5-Pin PLCC Motorola MC68HC11E9-to-56-Pin SDIP Adapter FEATURES •Allows placing an PLCC package on a board laid out for a shrink DIP. GENERAL SPECIFICATIONS •BOARD MATERIAL: 0.062 [1.58] thick FR-4 with 1-oz. Cu traces, both sides •PADS: HASL •PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •PIN PLATING: Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •OPERATING TEMPERATURE: 221°F [105°C] •FEMALE SOCKET: AMP or equivalent standard single beam PLCC socket MOUNTING CONSIDERATIONS • Solder process like any other surface mount device CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION 1109252-P PLCC SDIP 1 2 Optional Panelized Form PLCC SDIP 1 -- 29 2 27 30 3 3 28 31 4 4 29 32 ALL DIMENSIONS: INCHES [MILLIMETERS] 5 5 30 33 6 6 31 34 ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED 7 7 32 35 8 8 33 36 9 9 34 37 10 10 35 38 11 11 36 39 12 12 37 40 13 13 38 41 14 14 39 42 15 15 40 43 16 16 41 44 17 17 42 45 18 18 43 46 19 19 44 47 20 20 45 48 -- 21 46 49 21 22 47 50 22 23 48 51 23 24 49 52 24 25 50 53 25 26 51 54 26 27 52 55 -- 28 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS 56 Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18052 Rev. AA