SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR AP3S Pb RoHS Compliant FEATURES: • Performance comparable to fixed frequency oscillator • Lowest peak-to-peak jitter • Low supply current • Short lead time • Suitable for mass production • Alternative to long lead-time XO's Operating Temp. Range (See Options) Freq. stability over operating temp.* (See Options) Unit MHz MHz MHz °C Minimum 1 1 1 -10 ppm V V V mA -100 2.97 2.25 1.62 | | | | | | | | | | | | | | | For Small Quantities, Delivery Time is 1-5 days ELECTRICAL SPECIFICATIONS: Characteristics Frequency Range (3.3V) (2.5V) (1.8V) 3.2 x 2.5 x 1.2mm Typical ----- Maximum 200 166 133 60 -3.3 Input Voltage (Operating Vdd) 2.5 1.8 Input Current See Table 1 Output Type CMOS Output Load pF -15 Output "0" level (3.3V) V --(2.5V) V --(1.8V) V --Output "1" level (3.3V) V 2.97 -(2.5V) V 2.25 -(1.8V) V 1.62 -Symmetry % 50 45 Standby Current uA --Rise Time (10%->90% Vdd) nSec See Table 2 Fall Time (90%->10% Vdd) nSec See Table 2 Tri-state Function pin 1 : High or Open , pin 3 : Enable pin 1 : Low , pin 3 : Disable (Input to pin 1) Jitter peak-to-peak** psec -40 to 200 * Inclusive of calibration @25°C, operating temperature range, input voltage variation, load variation, aging, shock, and vibration. ** Jitter performance depends on programing parameter and output frequency. Please contact ABRACON for additional info. Table 1: Input Current Frequency MHz 1MHz ≤ F< 30MHz 30MHz ≤ F< 75MHz 75MHz ≤ F< 133MHz 133MHz ≤ F < 166MHz 166MHz ≤ F < 200MHz Input current (mA) 3.3V 2.5V 1.8V 10 8 6 15 10 8 20 15 12 22 15 25 - 100 3.63 2.75 1.98 -0.33 0.25 0.18 ---55 10 -- Table 2: Rise and Fall Time Frequency Rise / Fall Time (ns) 3.3V MHz 2.5V 1.8V 1MHz ≤ F< 10MHz 6 8 10 10MHz ≤ F 5 5 6 OPTIONS & PART IDENTIFICATION: (Left blank if standard) AP3S -Frequency- - - Supply Voltage Blank* 3.3 V 1 2.5 V 2 1.8 V *3.3V : Standard Operating Temp. 0°C to +50°C I '-20°C to +70°C E -30°C to +70°C F -30°C to +85°C N -40°C to +85°C L Freq. Stability J (***) ±20ppm R ±25ppm K ±30ppm C ±50ppm PIN 1(Option) **Blank OE **B PDB Packaging Bulk Ask for Tube Package Blank T Tape and Reel (***) Available for I, or E temp options only Contact ABRACON for EJ or LR options (Availability is limited) ** OE: Tri-state the output buffer ** PDB: Tri-state the output buffer & shut-off the oscillator, <10μA when PDB enabled ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.24.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR AP3S OUTLINE DRAWING: Pb RoHS Compliant 3.2 x 2.5 x 1.2mm | | | | | | | | | | | | | | | TEST CIRCUIT: Dimensions: inch (mm) Note: It is recommended to use an approximately 0.01uF bypass capacitor between PIN 2 and 4. Dimensions: mm PIN #1 #2 CONNECTION STAND-BY / OE GND/CASE #3 #4 OUTPUT VDD TAPE & REEL: Tape and reel 1,000 pcs/reel Dimensions: mm ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.24.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com