Bulletin 700-SK Solid-State Relays Overview/Product Selection Bulletin 700-SK Table Of Contents • • Product Selection . . . . . . . . 58 Accessories . . . . . . . . . . . . 58 Specifications . . . . . . . . . . . 60 Approximate Dimensions . . . . . . . . . . . . . 62 • • • High Response Speed Models Input Sensor Module to Allow High Voltage 100…240V AC or 12…24V DC Sensor Interface to Low Voltage (Logic) Device Such as a PC Output Module For Typical SSR Applications LED Indicator Input Modules and Output Modules Can Be Used With the 700-HN121 Socket Product Selection Input/Sensor Module Input-to-Output Isolation Method LED Indicator Photocoupler Yes Response Speed Logic Level Supply Voltage Supply Current 4…32V DC 0.1…100 mA 10 Hz High-speed (1 kHz) Rated Input Sensor Voltage Cat. No. Factory-stocked item (Single Pack) 100…240V AC 700-SKICA18 ✔ 12…24V DC 700-SKICZ24 ✔ Output/SSR Module Input-to-Output Isolation Method Phototriac Photocoupler 58 Zero Cross Function LED Indicator Yes No N/A Rated Output (Load) Max. Current and Voltage Range Rated Input Control Voltage 2 A at 100…240V AC Yes 2 A at 5…48V DC 1.5 A at 48…200V DC 5…24V DC Cat. No. Factory-stocked item (Single Pack) 700-SKOZ2Z25 ✔ 700-SKON2Z25 ✔ 700-SKOC2Z25 ✔ 700-SKOC1Z25 ✔ Bulletin 700-SK Solid-State Relays Accessories Description Pcs./Pkg. Cat. No. Factory-stocked Item Screw Terminal Socket — Panel or DIN Rail Mounting Order must be in multiples of ten 10 700-HN121 ✔ DIN Rail Mounting Pack Standard 35 x 7.5 mm DIN Rail, 1 meter long, 10 rails per package. Order must be for 10 rails or multiples of 10. 10 199-DR1 ✔ 10 700-N40 10 700-N41 Cat No. 700-HN121 Cat No. 199-DR1 Pre-printed identification tags — contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank tags. Tags are peel-off with sticky backing for easy placement on relays. Blank identification tags — contains 10 sheets of blank identification tags for customer specialized printing. Each sheet contains 546 blank tags. Tags are peel-off with sticky backing for easy placement on relays. 59 Bulletin 700-SK Solid-State Relays Specifications Input Sensor Module Input Sensor Ratings Rated Input Voltage Cat, No. Operating Voltage Range Input Current Pick-up Voltage Drop-out Voltage 700-SKICZ24 12…24V DC 6.6…32V DC 8 mA max. 6.6V DC max. 3.6V DC min. 700-SKICA18 100…240V AC 60…264V AC 15 mA max. 60V AC max. 20V AC min. Output Logic Ratings Cat. No. 700-SKICZ24 700-SKICA18 Logic Level Supply Voltage Logic Level Supply Current Draw 4…32V DC 0.1…100 mA Characteristics 700-SKICA18 700-SKICZ24 Pick-up time Cat. No. 20 ms max. 0.1 ms max. Drop-out time 20 ms max. 0.1 ms max. Response frequency 10 Hz 1 kHz Output ON voltage drop 1.6 V max. 5 µA max. Leakage current VDRM VCEO (V) 80 (ref. value) 80 (ref. value) Output di/dt (A/uS) — — Output dv/dt (V/uS) — — Output I2t (A2S) — — Output Tj (°C) Max. 150 150 Insulation resistance 100 MΩ min. between input and output Dielectric strength 4,000V AC, 50/60 Hz for 1 min. between input and output Vibration resistance (max.) Shock resistance 10…55 Hz, 1.5 mm double amplitude (10 G) 1,000 m/s2 (max.) Ambient temperature Operating Storage (100 G) –30…80°C (–22…176°F) with no icing or condensation –30…100°C (–22…212°F) with no icing or condensation UL 508 CSA C22.2 CE, TÜV Standards Ambient humidity Operating 45…85% (No condensation) Weight Approx. 18 g Output SSR Module Control/Input Ratings Cat. No. Rated Control Voltage Operating Control Voltage Range Impedance➊ 4…32V DC 15 mA max. at 25°C (77°F) 700-SKOZ2Z25 700-SKON2Z25 5…24V DC 700-SKOC2Z25 Pick-up Voltage Drop-out Voltage 4V DC max. 1V DC min. 8 mA max. 700-SKOC1Z25 Load/Output Ratings Continuous Load Current (Resistive) Max. Inrush Current➋ Cat. No. Rated Load Voltage Load Voltage Range — — — Min. Max.➌ — 100…240V AC 75…264V AC 0.05 A 2A 30 A (@50/60 Hz, 1 cycle) 700-SKOZ2Z25 700-SKON2Z25 700-SKOC2Z25 5…48V DC 4…60V DC 0.01 A 2A 8 A (10 ms) 700-SKOC1Z25 48…200V DC 40…200V DC 0.01 A 1.5 A 8 A (10 ms) ➊ With a constant current input system. SSR impedance varies with a change in input voltage. ➋ If the SSR operation is continuous ON/OFF, this value should be reduced by 50%. Refer to the “Inrush Current Resistivity” graphs on page 61 for more details. ➌ Refer to "Load Current Versus Ambient Temperature Characteristics" graphs on page 61 for additional details. 60 Bulletin 700-SK Solid-State Relays Specifications, Continued Output Module, Continued Characteristics 700-SKOZ2Z25 Cat. No. Load Switching Method/Device 700-SKON2Z25 700-SKOC2Z25 700-SKOC1Z25 Triac Transistor Pick-up time 1/2 of load power source cycle + 1 ms max. 1 ms max. Drop-out time 1/2 of load power source cycle + 1 ms max. 2 ms max. 20 Hz 100 kHz Response frequency Output ON voltage drop 1.6 V max. Leakage current 2.5V max. 1.5 mA max. VDRM VCEO (V) 1 mA max. 600 (ref.value) 600 (ref.value) 80 (ref.value) Output di/dt (A/uS) 30 30 — — Output dv/dt (V/uS) 300 300 — — Output I2t (A2S) 10.4 10.4 — — Output Tj (°C) Max. 125 125 150 150 Insulation resistance 400 (ref.value) 100 MΩ min. between input and output Dielectric strength 4,000V AC, 50/60 Hz for 1 min. between input and output Vibration resistance (max.) 10…55 Hz, 1.5 mm double amplitude (10 G) 1,000 m/s2 (100 G) Shock resistance (max.) Operating Storage Ambient temperature –30…80°C (–22…176°F) with no icing or condensation –30…100°C (–22…212°F) with no icing or condensation UL 508 CSA C22.2, CE TÜV Standards Ambient humidity Operating 45…85% (no condensation) Weight Approx. 18 g Load Current vs. Ambient Temperature Characteristics Maximum Load Current (A) Maximum Load Current (A) For 2 A Versions 2 1.5 1 0.5 2 1.5 1 0.5 ˚c ˚c Inrush Current Resistivity➊ 700-SKOZ / SKON 700-SE05 700-SKOC2 700-SKOZ /SKOC1 2000 ➊ Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability once every 2…5 seconds). Keep the inrush current to half the rated value if it occurs repetitively. Exceeding the non-repetitive inrush current will damage the SSR. 61 Bulletin 700-SK Solid-State Relays Approximate Dimensions All units are in millimeters unless otherwise indicated. Dimensions are not to be used for manufacturing purposes. Note: The input module (700-SKI) and output module (700-SKO) are compatible with the 700-HN121 socket. 1 5.2 Terminal Arrangement/ Internal Connections (Bottom View) 3 0.5 29 max. 17.4 4.75 1 13 max. 28 max. 5 (+) 4 9.6 (–) 4.7 Input 0.5 4.75 4 10 4 Load 5 7.5 3 1 5 (–) (+) 2 20 Bulletin 700-SK Application Considerations of Bulletin 700-SK Connection For DC load switching, Bulletin 700-SK SSR will operate properly if the load is connected to either the positive or negative SSR load terminal. The load can be connected to either positive or negative output terminals of the SSR. Protective Element (to extend SSR life) Since the SSR does not incorporate a surge absorption component, be sure to connect a surge absorption component when using the SSR to control an inductive load. For additional details applying solid-state relays, refer to pub. number 700-AT001A-EN-E, "Solid-State Relay Application Guide." Document available at www.theautomationbookstore.com. 62