AOSMD AOZ8005CI

AOS Semiconductor
Product Reliability Report
AOZ8005CI, rev 1
Plastic Encapsulated Device
ALPHA & OMEGA Semiconductor, Inc
495 Mercury Drive
Sunnyvale, CA 94085
U.S.
Tel: (408) 830-9742
www.aosmd.com
Mar 26, 2007
1
This AOS product reliability report summarizes the qualification result for AOZ8005CI.
Review of the electrical test results confirm that AOZ8005CI pass AOS quality and reliability
requirements for product release. The continuous qualification testing and reliability monitoring
program ensure that all outgoing products will continue to meet AOS quality and reliability standards.
Table of Contents:
I.
II.
III.
IV.
V.
Product Description
Package and Die information
Qualification Test Requirements
Qualification Tests Result
Quality Assurance Information
I. Product Description:
The AOZ8005CI is a transient voltage suppressor array designed to protect high speed data lines from ESD and
lightning. The product comes in RoHS compliant, SOT-23 package and is rated over a -40°C to +85°C ambient
temperature range.
.
Absolute Maximum Ratings
Parameter
VP-VN
6V
Peak Pulse Current (Ipp), tp=8/20uS
5A
Peak Power Dissipation (8x20mS@ 25°C)
SOT-23
TBD
Storage Temperature (TS)
ESD Rating per IEC61000-4-2, contact (1)
ESD Rating per IEC61000-4-2, air (2)
ESD Rating per Human Body Model (2)
Junction Temperature (Tj)
-65°C to +150°C
±12kV
±15kV
±15kV
-40°C to +125°C
Notes:
(1) IEC-61000-4-2 discharge with CDischarge=150pF, RDischarge=330Ω
(2) Human Body Discharge per MIL-STD-883, Method 3015 CDischarge=100pF, RDischarge=1.5kΩ
II. Package and Die Information:
Product ID
Process
Package Type
Die
L/F material
Die attach material
Die bond wire
Mold Material
Plating Material
AOZ8005CI
UMC 0.5um 5/18V 2P3M process
SOT-23
UE003A3 (size: 716 x 616 um)
Copper A194FH
84-3J epoxy
Au, 1mil
MP8005CIH4
Pure Tin
2
III. Qualification Tests Requirments
•
•
2 lots of AOZ8005CI up to 168 hrs of B/I for New Product release.
2 lots of package qual testing (PCT, 250 cycles TC) for SOT-23 for package release to manufacturing.
IV. Qualification Tests Result
Test Item
Test Condition
Sample Size
Result
PreConditioning
Per JESD 22-A113
0
85 C /85%RH, 3 cyc
0
[email protected] C
2 lot (82 /lot)
pass
Pkg. Qual by extension using AOZ8000C.
Lot 1 (wafer lot# F162T.51-20, marking:
A02), 82 units, passed pre-conditioning.
Lot 2 (wafer lot# F162T.51-20, marking:
A03), 82 units, passed pre-conditioning.
HTOL
(pkg qual
burn-in )
Per JESD 22-A108_B
Vdd=6V
Temp = 125 0C
2 lot (80 /lot)
pass
Pkg. Qual by extension using AOZ8000C.
Lot 1 (wafer lot# F162T.51-20, marking:
A02), 80 units, passed 500 hrs .
Lot 2 (wafer lot# F162T.51-20, marking:
A03), 80 units, passed 500 hrs .
HTOL
(new UI_EPI
process)
Per JESD 22-A108_B
Vdd=6V
Temp = 125 0C
2 lot (80 /lot)
pass
Lot 1 (wafer lot# FN2MT.01-12, marking:
AC001), 80 units, passed 500 hrs .
Lot 2 (wafer lot# FN646.03-4 marking:
AC003), 80 units, passed 168 hrs .
HAST
'130 +/- 2 0C, 85%RH, 33.3 2 lot (60 /lot)
psi, at VCC min power
dissapation
pass
Pkg. Qual by extension using AOZ8000C.
Lot 1 (wafer lot# F162T.51-20, marking:
A02), 60 units, passed HAST 100 hrs .
Lot 2 (wafer lot# F162T.51-20, marking:
A03), 60 units, passed HAST 100 hrs .
Temperature
Cycle
'-65 0C to +150 0C, air to
air (2cyc/hr)
2 lot (82 /lot)
pass
Pkg. Qual by extension using AOZ8000C.
Lot 1 (wafer lot# F162T.51-20, marking:
A02), 82 units, passed TC 500 cycles.
Lot 2 (wafer lot# F162T.51-20, marking:
A03), 82 units, passed TC 500 cycles.
Pressure Pot
121C, 15+/-1 PSIG,
RH= 100%
2 lot (82 /lot)
pass
ESD Rating
Per IEC-61000-4-2,
contact
3 units
pass
Pkg. Qual by extension using AOZ8000C.
Lot 1 (wafer lot# F162T.51-20, marking:
A02), 82 units, passed PCT 96 hrs.
Lot 2 (wafer lot# F162T.51-20, marking:
A03), 82 units, passed PCT 96 hrs.
Lot 1 (wafer lot# FN646.03-4 , marking:
AC003 ), 3 units passed ±12kV
ESD Rating
Per IEC-61000-4-2, air
3 units
pass
Lot 1 (wafer lot# FN646.03-4 , marking:
AC003 ), 3 units passed ±15kV
Latch-up
Per JESD78A
3 units
pass
Lot 1 (wafer lot# FN646.03-4 , marking:
AC003 ), 3 units passed Latch-up.
Comment
The qualification test results confirm that AOZ8005CI pass AOS quality and reliability
requirements for product release.
3
V. Quality Assurance Information
Acceptable Quality Level for outgoing inspection: 0.1% for electrical and visual. Guaranteed
Outgoing Defect Rate: < 50 ppm
Quality Sample Plan: conform to Mil-Std -105D
4