Isolated RS-232/422/ 485 Module Dual-port RS-422/485 Module 4-port RS-232 High-Speed Module PC/104 ❑ PCM-3610 Isolated RS-232/422/ 485 Module ❑ PCM-3612 ❑ PCM-3640/3641 Dual-port RS-422/485 Module 4-port RS-232 High-Speed Module Features Features Features • High speed transmission rate • Long distance communication • Automatic RS-485 data flow control • Automatic RS-485 data flow control • Jumper selectable interrupt level • Jumper selectable interrupt level • Supports Windows 95/98/NT/2000/ ME, Linux (ICOM utility), DOS/ Windows 3.1 • Supports Windows 95/98/NT/2000/ME, Linux (ICOM utility), DOS/Windows 3.1 • Transmission speeds up to 460 Kbps (PCM-3641) • Shared IRQ settings for each of 4 RS232 ports (PCM-3641) • Standard PC ports: COM1, COM2, COM3, COM4 compatible • Supports Windows 95/98/NT/2000/ME, Linux (ICOM utility), DOS/Windows 3.1 Specifications Specifications Specification: • Channel 1: RS-232,422,or 485 • Channel 1 and 2: RS-422, or RS-485 • Channel 2: RS-422, or RS-485 • Baud rate: 50 ~ 115,200 bps • • • • • • • • • Baud rate: 50 ~ 115,200 bps • Character length: 5,6,7,or 8 bits • Character length: 5,6,7, or 8 bits • Parity: Even, odd, or none • Parity: Even, odd, or none • Stop bit: 1, 1.5, or 2 • Stop bit: 1, 1.5, or 2 • Interrupt level: IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15 • Interrupt level: IRQ 3, 4, 5, 6, 7, 9 • I/O connectors: Dual male DB-9 • Power consumption: +5 V @ 400 mA typical ±12 V @ 950 mA max • Isolation: 500 VDC Ordering Information ❑ PCM-3610-A Isolated RS-232/422/485 module 7-32 • I/O connectors: dual male DB-9 • • • Power consumption: +5 V @ 400 mA typical ±12 V @ 950 mA max • • LED: Red LED for TX Green LED for RX • • Bus interface: PC/104 Number of ports: 4 I/O address: 0 x 0200 ~ 0 x 03F8 IRQ: 3, 4, 5, 6, 7, 9, 10, 11, 12, 15 Data bits: 5, 6, 7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd Speed (bps): 50 ~ 460 K (PCM-3641) 50 ~ 115.2 K (PCM-3640) Connectors: Four DB-9 male Data signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND Power requirement: +5 V @ 200 mA (Typical) ; +5 V @ 250 mA (Max.) Operating Temperature: 0 ~ 65° C (refer to IEC-68-1-1, 2) Storage Temperature: -25 ~ 80° C Ordering Information Ordering Information ❑ PCM-3612-A Dual port RS-422/485 module ❑ PCM-3641 4-port RS-232 High-Speed module ❑ PCM-3640 4-port RS-232 module Industrial Communications ❑ PCM-3660 Jumperless Ethernet Module ❑ PCM-3662 ❑ PCM-3680 PC/104-plus Ethernet Module Dual-port Isolated CAN Interface Module Features Features Features • Automatically detects 8-bit or 16-bit • Support IEEE 802.3u Ethernet standard • Support IEEE 802.3x Full Duplex Flow Control • Support 10/100 Base-T Ethernet • Support Wake-On-LAN function • Provide 4 modes LED definition • Operates two separate CAN networks at the same time • High speed transmission up to 1 Mbps • Direct memory mapping enables very fast access to the CAN controllers • C library and examples included • DOS Library, Utility and Win 3.1/NT DeviceNet DLL drivers included • AUI connector supports external MAUs • On-board 32 K byte buffer for mulipackage Specifications Specifications Specifications • I/O address: 200, 220, 240, 260, 280, 2A0, 2C0, 300, 320, 340, 380, 3A0 Hardware • PC-104 form-factor: 64 x 8 mm • Data bus: 32-bit Software Driver support • Windows 95/98/NT/2000 driver • Novell server driver • Windows for workgroups driver • Unixware 7.0 driver • WinCE driver for x86 platform • Novell ODI client driver • Novell ODI driverfor client32 • Linux driver General • Power: +5V @ 250 mA • Temperature: 0° C to 70° C (operating) -15° C to 80° C (storage) • Humidity: 10% to 90% (operating) • Port: 2 • Interrupt level: IRQ 3, 4, 5, 9, 10, 11, 12 or 15 • Boot ROM address: C0000, C8000, D0000, or D8000H • Data bus: 8-bit, 16-bit, or auto-sending • Connector: 16-bit PC/104 stackthrough connector RJ-45 connector for 10Base-T, 16-pin insulation displacement connector for AU1 • Standard: IEEE 802.3 10 Mbps CSMA/CD 10Base-T Transceiver • Power consumption: +5 V @ 400 mA max Ordering Information Ordering Information ❑ PCM-3660-C1 Jumperless ethernet module ❑ PCM-3662A PC/104- plus Ethemnt Module • • • • • • • • • • CAN controller: SIA-1000 CAN transceiver: SIA-1000 Signal aupport: CAN_H, CAN_L Memory segment base address: From C800H to EFOOI IRQ: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15 Isolation voltage: 1000 V DC Power consumption: +5V @ 400 mA typical, 950 mA Connectors: Dual DB-9 male connectors (cable included) Operating temperature: 32° F to 122° F (0 to 50°C) Dimmensions: 3.6" X 3.8" (90mm x 96 mm) Ordering Information ❑ PCM-3680 Dual-port Isolated CAN Interface Module ❑ PCM-3661-A 10Base-2 transceiver module Industrial Communications www.advantech.com 7-33 7 PCM-3610 PC/104 Industrial Communications Jumperless Ethernet Module PC/104-plus Ethernet Module Dual-port Isolated CAN Interface Module