RF Filter 100 KHz to 5.2 GHz Single in line package The content of this specification may change without notification 09/18/08 Wide Band RF Eliminate Filter KHLC-06s Feature ⋅ Single in Line Package ⋅ Broad Bandwidth: 100 kHz to 5.2 GHz (-20 dB) ⋅ Comply with Large Current (1.75 A) Nowadays, the digital clock signal which is used as high frequency applications makes the harmonic wave delivered to the DC power supplies extend the frequency range in GHz with one digit to two digits. Under this circumstance in performing a digital signal in high speed transmission, only the conventional method like using a bypass capacitor can not remove high harmonic wave which is transmitted to the power supplies. KHLC-06s which is designed in the power supply line of the electrical circuit can deletes harmonic wave signal which is not necessary to be transmitted in very broad bandwidth of 0.10 MHz to 5200 MHz (-20 dB) and performs in extent to 4700 MHz from -30 dB attenuation band area. KHLC-06s is in single in line package which can be mounted near the electric power supply terminals and is made ideal mounting position electrically. Value (max.) Unit Rated Current 1,750 mA Rated Voltage 10 V +240 (8 sec) C Operating Temperature −40 ~ +85 C Storage Temperature −65 ~ +150 C Soldering Temperature 0 -10 -20 -30 -40 -50 -60 -70 1M 10G Frequency [ Hz ] Electrical Specifications Absolute Maximum Rating Parameter Isolation vs Frequency Value Condition 100kHz ~ 5.2GHz (Typ.) −20 dB 350kHz ~ 4.7GHz (Typ.) −30 dB 0.1 Ω max. − Parameter Band Width DC Resistance Dimensions Schematics UNIT : mm 4.0 Lo KF2 3 C1 Cp2 1 2 3 Cp3 3.5 Cp1 4.3 KF1 1 2 1.80 ± 0.05 1.27 1: Vcc (IN) 2: GND 3: Vcc (OUT) 0.4 Specifications of products are subject to change without notice. American Accurate Components, Inc. 0.15 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889