APAX-5520CE PC-based Controller with XScale CPU Features NEW Onboard XScale® PXA270 520 MHz processor 64 MB SDRAM on board, 32 MB Flash Expands I/O by connecting with APAX-5000 I/O modules Windows CE .NET ready platform 1 x VGA port for display and 1 x USB port 1 x CompactFlash slot for data storage 1 x 10/100 Mbps LAN and 1 x RS-485 Provides C/C++ and .NET class libraries for I/O control and communication RoHS COMPLIANT 2002/95/EC Introduction APAX-5520CE is a very compact and cost effective controller with XScale PXA270 CPU. The built-in Windows CE operating system makes APAX-5520CE a ready application platform to shorten development time. Connecting with other APAX-5000 I/O modules, APAX-5520CE can become a standalone control system. By C/C++ and .NET libraries for the I/O modules, developers can build their applications under the Windows development environment in a short amount of time. Specifications General Control System CPU XScale PXA270 520 MHz Memory Flash 32M bytes, SDRAM 64M bytes Battery Backup Memory256 KB file system, 256 KB direct access Operating System Windows CE.NET Real-time Clock Yes Watchdog Timer Yes Control Software C/C++ and .NET library with utility VGA DB15 connector USB Ports 1 x USB 1.1 Storage 1 x Type II CompactFlash card slot (internal) Communication (Ethernet) LAN Protocol 1 x RJ-45 Port, 10/100 Mbps Modbus/TCP Server and Client Communication (Serial) Medium Maximum Nodes Protocol RS-485 (2-wire) 32 (in RS-485 daisy-chain network) Modbus/RTU Master and Slave PC-based Controllers & I/O Modules Dimensions (W x H x D)30 x 139 x 100 mm Weight 210 g Power Consumption 4.5 W @ 24 VDC (typical) Environment Operating Temperature -10 ~ 55 ° C (when mounted vertically) Storage Temperature -40 ~ 70° C Relative Humidity 5 ~ 95% (non-condensing) Ordering Information APAX-5520CE APAX-5002 APAX-5343E PC-based Controller with XScale CPU, WinCE 2-slot Backplane Module Power Supply for APAX Expansion Module