression (2nd) -30 Tuning Voltage 1 Max Units 1750 MHz dBc/Hz -20 dBc 10 Vdc MHz/V 103 Tuning Sensitivity (avg.) 7 dBm 500 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) 3 MHz 75 °C Max Units Power Output 1 Load Impedance 4 50 Input Capacitance Operating Temperature Range -30 Package Style Power Supply Requirements MINI-16-L Min Typ Supply Voltage (Vcc, nom.) 10 Supply Current (Icc) 32 Vdc 39 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V585ME79-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 1900 FREQUENCY (MHz) 1800 1700 1600 1500 75 °C 25 °C 1400 1300 1200 -30 °C 1100 1000 900 800 700 0 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 10 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 9 8 7 6 5 4 0.030 MIN. CUTBACK FROM LIVE PADS 3 2 1 0 784 885 984 1082 1185 1293 1401 1505 1605 1698 1787 FREQUENCY (MHz) 75 °C 25 °C -30 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-16 0.220 MINI-16-LOW 0.160 MINI-16-L 0.130 MINI-16-UL 0.100 MINI-16-EL 0.085 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B