ASM-SENSOR 8714-01

Do you ever worry about power failure?
POWER HiCORDER 8714-01,8715-01
Recorders
Introducing easy-to-use power monitoring recorders!
See what you’ve been missing !
★ Capture Spikes, Sags, and Surges
★ Monitor and record power anomalies and fluctuations
easily, even unattended
★ Analyze Leakage Currents as well as AC/DC Current up
to 2000 amps
★ True-RMS with Trigger Function
★ 250µsec Transient Waveform Capture
2
Record power anomalies accurately with simple operation !
- Aplications What a Power Recorder Does
There are many power-quality concerns in today's
sags, and record voltage changes with simple operation,
PC-based businesses, and detecting power anomalies
and even monitor and record while totally unattended.
is important for maintaining factory facilities and
The compact B5 size and 1.5kg (52.9oz.) weight provide
equipment. The POWER HiCORDERs 8714-01 and
excellent portability among worksites. (8714-01)
8715 -01 are monitoring recorders that can capture
instantaneous power drop-outs, brown-outs, spikes and
Simple Setup
1. Simple setup. No worries about operability.
2. Accepts direct input of line voltages up to 400 V, and
up to 1000 V AC/ 2000 V DC with the use of the
DIFFERENTIAL PROBE 9322 accessory.
3. Voltage and current can be simultaneously measured on
four isolated channels.
4. Data immediately before an anomaly occurs can be stored
and recorded.
5. High quality data printouts on site.
6. High-speed A/D converter stores data in memory,
providing simple recording of events that cannot be
recorded by a pen recorder.
7. Two measurement functions are
available: Waveform Measurement
Mode (memory mode), and RMS
Trend Measurement Mode (RMS
recorder & memory).
8. HIOKI clamp-on probes (voltageoutput type) can be directly
connected.
Example
To monitor the current waveform on a 220 V
power line.
[ Setup ]
Measurement mode is set to Waveform, time axis to
2ms. Recording length is set to 20 division.
[ Channel setup ]
For current waveforms, after selecting a clamp-on
probe for the input type from Mode, select the range
of the clamp. Here, we select 9010 and 100A. Set
the range of the clamp-on probe in the same way.
[ Starting Measurement ]
Clamp the probe around the conductor to be
measured.
Press the START button.
The current waveform is
displayed on the screen.
To stop measuring, press
the STOP button.
Current Waveform Example
Two models: the two-channel (8714-01) and four-channel (8715-01)
- Specifications Basic Specifications
8714-01
8715-01
Waveform Measurement (Power Waveform Observation) Mode
Waveform Measurement mode (Power Waveform Observation),
Measurement Mode RMS Trend Measurement mode (RMS Observation)
Time axis
Input channels fixed, Analog 2 channels Input channels fixed, Analog 4 channels
Input types and
Inter-channels and input-frame isolation
number of channels Inter-channels and input-frame isolation
Sampling period
Recording length
400k sample/s (2.5μs period)
200 and 400µs, 1, 2, 5, 10, and 20ms/division, time axis zoom
×2 to ×10; 3 settings, compression 1/2 to 1/50; 5 settings
1/80 of time axis ranges (minimum sampling period 2.5µs)
20, 50, 100, 200, or 400 division (800 division at sequential save OFF)
Can record data from before the trigger point, 0/10/20/50, or 100%
of recording length
Maximum sampling rate Simultaneous sampling for 2 or 4 analog channels
Pre-trigger
Memory capacity
continuous 2-channels measurement
(12-bit analog) × 64 kilo-words/ ch
Other functions
External memory
PC Card TYPE II slot × 1 : Flash ATA card (max.1 GB), MS-DOS
format. Memory contents : Settings data, Measurement data
(binary or text format), Screen data (BMP)
RMS Trend Measurement (RMS Fluctuation Measurement) Mode
Measurement objective Commercial mains power (50/60Hz)
25°C/ 77°F).
Time axis
Backup function
continuous 4-channels measurement
(12-bit analog) × 64 kilo-words/ ch
Clock, waveform data and settings, Battery life approx. 5 years (at
Terminal block : trigger input/output
External control
Environment conditions Operation: +5°C/41°F to +40°C/104°F, 35% to 80% relative humidity.
Storage: -10°C/14°F to +50°C/122°F, 35% to 80% relative humidity.
(no condensation)
Safety: EN61010
Sampling period
Recording length
RMS accuracy
Applicable standards EMC: EN61326, EN61000-3-2, EN61000-3-3
Power supplies
Power consumption
Continuous operation time
Charge time
Dimensions and
mass
Supplied
accessories
(1) AC Adapter model 9418 -15 or 9418 -10 (DC 12V ±10%)
(2) BATTERY PACK 9447 (AC adapter has priority when used in
combination with battery pack, fast recharge possible with AC adapter)
Waveform display
area
15VA max.
Approx. 3 hours (with BATTERY PACK 9447, trigger standby at 23°C/ 73°F)
Approx. 2 hours fast charge with power switch OFF (at 23°C/ 73°F)
approx. 280 (11.02) W × 170 (6.69) H × 52 (2.05) approx. 280 (11.02) W × 170 (6.69) H × 52 (2.05)
Dmm (inch), 1.5kg/ 52.91oz (without batteries)
Dmm (inch) , 1.6kg/ 56.44oz (without batteries)
Instruction manual ×1, Measurement guide ×1, Recording paper ×
1, Paper attachment ×2, Blank box ×1, Strap ×1, AC ADAPTER
9418 -15 ×1, CONNECTION CORD 9197 ×2 (8714-01), ×4 (8715-01),
Application disk ×1
Other functions
1/2/5 seconds/DIV (cannot realtime print); 10/30 seconds; 1/2/5/10/30
minutes; or 1hour/DIV, time axis compression 1/2 to 1/50; 5 settings
250µs fixed (RMS value 800 data/second)
Continuous measurement only (up to 200 division of data are stored internally)
±3 % f.s.
100V Line: 75 to 125V rms (standard)
200V Line: 150 to 250V rms (standard)
400V Line: 275 to 525V rms (standard)
Clamp: 0A rms to f.s.value on clamp-on probe (rms)
9322 Differential probe: 400V Line; 275 to 525V rms (standard)
9322 Differential probe: 600V Line; 475 to 725V rms (standard)
Voltage axis normal (×1/2), magnified (×5), Left-right waveform scroll,
Automatic, manual and partial (between A-B cursors) printing, Hybrid
recording: prints logging data for each division together with waveform
RMS Trend Measurement (Instantaneous Waveform Measurement) Mode
Time axis
Sampling period
Recording length
Pre-trigger
Other functions
170 mm
(6.69 in)
Voltage axis normal (×1/2), magnified (×1), Left-right waveform scrolling,
Automatic, manual and partial (between A-B cursors) printing
200 and 400µs, 1, 2, 5, 10, and 20ms/division, time axis zoom
×2 to ×10; 3 settings, compression 1/2 to 1/50; 5 settings
1/80 of time axis ranges (minimum sampling period 2.5µs)
20, 50, 100, or 200 division (400 division at sequential save OFF)
Can record data from before the trigger point, 0/10/20/50, or 100%
of recording length
Voltage axis normal (×1/2), magnified (×1), Left-right waveform scroll
Other Functions
General
52 mm
(2.05 in)
280 mm
(11.02 in)
Mass (8714-01) : approx. 1.5kg/52.91oz
Mass (8715-01) : approx. 1.6kg/56.44oz
DMM Function
Printing of settings including input range, trigger time, etc., cursor
measurement, start condition retention, auto setup, list & gauge
printing, power-save function, DMM function (voltage shown as numerals
on the display), auto saving, partial saving (between A-B cursors or all data),
sequential save.
Display update rate: 1 second
Display contents: RMS value (only measuring DC and 50/60Hz)
Display digit: 4 (last digit 0 to 4 is rounded zero, 5 to 9 is rounded five)
Voltage ranges: Auto-select only (five ranges from 10 mV to 100 V/ div.)
Accuracy: ±3% rdg. ±5dgt.
Recording and Display Section
Display
Recording paper
Recording area
Recording speed
5.7-inch STN color LCD, with English/Japanese language selector
240 × 320 dots
112mm (4.41in) × 18m (59.06ft), thermal paper roll
100mm in full scale (10 divisions), 1 division = 10mm (0.39in)
Max. 1sec/division (with AC adapter use)
Trigger Function (only for anomalous waveform measurement and instantaneous power fluctuation recording)
Trigger source
Analog input CH1 - CH4 (8714-01: CH1 - CH2), external (either ON or
OFF for each source), logical AND/OR of sources
Level trigger: At preset voltage level, on either rising or falling
edge
Window trigger: At entry or exit from preset upper and lower limits
Voltage drop trigger: Especially for 50/60Hz commercial power,
Anomalous
when peak voltage falls below preset value
waveform triggers Period trigger: When period of rising or falling edge of measured
signal exceeds preset period
Waveform judgment trigger: Especially for 50/60Hz commercial
power, to monitor signals outside of judgment range in real time
(when time axis range 20ms/division is not applicable)
Voltage drop trigger: Especially for 50/60Hz commercial power,
when peak voltage falls below preset value
Power fluctuation
measurement triggers RMS level trigger: At preset effective value, on either rising or
falling edge
(valid only when instantaneous
waveform measurement is enabled) RMS window trigger: At entry or exit from preset upper and lower
limit levels
0, 10, 20, 50, 100% (for anomalous waveform measurement, instantaneous
Pre-Trigger
power fluctuation recording)
Level setting resolution 0.25% f.s. (f.s.=10 divisions, 0.1% f.s. for use with waveform judgment trigger)
Off/On (0.5 divisions fixed filter width)
Trigger filter
Input section (accuracy at 23 ±5 ˚C/73 ±9 ˚F after 30 minutes warm-up time; accuracy guaranteed for 1 year)
Input
Isolated BNC terminal, Input item: Voltage, 9010, 9018, 9132,
3283, 3284, 3285, 9322 (selectable)
Voltage : 100, 200, 400V line, or 100V DC
9010 : 10, 20, 50, 100, 200, or 500A
9018 : 10, 20, 50, 100, 200, or 500A
9132 : 20, 50, 100, 200, 500, or 1000A
Measurement range 3283 : 10mA, 100mA, 1, 10, or 200A
3284 : 20 or 200A
3285 : 200 or 2000A
9322 : 400 or 600V line
Max. sampling rate
Accuracy, frequency
characteristics
Low-pass filter
Input resistance and
capacitance
Input coupling
Max. allowable input
400kS/s (simultaneous sampling of all channels)
±0.5% f.s. (applied accuracy of clamp-on probe), DC to 50kHz ±3dB
OFF, 500Hz, 5kHz
1MΩ, 7pF approx. (at 100kHz)
DC (fixed)
450V AC rms, DC CAT II (upper voltage which when applied to between
input pins does not damage them)
Max. rated voltage 450V AC rms, DC (upper voltage which when applied to input channel
casing or between input channels does not damage them)
to earth
Composition of options
Note: Product names appearing herein are trademarks or registered trademarks of various companies.
Record Current Waveform
CARRYING CASE 9648
Hard case type, for storing
options
Supplied with PC
Card adapter
CARRYING CASE 9391
Soft case type, for storing options
Holds more options than the 9648
hard case
CLAMP ON AC/DC HiTESTER
3285
200A or 2000A AC/DC, with
analog output of 1V f.s. DC, and
waveform monitor output of 1V
f.s. AC at 10Hz to 1kHz, or DC.
Requires the AC ADAPTER
9445-02/-03
CLAMP ON PROBE 9018-10
Input from 10 to 500A
40Hz to 3kHz for 0.2V AC output.
BNC terminal
CLAMP ON AC/DC HiTESTER
3284
20A or 200A AC/DC, with
analog output of 1V f.s. DC, and
waveform monitor output of 1V
f.s. AC at 10Hz to 2kHz, or DC.
Requires the AC ADAPTER
9445-02/-03
PC CARD 128M 9726
(128MB capacity)
PC CARD 256M 9727
(256MB capacity)
PC Card Precaution U s e o n l y P C C a rd s s o l d PC CARD 512M 9728
by HIOKI . Compatibility (512MB capacity)
and performance are not guaranteed for PC cards made
by other manufacturers. You
may be unable to read from or
save data to such cards.
Record Current Waveform
C CARD 1G 9729
P
(1GB capacity)
Not CE certified
CLAMP ON PROBE 9132-10
Input from 20 to 1000A
40Hz to 1kHz for 0.2V AC output.
BNC terminal
WAVE PROCESSOR 9335
Data conversion, print functions,
waveform display, compatible with
Windows 95/98/Me, Windows NT
4.0/2000/XP
Input from power-concent
CONCENT INPUT CORD
9448
Use for 100V commercial
line, 2m length
1kV AC, 2kV DC input
CLAMP ON LEAK HiTESTER
3283
For leakage current measurement,
includes 10mA to 200A ranges,
with analog output of 1V f.s. DC,
and waveform monitor output
of 1V f.s. AC at 40Hz to 2kHz.
Requires the AC ADAPTER
9445-02/-03
DIFFERENTIAL PROBE 9322
For inputs up to 2kV DC or
1kV AC, the 9322 requires
the AC ADAPTER 9418-15
AC ADAPTER 9445-02/-03
Use for the 3283, 3284,
3285, for USA/CSA
9445-02, for EU 9445-03
+
POWER HiCORDER 8714-01
(2ch model)
POWER HiCORDER 8715-01
(4ch model)
Not CE certified
CONVERSION ADAPTER
9199
Banana-to-BNC, use to
connect to insulation-BNC
terminal on Input section
Included accessories: AC ADAPTER 9418 -15 ×1, Recording paper ×1, Blank box ×1, Strap ×1,
CONNECTION CORD 9197 (8714 -01: ×2, 8715 -01: ×4), Application disk ×1
RECORDING PAPER
9234
18 m/ 59.06 feet length,
10 rolls/ 1 set
BATTERY PACK 9447
7.2V, 2400mAh
PAPER WINDER 220H
Paper width: 70 to 220 mm,
using special-purpose AC
adapter
LINE SPLITTER CT101A
For 100V/ 15A,
convenient for measuring
100V AC line current with
clamp-on probe
CHARGE STAND 9643
Independent of main unit the
8714-01/8715-01, use with the AC
ADAPTER 9418-15 to charge one
Model BATTERY PACK 9447.
+
Up to 450V AC input
Not CE certified
Not CE certified
OUTPUT CORD 9094
Required along with the
9199 adapter to connect
the 3283/3284/3285 to the
8714-01 or 8715-01
AC ADAPTER 9418-15
Use for the 9322, 100 to 240
V AC
CONVERSION ADAPTER
9199
Banana-to-BNC, use to
connect to insulation-BNC
terminal on Input section
CONNECTION CORD 9197
For up to 500V,
1.5 m length
CONNECTION CORD
9217
Insulation BNC-to-insulation
BNC, use to connect to
insulation-BNC terminal on
Input Module
Input cords of included accessories are the 9197 only. For current
measurement, please purchase the optional clamp-on probe, or clamp-on
tester.
AC ADAPTER 9418-15
Universal 100 to 240 V AC,
12 V DC/ 2.5 A output
n Combination example: 2-channels, with current measurement
Model number ×
quantity
Main unit
Paper
Battery pack
Current up to 500A
Carrying case
8714-01×1
9234×1 (10 rolls)
9447×1
9018-10×2
9391×1
n Combination example: 4-channels, with current measurement
Model number ×
quantity
Main unit
Paper
Battery pack
Current up to 500A
Carrying case
8715-01×1
9234×1 (10 rolls)
9447×1
9018-10×4
9391×1
DISTRIBUTED BY
HEAD OFFICE :
81 Koizumi, Ueda, Nagano, 386-1192, Japan
TEL +81-268-28-0562 / FAX +81-268-28-0568
E-mail: os-com@hioki.co.jp
HIOKI USA CORPORATION :
6 Corporate Drive, Cranbury, NJ 08512 USA
TEL +1-609-409-9109 / FAX +1-609-409-9108
E-mail: hioki@hiokiusa.com
Shanghai Representative Office :
1310 Shanghai Times Square Office
93 Huaihai Zhong Road
Shanghai, 200021, P.R.China
TEL +86-21-6391-0090, 0092
FAX +86-21-6391-0360
E-mail: info@hioki.cn
All information correct as of Jan. 25, 2007. All specifications are subject to change without notice.
8714E4-71E-00P
Printed in Japan