3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC • Supports LVDS Channel Link™ signaling • 20 shielded pairs (100 ohm) +4 drains for high bandwidth applications • High density 50 position MDR with rugged ribbon type contact • 3 Unshielded Twisted 28 AWG Pairs • EMI shielded junction shell in either plastic or over-molded construction • Rugged thumbscrew retention • RoHS* compliant Date Modified: May 12, 2006 TS-2103-03 Sheet 1 of 4 Physical Connector Contact Plating Wiping Area: 30μ″ [ 0.76μm ] Min. Gold Shell Color: Beige Material: Acrylonitrile Butadiene Styrene (ABS) Cable Color: Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1A Insulation Resistance: > 1 × 108Ω at @100 Vdc Withstanding Voltage: 350 Vrms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 ± 10Ω Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Environmental Temperature Rating: -20°C to +75°C *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E86982 3M Interconnect Solutions http://www.3M.com/interconnects/ Channel Link is a trademark of National Semiconductor. 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC Over-Molded #4-40 Thumbscrew 50 Position High Density Mini D Ribbon (MDR) Male Plug 50 Position High Density Mini D Ribbon (MDR) Male Plug Cable (See pinout for cable construction) 2X Thumbscrew #4-40 thread 2X Thumbscrew #4-40 thread 45.7 1.8 45.7 1.8 LENGTH (See ordering information) 54.9 2.2 2 1 6 4 3 5 7 8 10 12 14 16 18 20 22 24 9 11 13 15 17 19 21 23 25 15.5 0.6 26 28 30 32 34 36 38 40 42 44 46 48 50 27 29 31 33 35 37 39 41 43 45 47 49 46.5 1.8 mm [Inch] Assembly Length Tolerance Cable Length: 0.5 to 1.5 meters -0 + .05 meters 2 to 10 meters -0 +3% of length Tolerance Unless Noted mm 0.0 0.00 ± .1 ± .10 [ ] Dimensions for Reference only Generic End Detail MDR 50 Position Plug ( Both Ends ) Ordering Information 14X50-SZWB-XXX-0NC Backshell Options: T = Over-molded 4-40 thumbscrew B = Discrete 4-40 thumbscrew shell kit 3M Interconnect Solutions http://www.3M.com/interconnects/ Length: 100 = 1.0 meters 200 = 2.0 meters 500 = 5.0 meters TS-2103-03 Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC Discrete #4-40 Thumbscrew 50 Position High Density Mini D Ribbon (MDR) Male Plug 50 Position High Density Mini D Ribbon (MDR) Male Plug Cable (See pinout for cable construction) 2X Thumbscrew #4-40 thread 32.5 1.3 2X Thumbscrew #4-40 thread 32.5 1.3 LENGTH (See ordering information) 54.4 2.1 2 1 6 4 3 5 7 8 10 12 14 16 18 20 22 24 9 11 13 15 17 19 21 23 25 13.0 0.5 26 28 30 32 34 36 38 40 42 44 46 48 50 27 29 31 33 35 37 39 41 43 45 47 49 46.5 1.8 Generic End Detail MDR 50 Position Plug ( Both Ends ) mm [Inch] Assembly Length Tolerance Cable Length: 0.5 to 1.5 meters -0 + .05 meters 2 to 10 meters -0 +3% of length Tolerance Unless Noted mm 0.0 0.00 ± .1 ± .10 [ ] Dimensions for Reference only Note: 1. Use 3341-31 jacksocket for mounting receptacle to panel. 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-2103-03 Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC MDR 50 Position Pinout (F50-13) P1 Pair Signal 1 1 P2 Position Position Signal A0M 1 38 A0P 26 14 2 A1M 2 39 DDC SDA 2 A1P 27 15 3 A2M 3 3 A2P 28 4 CLK1M 4 4 CLK1P 5 A3M 5 A3P N/A N/A 6 Pair Pair Signal Position Position DDC Gnd TP2 1 DDC SCL TP2 1 TP3 A8M 40 16 41 29 5 30 Shield 1 Shield 1 A4M 7 6 A4P 32 7 A5M 8 7 A5P 33 8 A6M 9 Signal Pair A0M 1 38 DDC Gnd TP2 A0P 26 14 DDC SCL TP2 2 A1M 2 39 DDC SDA TP3 11 2 A1P 27 15 A8M 11 A8P 11 3 A2M 3 40 A8P 11 A9M 12 3 A2P 28 16 A9M 12 A9P 12 4 CLK1M 4 41 A9P 12 17 A10M 13 4 CLK1P 29 17 A10M 13 42 A10P 13 5 A3M 5 42 A10P 13 18 CLK3M 14 5 A3P 30 18 CLK3M 14 6 43 CLK3P 14 N/A Shield 1 6 43 CLK3P 14 31 19 A11M 15 N/A Shield 1 31 19 A11M 15 44 A11P 15 6 A4M 7 44 A11P 15 20 Shield 4 N/A 6 A4P 32 20 Shield 4 N/A 45 Shield 3 N/A 7 A5M 8 45 Shield 3 N/A 21 A12M 16 7 A5P 33 21 A12M 16 46 A12P 16 8 A6M 9 46 A12P 16 8 A6P 34 22 A13M 17 8 A6P 34 22 A13M 17 9 A7M 10 47 A13P 17 9 A7M 10 47 A13P 17 9 A7P 35 23 A14M 18 9 A7P 35 23 A14M 18 10 CLK2M 11 48 A14P 18 10 CLK2M 11 48 A14P 18 10 CLK2P 36 24 A15M 19 10 CLK2P 36 24 A15M 19 TP1 twpr- 12 49 A15P 19 TP1 twpr- 12 49 A15P 19 TP1 twpr+ 37 25 CLK4M 20 TP1 twpr+ 37 25 CLK4M 20 TP3 DDC+5V 13 50 CLK4P 20 TP3 DDC+5V 13 50 CLK4P 20 Notes: 1. All pairs are individually shielded with aluminum foil. 2. Pair shields are wrapped Aluminum out and in contact with six internal drains (logic ground). 3. Outer braid and foil (chassis ground) is isolated from inner drains (logic ground). TS-2103-03 Sheet 4 of 4 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. © 3M 2006