RoHS Power Chip Inductors Dimensions: Inches (mm) 0.510 Max (12.95) 0.300 (7.62) 0.118 Max (3.00) 1st 0.370 (9.40) Max 2nd 0.100 (2.54) 3rd 0.100 (2.54) Inductance (µh) PCI30-100M-RC 10 Tolerance (%) 20 0.110 (2.79) 0.118 (3.00) * Notice of marking change see “Marking” below. Allied Part Number PCI30 SRF (MHz) TYP DCR Max. (Ω) Isat (A) Irms (A) 35 0.09 2.4 2.0 0.290 (7.37) Features • Low Profile • Designed with high heat resistant materials for reflow operation PCI30-150M-RC 15 20 33 0.12 2.0 1.5 • Wrap around terminals for excellent solder quality and inspection PCI30-220M-RC 22 20 25 0.19 1.6 1.3 • Flat top for pick and place assembly • Non-standard values available 0.25 1.4 1.1 14 0.32 1.0 0.8 20 12 0.55 0.9 0.7 100 20 10 0.70 0.7 0.6 PCI30-151M-RC 150 20 8 1.00 0.6 0.5 PCI30-221M-RC 220 20 6 1.60 0.5 0.4 PCI30-331M-RC 330 20 5 2.20 0.4 0.3 PCI30-471M-RC 470 20 4 3.30 0.3 0.2 PCI30-681M-RC 680 20 3 4.40 0.2 0.1 PCI30-102M-RC 1000 20 2.5 7.00 0.1 0.05 PCI30-330M-RC 33 PCI30-470M-RC 20 19 47 20 PCI30-680M-RC 68 PCI30-101M-RC Electrical Inductance Range: 10µh to 1000µh. Tolerance: ± 20% over the entire inductance range. Test Frequency: Inductance measured at 100KHz, 0.1 Vrms. After soldering, push Operating Temp. Range: i-40° to +85°C. ll Inductance Drop: 20% typically at the rated Isat.0 to 2000) x 10 -6°C. Temperature rise: ∆T=30ºC typical at Irms. Physical Marking: Notice: We will be changing our marking system to the 4 character EIA code for inductance and tolerance. For example: “101K” for 100µh 10%. Packaging: 1000 pieces per 13 inch reel. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 7/23/09 www.alliedcomponents.com