RoHS Power Chip Shielded Inductors PCSLR2D18 Dimensions: Inches (mm) Test Freq. KHz,1v DCR (Ω) Max Rated Current (A) Irms (A) Max. 30 100 0.041 0.85 2.30 3.3 30 100 0.054 0.75 2.10 PCSLR2D18-4R7T-RC 4.7 30 100 0.078 0.63 1.65 PCSLR2D18-6R8T-RC 6.8 30 100 0.106 0.52 1.32 PCSLR2D18-100T-RC 10 30 100 0.180 0.43 1.00 PCSLR2D18-150T-RC 15 30 100 0.220 0.35 0.80 Allied Part Number Inductance (µh) PCSLR2D18-2R2T-RC 2.2 PCSLR2D18-3R3T-RC Tolerance (%) Features • Shielded SMD Power Inductor • Low DC Resistance • Ideal for use in DC-DC converter applications Electrical Inductance Range: 2.2µH to 47µH Tolerance: 30% over entire range, tighter tolerances available Operating Temp: -30ºC ~ +100ºC IDC: Current at which inductance drops by 10% of intial value Itemp current: Value obtained when current flows and the temperature has risen to 40ºC Resistance to Soldering Heat PCSLR2D18-220T-RC 22 30 100 0.320 0.30 0.68 PCSLR2D18-330T-RC 33 30 100 0.460 0.24 0.56 PCSLR2D18-390T-RC 39 30 100 0.600 0.22 Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment (L): PM3260A / HP4284A / HP4285A (RDC): Chen Hwa 502BC PCSLR2D18-470T-RC 47 30 100 0.660 0.20 0.48 All specifications subject to change without notice. (IDC): HP4284 + HP42841A / Chen Hwa 1061 + 301A Physical Packaging: 1000 pieces per 7 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 12/19/08 www.alliedcomponents.com