PM500CE SERIES Single, dual and triple output • • • • • • • • [ 2 YEAR WARRANTY ] SPECIFICATION Encapsulated package 1 to 10.5W units 230VAC input (115VAC version, see PM500) PCB mounting Short circuit protection EN55022, EN55011 conducted emissions level B EN61000-4-2, -3, -4, -5, -6 immunity compliant Meets EN60950 The PM500CE series is an encapsulated, board mountable linear AC/DC power module with the CE mark to demonstrate compliance with the Low Voltage Directive for European applications. The series has single, dual and triple output models with industry standard output configurations operating from an input voltage of 230VAC making the PM500CE series suitable for a wide range of low power PCB applications. The PM500CE series includes 1W to 10.5W modules. Each module has short circuit protection and the 5V outputs also have overvoltage protection. Conservative design and rating of these modules results in reliable operation and long life. The PM500CE design is a low emissions design with tightly regulated outputs making the series especially suitable for test, measurement and instrumentation equipment. All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS OUTPUT SPECIFICATIONS Voltage accuracy ±1.0% max. Voltage adjustability Yes Line regulation See table Load regulation See table Temperature coefficient Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity EN55022 EN55022 EN61000-4-2, EN61000-4-2, EN61000-4-5, EN61000-4-4, EN61000-4-3, EN61000-4-6, level level level level level level 3 4 3 3 3 3 Perf. Perf. Perf. Perf. Perf. Perf. Level B Level B criteria 1 criteria 1 criteria 1 criteria 1 criteria 1 criteria 1 ±0.02%/°C GENERAL SPECIFICATIONS Overvoltage protection (See Note 4) 5V outputs only 6.2V typical Output power limit Typical 130% to 200% FL Isolation voltage Short circuit protection Switch off/on 100% to 200% FL Isolation capacitance Efficiency INPUT SPECIFICATIONS Input voltage range Input frequency range Safety ground leakage current 40% typical 3000VAC 50pF Approvals and standards (See Note 5) Meets EN60950 Case material UL94V-0 Non-conductive black plastic Weight Case B1 Case B2 Case B3 340g (12oz) 408g (14.4oz) 635g (22.4oz) 230VAC ±10% (See Note 2) 47Hz to 400Hz <3.5mA @ 50Hz MTBF (See Note 3) 710,000 hours ENVIRONMENTAL SPECIFICATIONS PAGE 88 Thermal performance Operating amb. –25°C to +71°C Non-operating amb. –25°C to +85°C Derating, 50°C to 71°C 2.5%/°C Cooling Free-air convection cooled Relative Humidity Non-condensing 20% to 95% RH ENCAPSULATED LINEAR AC/DC POWER SUPPLIES | 1-10.5W AC 1 to 10.5 Watt AC/DC encapsulated modules OUTPUT VOLTAGE OUTPUT CURRENT OVP (4) LINE REGULATION LOAD RIPPLE AND NOISE CASE AVAILABLE MODELS SINGLE OUTPUT 5VDC 500mA Yes ±0.02% ±0.04% 1mV rms B2 PM534CE 5VDC 1000mA Yes ±0.02% ±0.04% 1mV rms B2 PM542CE 5VDC 2000mA Yes ±0.02% ±0.05% 1mV rms B3 PM545CE ±12VDC ±240mA No ±0.02% ±0.02% 0.5mV rms B2 PM537CE ±12VDC ±400mA No ±0.02% ±0.02% 0.5mV rms B3 PM597CE ±15VDC ±100mA No ±0.02% ±0.02% 0.5mV rms B2 PM505CE ±15VDC ±200mA No ±0.02% ±0.02% 0.5mV rms B2 PM565CE ±15VDC ±350mA No ±0.02% ±0.02% 1mV rms B3 PM501CE DUAL OUTPUT TRIPLE OUTPUT (1) 5V/±12VDC 500/±120mA Yes ±0.02% ±.05%/±.02% 0.5mV rms B2 PM591CE 5V/±12VDC 1000/±150mA Yes ±0.02% ±.01%/±.02% 1.0/0.5mV rms B3 PM592CE 5V/±15VDC 500/±100mA Yes ±0.05% ±.10%/±.05% 0.5mV rms B2 PM590CE 5V/±15VDC 1000/±150mA Yes ±0.02% ±.01%/±.02% 1.0/0.5mV rms B3 PM593CE 3 Notes SIDE VIEW CASE B CASE B CASE B SINGLE OUTPUT MODELS DUAL OUTPUT MODELS TRIPLE OUTPUT MODELS STANDARD PINOUT 1.60 (40.6) AC AC 2.20 (55.9) 0.60 (15.2) + 0.50 (12.7) 0.50 (12.7) 0.60 (15.2) 1.60 (40.6) 3.50 (88.9) INSERTS 4.40 THREAD 0.125 (3.2) DEEP 1.60 (40.6) AC 1.62 (41.1) 1.25 (31.8) 0.88 (22.4) 0.15 (3.8) 1.60 (40.6) 3.50 (88.9) INSERTS 4.40 THREAD 0.125 (3.2) DEEP + 5V OUT COM - OUT - OUT 0.15 (3.8) - 0.15 (3.8) 2.50 (63.5) COM 5V 0.60 (15.2) 0.60 (15.2) 0.50 (12.7) 2.50 (63.5) + NC 0.50 (12.7) 0.60 (15.2) 2.50 (63.5) 0.60 (15.2) 5 + OUT 4 0.50 (12.7) 3 0.50 (12.7) 2 Triple output models only: the 5V output common is isolated from the ±12VDC or ±15VDC common. Some units should be derated for operation at 400Hz. Please contact the factory for details. M.T.B.F. figures are based on actual product performance. Consult factory for details. Triple output models only: overvoltage protection is only available on the 5V outputs. All models are only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. COM 1 3.50 (88.9) INSERTS 4.40 THREAD 0.125 (3.2) DEEP 1.60 (40.6) AC 2.20 (55.9) ALL DIMENSIONS IN INCHES (mm) AC 1.60 (40.6) AC 2.20 (55.9) 0.040 (1.0) DIA. PINS B1 B2 B3 0.20 (5.1) MIN. http://www.artesyn.com PAGE 89 DS_PM500CE_20000101.PDF Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.