AOSMD AOZ8015DIL

AOZ8015
6-Line EMI Filter with Integrated ESD Protection
General Description
Features
The AOZ8015 is a 6-line device integrating EMI filtering
with ESD protection for each line. It is designed to
suppress unwanted EMI/RFI signals and provide electrostatic discharge (ESD) protection in portable electronic
equipment. This state-of-the-art device utilizes AOS
leading edge Trench Vertical Structure [TVS]2 ™
technology for superior clamping performance and filter
attenuation over the full operating display range. The
AOZ8015 has been optimized for protection of color LCD
displays and CCD camera lines in cellular phones and
other portable consumer electronic devices.
●
●
●
●
●
The AOZ8015 consists of six identical circuits
comprised of TVS diodes for ESD protection, and a
resistor–capacitor network for EMI/RFI filtering.
A series resistor value of 100Ω and a capacitance
value of 20pF are used to achieve -30dB minimum
attenuation from 800MHz to 3.0GHz. The TVS diodes
provide effective suppression of ESD voltages in excess
of ±17kV (air discharge) and ±17kV (contact discharge).
This exceeds IEC 61000-4-2, level 4 ESD immunity test.
The AOZ8015 comes in an RoHS compliant, 1.35mm x
3.0mm DFN package and is rated over a -40°C to +85°C
ambient temperature range.
6 lines for EMI filtering and ESD protection:
– Exceeds IEC 61000-4-2, level 4 (ESD) immunity test
– ±17kV (air discharge) and ±17kV (contact discharge)
Trench Vertical Structure [TVS]2 ™ based technology
used to achieve excellent ESD clamping & filter
performance over the full operating display range
Filter performance: -30db attenuation from 800MHz to
3.0GHz
Low operating voltage: 5.0V
Capacitance stability over wide range of voltages and
temperatures
●
DFN package 1.35mm x 3.0mm
●
Pb-Free device
Greeen product
●
Applications
●
●
●
EMI filtering and ESD protection for data lines
LCD displays, camera interface, I/O interface
Portable handheld devices, cell phones, PDA phones
Electrical Schematic (each channel)
100Ω
CHn
(n = 1–6)
20pF
20pF
GND
Figure 1.
Rev. 1.5 May 2008
www.aosmd.com
Page 1 of 7
AOZ8015
Ordering Information
Part Number
Ambient Temperature Range
Package
Environmental
AOZ8015DIL
-40°C to +85°C
DFN-12
RoHS Compliant
Green Product
• All AOS products are offered in packages with Pb-free plating and compliant to RoHS standards.
• Parts marked as Green Products (with “L” suffix) use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information.
Pin Configuration
1
11
2
10
9
8
Exposed Pad (GND)
12
3
4
5
1
12
2
11
3
10
4
9
5
8
6
7
6
7
DFN-12
(Bottom View)
Top View
Pin Description
Rev. 1.5 May 2008
Pin Number
Pin Name
Pin Function
1,12
CH 1
Channel 1 Connections
2, 11
CH 2
Channel 2 Connections
3, 10
CH 3
Channel 3 Connections
4, 9
CH 4
Channel 4 Connections
5, 8
CH 5
Channel 5 Connections
6, 7
CH 6
Channel 6 Connections
Exposed Pad
GND
Common Ground Connection
www.aosmd.com
Page 2 of 7
AOZ8015
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage the device.
Parameter
Rating
Storage Temperature (TS)
-65°C to +150°C
ESD Rating per IEC61000-4-2,
contact(1)
ESD Rating per IEC61000-4-2,
air(1)
±17kV
±17kV
ESD Rating per Human Body Model(2)
±30kV
Notes:
1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω.
2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ.
Electrical Characteristics
TA = 25°C unless otherwise specified.
Symbol
VRWM
VBR
IR
Parameter
Reverse Working Voltage
Conditions
1mA(4)
Reverse Breakdown Voltage
IT =
6
Reverse Leakage Current
VRWM = 3.3V
Signal Clamp Voltage
ILOAD = 12A, positive
ILOAD = 12A, negative clamp(5)(8)
RCH
Total Series Resistance
IR = 20mA
fC
Typ.
Max.
Units
5.0
V
8
V
0.1
µA
11
-10
V
7
clamp(5)(8)
VCL
CCH
Min.
(3)(8)
Ground(6)(7)(8)
90
100
110
Ω
18
20
22
pF
Channel Capacitance
Input to
Cut-off Frequency
Measured with 50Ω source and 50Ω load
termination
100
MHz
Attenuation from 800MHz
to 3.0GHz
Measured with 50Ω source and 50Ω load
termination
-30
dB
Notes:
3. The working peak reverse voltage, VRWM, should be equal to or greater than the DC or continuous peak operating voltage level.
4. VBR is measured at the pulse test current IT.
5. Measurements performed using a 100ns Transmission Line Pulse (TLP) system.
6. Total capacitance is equal to 2 x CCH.
7. Measured at 25°C, VR = 2.5V, f = 1.0MHz.
8. Guaranteed by design.
Rev. 1.5 May 2008
www.aosmd.com
Page 3 of 7
AOZ8015
Typical Performance Characteristics
Typical Line Capacitance vs.
Reverse Bias Voltage
Insertion Loss Characteristics
0
23
@ 0V Bias
@ 5V Bias
-5
22
-10
Capacitance (pF)
-15
S21 (db)
-20
-25
-30
-35
-40
21
20
19
18
-45
-50
1
10
100
1000
10000
1
2
Frequency (MHz)
3
4
5
Reverse Biased Voltage (V)
Analog Crosstalk
Clamping Voltage vs. Peak Pulse Current
0
12
11
Forward Voltage (V)
-20
S21 (db)
-40
-60
10
9
8
7
-80
6
-100
5
1
10
100
1000
0
10000
2
4
Frequency (MHz)
Clamping Voltage vs. Current
6
Current (A)
8
10
12
Typical Resistance vs. Temperature
12
110
105
8
Resistance (Ω)
Clamping Voltage (V)
10
6
4
100
95
2
0
0
2
4
6
8
10
12
90
-45
Current (A)
Rev. 1.5 May 2008
-25
-5
5
25
45
65
85
Temperature (°C)
www.aosmd.com
Page 4 of 7
AOZ8015
Package Dimensions, DFN 1.35 x 3.0, 12L
0.15 C
D
D1
F
E
CL B
Pin 1
Marking
L
0.15 C
12
7
8
9
10
11
12
6
5
4
3
2
1
E1
1
e
A
CL
Pin 1 ID
(C0.2x45°)
b
BOTTOM VIEW
TOP VIEW
0.10 C
A
0.08 C
SIDE VIEW
A1 A3 C
RECOMMENDED LAND PATTERN
2.20
0.35
0.20
Dimensions in millimeters
Symbols
A
A1
A3
b
Min.
0.45
0.00
Nom. Max.
0.50
0.55
0.02
0.05
0.152 REF
0.20
0.25
0.30
D
D1
E
E1
e
2.90
2.10
1.25
0.20
3.00
2.20
1.35
0.30
0.50 BSC
L
F
0.20
0.30
0.40
0.20 REF
3.10
2.30
1.45
0.40
Dimensions in inches
Symbols
A
A1
A3
b
Min.
0.018
0.000
Nom. Max.
0.020 0.022
0.001 0.002
0.006 REF
0.008 0.010 0.012
D
D1
E
E1
e
0.114
0.083
0.049
0.008
0.118 0.122
0.087 0.091
0.053 0.057
0.012 0.016
0.020 BSC
L
F
0.008
0.012 0.016
0.008 REF
1.10
0.30
0.20
0.50
0.25
UNIT: mm
Notes:
1. All dimensions are in millimeters. Angles is degree.
2. Coplanarity applies to the exposed pad as well as the terminals. Coplanarity shall not exceed 0.08mm.
3. Warpage shall not exceed 0.10mm.
4. Package length/package width are not considered as special characteristic.
5. Refer JEDEC MO-229.
6. Marking is for package orientation reference only.
Rev. 1.5 May 2008
www.aosmd.com
Page 5 of 7
AOZ8015
Tape and Reel Dimensions, DFN 1.35 x 3.0
Carrier Tape
P2
P1
A-A
A
E1
D1
D0
K0
R0.1 Typ.
E2
E
B0
P1
T
A0
A
Feeding Direction
Unit: mm
Package
DFN
3x1.35
A0
1.60
±0.10
B0
K0
D0
D1
E
3.25
0.70 1.55
1.00
12.00
±0.10 ±0.10 ±0.05 +0.25/-0 ±0.30
E1
1.75
±0.10
Reel
E2
5.50
±0.05
P0
4.00
±0.10
P1
4.00
±0.10
P2
2.00
±0.10
T
0.25
±0.05
W1
S
G
N
M
K
V
R
H
W
Tape Size Reel Size
M
N
12mm
ø330
ø330.00 ø97.00
±0.50
±0.10
W
13.00
+0.30
W1
H
K
17.40
ø13.50
10.60
±1.00 +0.50/-0.20
S
2.00
±0.50
G
—
R
—
V
—
Leader / Trailer
& Orientation
Trailer Tape
300mm min. or
75 empty pockets
Rev. 1.5 May 2008
Components Tape
Orientation in Pocket
www.aosmd.com
Leader Tape
500mm min. or
125 empty pockets
Page 6 of 7
AOZ8015
Part Marking
AOZ8015DIL
(1.35 x 3.0 DFN)
AAWLT
Assembly Lot Code
Part Number Code
Underscore Denotes Green Product
Week and Year Code
This data sheet contains preliminary data; supplementary data may be published at a later date.
Alpha & Omega Semiconductor reserves the right to make changes at any time without notice.
LIFE SUPPORT POLICY
ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of
the user.
Rev. 1.5 May 2008
2. A critical component in any component of a life
support, device, or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
www.aosmd.com
Page 7 of 7