RoHS Ultra Current Beads Dimensions: UCB10 Inches (mm) Allied Part Number Impedance (Ω) Tolerance (%) Test Freq. MHz, 200mV DCR Max. (Ω) Rated Current (mA)Max UCB10-110T-RC 11 30 100 .012 6000 UCB10-150T-RC 15 30 100 .012 6000 UCB10-170T-RC 17 30 100 .012 6000 UCB10-190T-RC 19 30 100 .012 6000 UCB10-220T-RC 22 30 100 .012 6000 UCB10-260T-RC 26 30 100 0.12 6000 UCB10-300T-RC 30 30 100 0.12 6000 UCB10-310T-RC 31 30 100 0.12 6000 UCB10-320T-RC 32 30 100 0.12 6000 UCB10-330T-RC 33 30 100 0.12 6000 UCB10-400T-RC 40 30 100 0.15 6000 UCB10-420T-RC 42 30 100 0.15 6000 Features • • • • Ultra High Current Standard 0805 size Low Profile under 1.00mm Triple plated RoHS Compliant Terminations • Excellent Solderability Electrical UCB10-500T-RC 50 30 100 0.15 6000 UCB10-600T-RC 60 30 100 0.02 4500 UCB10-700T-RC 70 30 100 0.02 4500 UCB10-800T-RC 80 30 100 0.02 4500 Impedance range: 11Ω to 80Ω Tolerance: 30% over entire range available in tighter tolerances Operating Temp: -55ºC ~ +125ºC Rated Current: The current at which the temperature rise shall be no more that 30ºC Also, the rated current is de-rated above 85ºC to approximately 1000mA at 125ºC Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free) Solder Temp: 260ºC peak for 10 sec. ± 1 sec. Test Equipment (Z): HP4291A RF Impedance/Material Analyzer (RDC): Chen Hwa 502BC/HP4338B Physical Packaging: 4000 pieces per 7 inch reel Marking: None All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1512/29/08 www.alliedcomponents.com