revision for dwg # 1PB-P2AMLS4 6 5 rev ch.no. - - date description original design 11/5/2007 revised by Philipp E. 1 42 mm [1.7 in] max. 4 mm [.16 in] [1.2 in] n30 mm 2 66 mm [2.6 in] 4 90 mm [3.5 in] 30 mm [1.2 in] 3 ITEM 1* 2* 3* 4* 5 Up tp six switch contacts can be installed. 6** Switch Contacts * = Push button is supplied with rubber gasket, mounting nut and mounting bracket (ITEM 1,2,3 and 4) ** = Switch Contacts must be ordered separatly unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 DESCRIPTION Mushroom, 30 mm Push-Turn Rubber Gasket Mounting Nut Mounting Bracket Panel and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. titel CAT. NO. P2AMLS4 2PRG1 P2MN P2BRK S1 S2 S3 S4 COLOR MIN. QTY. MAX. QTY. Red 1 1 Black 1 1 Black 1 1 Black 1 1 Green 1 6 Red 1 6 Green/Gray 1 6 Red/Gray 1 6 22 mm Thermoplastic Enclosure Mushroom Push-Turn Operator P2AMLS4 drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/5/2007 drawing no.: rev.: 11/5/2007 1PB-P2AMLS4 11/5/2007 scale: - - sheet: 1 of: 1