SPECIFICATION FOR APPROVAL PAGE: 1 REF : PROD. NAME ABC'S DWG NO. SHIELDED SMD POWER INDUCTOR SU8058□□□□F□-□□□ ABC'S ITEM NO. Ⅰ﹒CONFIGURATION & DIMENSIONS： B 100 Marking White A B C D E F G H I H 8.00 ±0.3 8.00 ±0.3 5.80 ±0.3 2.40 typ. 3.20 typ. 6.40 typ. 3.40 ref. 6.20 ref. 1.40 ref. m/m m/m m/m m/m m/m m/m m/m m/m m/m I G H I : : : : : : : : : I A G H D I I F or G D H I E I I G ( PCB Pattern suggestion ) Ⅱ﹒SCHEMATIC DIAGRAM： a c b Ⅲ﹒MATERIALS： a﹒Core：Ferrite DR core b﹒Core：Ferrite RI core c﹒Wire ：Enamelled copper wire ( Class F ) d﹒Adhesive ：Epoxy resin e﹒Terminal：Ag/Ni/Sn f﹒Remark：Products comply with RoHS' requirements d e Peak Temp：260℃ max. Max time above 230℃ ：50sec max. Max time above 200℃ ：70sec max. Temperature Rising Area Preheat Area Reflow Area +4.0℃ / sec max. 150 ~ 200℃ / 60 ~ 120sec +2.0 ~ 4.0℃ / sec max. Forced Cooling Area -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 260℃ 250 a﹒Temp. rise ：40℃ typ. b﹒Rated current： Base on temp. rise & △L / L0A=35% typ. c﹒Storage temp.：-40℃ ----+125℃ d﹒Operating temp.：-40℃----+105℃ e﹒Resistance to solder heat：260℃.10 secs. AR-001A 50sec max. Temperature ( ℃ ) Ⅳ﹒GENERAL SPECIFICATION： 230℃ 200 150 70sec max. 100 50 0 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL REF : PAGE: 2 PROD. ABC'S DWG NO. SHIELDED SMD POWER INDUCTOR NAME SU8058□□□□F□-□□□ ABC'S ITEM NO. Ⅴ﹒ ELECTRICAL CHARACTERISTICS： RDC ( mΩ ) typ. max. Irms (A) Isat (A) 45.0 12.0 16.0 6.50 4.50 7.96 35.0 14.0 17.5 5.80 3.90 100 7.96 30.0 16.0 20.0 5.50 4.00 20 100 2.52 18.0 18.6 25.0 4.60 3.00 22.0±30％ 20 100 2.52 14.0 42.0 52.0 3.40 1.80 SU8058330YF□-□□□ 33.0±30％ 16 100 2.52 10.0 58.0 72.0 2.70 1.60 SU8058470YF□-□□□ 47.0±30％ 12 100 2.52 7.0 80.0 100.0 2.30 1.50 SU8058680YF□-□□□ 68.0±30％ 16 100 2.52 6.0 100.0 130.0 2.00 1.20 SU8058101YF□-□□□ 100.0±30％ 22 100 0.796 5.0 124.0 160.0 1.70 0.90 SRF ( MHz ) typ. L(KHz) Q(MHz) Test Freq. Inductance ( µH ) Q ref. SU80583R9YF□-□□□ 3.9±30％ 8 100 7.96 SU80585R2YF□-□□□ 5.2±30％ 8 100 SU80586R8YF□-□□□ 6.8±30％ 8 SU8058100YF□-□□□ 10.0±30％ SU8058220YF□-□□□ DWG No. 1)﹒ ：Packaging Information... A ：Bulk □□□ B ：Taping Reel 2)﹒"":Reference code 3)﹒Inductance Test Freq.：100KHz / 0.1V 4)﹒Isat base on △L / L0A=35% typ. 5)﹒Irms base on Temp. rise 40℃ typ. @ Inductance VS. DC Superposition Characteristics 1000 101 Inductance ( uH ) 100 470 100 10 3R9 1 0.1 0.01 0.1 1 DC Current ( A ) AR-001A 10 SPECIFICATION FOR APPROVAL PAGE: 3 REF : PROD. ABC'S DWG NO. SHIELDED SMD POWER INDUCTOR NAME SU8058□□□□F□-□□□ ABC'S ITEM NO. Ⅵ﹒PACKAGING INFORMATION： ( 1 ) Configuration T Cover Tape N A B 2.0±0.5 ∮C ∮C D G Embossed carrier ※ Carrier tape width : D 4 m/m P : 12 m/m End Start 100 100 Leader no component 200 m/m min. 100 100 100 Trailer no component 400 m/m min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 13 - 16 330 B 21±0.8 C D 13±0.5 16 G 18 +0 N 50 -0 T 22.4 ( 3 ) Q'TY & G.W. Per package Inner : Reel Series SU8058 AR-001A Q'TY (pcs) 800 G.W. (gw) 1,350 Outer : Carton Style 13 - 16 Q'TY (pcs) 4,800 G.W. (Kg) 10.5 Size (cm) 40 x 40 x 24 SPECIFICATION FOR APPROVAL REF : PAGE: 4 PROD. NAME SHIELDED SMD POWER INDUCTOR ABC'S DWG NO. SU8058□□□□F□-□□□ ABC'S ITEM NO. Ⅶ﹒DWGING NUMBER EXPRESSION： S U 8 0 5 8 Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1：Product Classification L：Lead Free Standard products comply with RoHS' requirements 1 ~ 9：Lead Free Special products comply with RoHS' requirements Appendix code 2：Package Information Code AR-001A Inner package A T.B.D. B T / R ( Reel package ) Inner package Q'TY T.B.D. 800 pcs Remark SPECIFICATION FOR APPROVAL REF : PAGE: 5 PROD. NAME SHIELDED SMD POWER INDUCTOR ABC'S DWG NO. SU8058□□□□F□-□□□ ABC'S ITEM NO. Ⅷ﹒RELIABILITY TEST： Test item Solderability Thermal shock test ( Temp. cycle ) Specification Test condition More than 90% of the terminal electrode Shall be covered With fresh solder. Preheat : 150±25℃ for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5℃ Flux : Rosin Dip time : 4±1 seconds Inductance shall not change more than ±30% Room temp. 15 minutes -25±2 ℃ 30 minutes Room temp. 15 minutes 85±2 ℃ Total : 50 cycles Humidity Resistance test Temperature : 40±2℃ Humidity : 90 ~ 95% Applied current : Per spec. Time : 500 hours High temp. Resistance test Temperature : 105±2℃ Applied current : Per spec. Time : 500 hours AR-001A 30 minutes SPECIFICATION FOR APPROVAL REF : PROD. NAME PAGE: 6 SHIELDED SMD POWER INDUCTOR ABC'S DWG NO. SU8058□□□□F□-□□□ ABC'S ITEM NO. Ⅸ﹒UL CARD： OBMW2 Magnet Wire-Component September 8, 2000 E174837 JUNG SHING WIRE CO LTD 231 CHUNG CHENG RD, SEC 3 JEN-TEH HSIANG, TAINAN HSIEN TAIWAN Mtl Dsg AIW CFUEWB EIAIW EILOCKY EILOCKW EIW EIW-2 FL.EILOCKY LSFFW LSUEW PEW PEY SF.FLW SF.EIW SF.BY@ SF.FLY@ SF.BLOCKBS SF.EILOCKY# SF.EILOCKBS SF.BW@ SFFW Mark Dsg ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ BC Coat Typ Polyamideimide Polyurethane Polyesterimide Polyesterimide Polyesterimide Polyamideimide Polyamide Modified Epoxy ____ ____ Polyamide ____ ____ ____ ____Nylon ____ Nylon Nylon Modified Polyamide Polyamide Modified Polyamide ____ Polyesterimide Polyesterimide Modified Polyester Polyurethane Polyurethane Polyester Polyester Modified Polyester Polyesterimide Modified Polyester Modified Polyester Modified Polyester Polyesterimide Polyesterimide Modified Polyester Polyurethane 287806002 Mtl Dsg SFFY UEW-1 UEW-2 UEW-4 UEY UEY-2 OC ____ ____ ANSI Type MW81-C MW75C MW35C ___ ___ ___ MW74-C ___ MW79-C ___ ___ MW24-C MW26C MW77C MW27-C MW27-C ___ ___ ___ ____ ____ ____ ____ ____ BC Coat Typ 220 200 155 155 130 155 155 155 180 155 155 155 MW26C MW79 155 155 A not-for-profit organization dedicated to public safety and committed to quality service OC Polyamide ____ ____ ____ Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane 220 130 200 180 200 180 180 Page 1 of 2 Mark Dsg ____ Temp Class Nylon Polyamide ANSI Type MW80C MW2-C ___ MW75C MW28-C MW28-C Temp Class 155 105 130 130 130 130 @-May be suffixed by LZ; # - May be suffixed by LZ, EL or LZI. LZ - Signifies magned wires twisted together; EL - signifies base coated magnet wire laid parallel with top coat applied overall; LZL - signifies base coated magnet wire twisted together and covered with top coat overall. Marking: Company name or trademarks Recognized Component Mark. or 榮星電線 , material designation or marked designation on packaed or reel, and See General Information Preceding These Recognitions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc. 287806002 AR-001A Page 2 of 2 OBMW2⁄E174837 September 8 , 2000