LM741 www.ti.com SNOSC25C – MAY 1998 – REVISED MARCH 2013 LM741 Operational Amplifier Check for Samples: LM741 FEATURES DESCRIPTION • • The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications. 1 2 Overload Protection on the Input and Output No Latch-Up When the Common Mode Range is Exceeded The amplifiers offer many features which make their application nearly foolproof: overload protection on the input and output, no latch-up when the common mode range is exceeded, as well as freedom from oscillations. The LM741C is identical to the LM741/LM741A except that the LM741C has their performance ensured over a 0°C to +70°C temperature range, instead of −55°C to +125°C. Connection Diagrams LM741H is available per JM38510/10101 Figure 1. TO-99 Package See Package Number LMC0008C Figure 2. CDIP or PDIP Package See Package Number NAB0008A, P0008E Figure 3. CLGA Package See Package Number NAD0010A 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1998–2013, Texas Instruments Incorporated LM741 SNOSC25C – MAY 1998 – REVISED MARCH 2013 www.ti.com Typical Application Figure 4. Offset Nulling Circuit These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) (3) LM741A LM741 ±22V ±22V ±18V 500 mW 500 mW 500 mW ±30V ±30V ±30V ±15V ±15V ±15V Continuous Continuous Continuous Operating Temperature Range −55°C to +125°C −55°C to +125°C 0°C to +70°C Storage Temperature Range −65°C to +150°C −65°C to +150°C −65°C to +150°C 150°C 150°C 100°C P0008E-Package (10 seconds) 260°C 260°C 260°C NAB0008A- or LMC0008C-Package (10 seconds) 300°C 300°C 300°C Vapor Phase (60 seconds) 215°C 215°C 215°C Infrared (15 seconds) 215°C 215°C 215°C 400V 400V 400V Supply Voltage Power Dissipation (4) Differential Input Voltage Input Voltage (5) Output Short Circuit Duration Junction Temperature LM741C Soldering Information M-Package ESD Tolerance (1) (2) (3) (4) (5) (6) (6) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not ensure specific performance limits. For military specifications see RETS741X for LM741 and RETS741AX for LM741A. If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications. For operation at elevated temperatures, these devices must be derated based on thermal resistance, and Tj max. (listed under “Absolute Maximum Ratings”). Tj = TA + (θjA PD). For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage. Human body model, 1.5 kΩ in series with 100 pF. Electrical Characteristics (1) Parameter Input Offset Voltage Test Conditions LM741A Min LM741 Typ Max 0.8 3.0 Min LM741C Typ Max 1.0 5.0 Min Typ Max 2.0 6.0 Units TA = 25°C RS ≤ 10 kΩ RS ≤ 50Ω mV TAMIN ≤ TA ≤ TAMAX RS ≤ 50Ω 4.0 RS ≤ 10 kΩ Average Input Offset Voltage Drift (1) 2 mV 6.0 15 7.5 μV/°C Unless otherwise specified, these specifications apply for VS = ±15V, −55°C ≤ TA ≤ +125°C (LM741/LM741A). For the LM741C/LM741E, these specifications are limited to 0°C ≤ TA ≤ +70°C. Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated Product Folder Links: LM741 LM741 www.ti.com SNOSC25C – MAY 1998 – REVISED MARCH 2013 Electrical Characteristics(1) (continued) Parameter Test Conditions Input Offset Voltage Adjustment Range TA = 25°C, VS = ±20V Input Offset Current TA = 25°C LM741A Min Typ 3.0 Min Typ Max ±15 30 20 200 70 85 500 TA = 25°C 30 20 TA = 25°C, VS = ±20V 1.0 80 TAMIN ≤ TA ≤ TAMAX, VS = ±20V 0.5 6.0 Units mV 200 300 nA nA/°C 80 0.210 500 80 1.5 0.3 2.0 0.3 500 nA 0.8 μA 2.0 MΩ TA = 25°C ±12 TAMIN ≤ TA ≤ TAMAX Large Signal Voltage Gain LM741C Max 0.5 TAMIN ≤ TA ≤ TAMAX Input Voltage Range Typ ±15 Average Input Offset Current Drift Input Resistance Min ±10 TAMIN ≤ TA ≤ TAMAX Input Bias Current LM741 Max ±12 ±13 V ±13 TA = 25°C, RL ≥ 2 kΩ VS = ±20V, VO = ±15V 50 V/mV VS = ±15V, VO = ±10V 50 200 20 200 TAMIN ≤ TA ≤ TAMAX, RL ≥ 2 kΩ, VS = ±20V, VO = ±15V 32 V/mV VS = ±15V, VO = ±10V VS = ±5V, VO = ±2V Output Voltage Swing 25 15 10 VS = ±20V RL ≥ 10 kΩ ±16 RL ≥ 2 kΩ ±15 V VS = ±15V RL ≥ 10 kΩ ±12 ±14 ±12 ±14 RL ≥ 2 kΩ ±10 ±13 ±10 ±13 Output Short Circuit TA = 25°C 10 Current TAMIN ≤ TA ≤ TAMAX 10 Common-Mode TAMIN ≤ TA ≤ TAMAX Rejection Ratio RS ≤ 10 kΩ, VCM = ±12V RS ≤ 50Ω, VCM = ±12V Supply Voltage Rejection TAMIN ≤ TA ≤ TAMAX, Ratio VS = ±20V to VS = ±5V RS ≤ 50Ω 25 35 mA 70 80 95 86 96 90 70 90 dB dB 77 96 77 96 TA = 25°C, Unity Gain Rise Time 0.25 0.8 0.3 0.3 μs Overshoot 6.0 20 5 5 % 0.5 0.5 Bandwidth (2) TA = 25°C Slew Rate TA = 25°C, Unity Gain Supply Current TA = 25°C Power Consumption TA = 25°C VS = ±20V 0.437 1.5 0.3 0.7 80 MHz V/μs 1.7 2.8 1.7 2.8 50 85 50 85 150 VS = ±15V (2) 25 40 RS ≤ 10 kΩ Transient Response 25 V mA mW Calculated value from: BW (MHz) = 0.35/Rise Time (μs). Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated Product Folder Links: LM741 3 LM741 SNOSC25C – MAY 1998 – REVISED MARCH 2013 www.ti.com Electrical Characteristics(1) (continued) Parameter LM741A LM741A Test Conditions Min Typ LM741 Max Min Typ LM741C Max Min Typ Max Units VS = ±20V LM741 TA = TAMIN 165 TA = TAMAX 135 mW VS = ±15V TA = TAMIN 60 100 TA = TAMAX 45 75 Thermal Resistance θjA (Junction to Ambient) θjC (Junction to Case) mW CDIP (NAB0008A) PDIP (P0008E) TO-99 (LMC0008C) SO-8 (M) 100°C/W 100°C/W 170°C/W 195°C/W N/A N/A 25°C/W N/A SCHEMATIC DIAGRAM 4 Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated Product Folder Links: LM741 LM741 www.ti.com SNOSC25C – MAY 1998 – REVISED MARCH 2013 REVISION HISTORY Changes from Revision B (March 2013) to Revision C • Page Changed layout of National Data Sheet to TI format ............................................................................................................ 4 Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated Product Folder Links: LM741 5 PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) LM741CH ACTIVE TO-99 LMC 8 500 TBD Call TI Call TI 0 to 70 LM741CH LM741CH/NOPB ACTIVE TO-99 LMC 8 500 Green (RoHS & no Sb/Br) POST-PLATE Level-1-NA-UNLIM 0 to 70 LM741CH LM741CN ACTIVE PDIP P 8 40 TBD Call TI Call TI 0 to 70 LM 741CN LM741CN/NOPB ACTIVE PDIP P 8 40 Green (RoHS & no Sb/Br) SN Level-1-NA-UNLIM 0 to 70 LM 741CN LM741H ACTIVE TO-99 LMC 8 500 TBD Call TI Call TI -55 to 125 LM741H LM741H/NOPB ACTIVE TO-99 LMC 8 500 Green (RoHS & no Sb/Br) POST-PLATE Level-1-NA-UNLIM -55 to 125 LM741H LM741J ACTIVE CDIP NAB 8 40 TBD Call TI Call TI -55 to 125 LM741J U5B7741312 ACTIVE TO-99 LMC 8 500 TBD Call TI Call TI -55 to 125 LM741H U5B7741393 ACTIVE TO-99 LMC 8 500 TBD Call TI Call TI 0 to 70 LM741CH U9T7741393 ACTIVE PDIP P 8 40 TBD Call TI Call TI 0 to 70 LM 741CN (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com (3) 11-Apr-2013 MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA NAB0008A J08A (Rev M) www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated