V585ME25 PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Satellite Communications • Test Instrumentation • CATV Headend Equipment £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1250 Typ Max Units 2050 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -95 dBc/Hz Harmonic Suppression (2nd) -15 dBc Tuning Voltage 1 20 MHz/V 62 Tuning Sensitivity (avg.) 9.5 dBm 100 pF Pushing 3 MHz/V Pulling (14 dB Return Loss, Any Phase) 15 MHz 75 °C Max Units Power Output 4.5 Load Impedance 7 Vdc 50 Input Capacitance Operating Temperature Range -10 Package Style Power Supply Requirements MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 18 Vdc 22 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V585ME25 Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 2300 2100 1900 75 °C 25 °C 1700 1500 1300 -10 °C 1100 900 700 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 16 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 14 12 10 8 0.030 MIN. CUTBACK FROM LIVE PADS 6 4 2 0 816 1025 1179 1309 1431 1554 1682 1815 1944 2061 2159 FREQUENCY (MHz) 75 °C 25 °C -10 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B