RoHS PCSLF1255 Power Chip Shielded Inductors Dimensions: Allied Part Number Features • • • • Shielded Power Inductor Suitable for high current applications Low Profile Low Power loss and High current Inches (mm) Inductance (uH) Tolerance (%) Test Freq. KHz,0.5v DCR (Ω) ±20% IDC (A) Itemp (A) Max. PCSLF1255-6R0T-RC 6 30 1 .0164 3.6 4.9 PCSLF1255-100T-RC 10 30 1 .0215 3.4 4.3 PCSLF1255-150T-RC 15 30 1 .0259 2.8 3.9 PCSLF1255-220T-RC 22 30 1 .0338 2.3 3.4 PCSLF1255-330T-RC 33 30 1 .0415 1.9 3.1 PCSLF1255-470T-RC 47 30 1 .0618 1.6 2.5 PCSLF1255-680T-RC 68 30 1 .0832 1.3 2.2 PCSLF1255-101T-RC 100 30 1 0.117 1.1 1.8 PCSLF1255-151T-RC 150 30 1 0.35 .88 1.4 PCSLF1255-221T-RC 220 30 1 0.47 .72 1.2 PCSLF1255-331T-RC 330 30 1 0.58 .59 1.0 PCSLF1255-471T-RC 470 30 1 0.68 .49 .88 PCSLF1255-681T-RC 680 30 1 1.03 .43 .73 Physical PCSLF1255-102T-RC 1000 30 1 1.60 .34 .60 Packaging: 500 pieces per 13 inch reel. PCSLF1255-152T-RC 1500 30 1 2.80 .29 .48 Electrical Inductance Range: 6µH to 1500µH Tolerance: 30% over entire range, tighter tolerances available Operating Temp: -40ºC ~ +85ºC IDC: Current at which inductance drops by 10% of intial value Itemp current: Value obtained when current flows and the temperature has risen by 30ºC Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment (L): HP 4192A (RDC): Chen Hwa 502BC (IDC): HP4284A + HP42841A / Chen Hwa 1061 + 301A Marking: EIA Inductance Code All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/30/08 15 www.alliedcomponents.com