RoHS PCHC60 Power Chip High Current Inductors 0.500 MAX. (12.70) 0.300 (7.62) 0.640 (16.26) MAX. Dimensions: Inches (mm) 0.315 MAX. (8.00) 0.110 (2.79) 0.880 MAX. (22.35) 0.340 (8.64) 0.565 (14.35) Features • Designed for high current, low voltage 0.125 (3.18) * Notice of marking change see “Marking” below. Allied Part Number Inductance (µh) Tolerance (%) SRF Reference (MHz) DCR Max. (mΩ) Isat (A) Irms (A) PCHC60-R78M-RC .78 20 156 2.6 30 15 PCHC60-1R5M-RC 1.5 20 100 4.0 25 15 PCHC60-2R2M-RC 2.2 20 75 6.1 20 12 PCHC60-3R3M-RC 3.3 20 60 8.6 17 10 PCHC60-3R9M-RC 3.9 20 55 10 15 9.0 PCHC60-4R7M-RC 4.7 20 40 14 13 8.4 PCHC60-6R0M-RC 6.0 20 35 17 12 7.5 PCHC60-7R8M-RC 7.8 20 35 18 11 7.5 PCHC60-100M-RC 10 20 28 26 10 6.0 PCHC60-150M-RC 15 20 20 32 8 4.4 DC to DC converter applications • Current ratings up to 15Arms and saturation current up to 30A • Extremely low DCR • Provided in tape and reel packaging for pick and place assembly Electrical Inductance Range: .78µh to 15µh. Tolerance: ± 20% over the entire inductance range. Test Frequency: Inductance measured at 100KHz, 0.1 Vrms. After soldering, push Operating Temp. Range: i-40° to +85°C.ll Inductance Drop: 10% typically at the rated Isat.0 to 2000) x 10 -6°C. Temperature Rise: ∆T=40ºC rise typical at Irms. Physical Marking: Notice: We will be changing our marking system to the 4 character EIA code for inductance and tolerance. For example: “101K” for 100µh 10%. Packaging: 250 pieces per 13 inch reel. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 7/23/09 www.alliedcomponents.com