9HUVLRQ3.0 7(&+1,&$/ 63(&,),&$7,21 02'(/ 12 PW035XS4 &XVWRPHU¶V&RQILUPDWLRQ &XVWRPHU 3W035XS4 %\ 39,¶V&RQILUPDWLRQ &RQILUPHG %\ 3UHSDUHG%\ )25025(,1)250$7,21 $= ',63/$<6,1& &2/80%,$$/,629,(-2&$ +WWSZZZ$=',63/$<6FRP 'DWHMarch 288 7KLVWHFKQLFDOVSHFLILFDWLRQLVVXEMHFWWRFKDQJHZLWKRXWQRWLFH 7KH LQIRUPDWLRQ FRQWDLQHG KHUHLQ LV WKH H[FOXVLYH SURSHUW\ RI 3ULPH 9LHZ ,QWHUQDWLRQDO &R /WG DQG VKDOO QRW EH GLVWULEXWHGUHSURGXFHGRUGLVFORVHGLQZKROHRULQSDUWZLWKRXWSULRUZULWWHQSHUPLVVLRQRI3ULPH9LHZ ,QWHUQDWLRQDO&R /WG 3DJH P-511-414(V:3) PW035XS4 Revision History Rev. 1.0 2.0 Issued Date Apr.30, 2007 Nov.12, 2007 3.0 March 28,2008 Revised Contents NEW Modify Page 27: 14. Delete carton and change packing Change outline The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 P-511-414(V:3) TECHNICAL SPECIFICATION PW035XS4 CONTENTS NO. ITEM PAGE - Cover 1 - Revision History 2 - Contents 3 1 Application 4 2 Features 4 3 Mechanical Specifications 4 4 Mechanical Drawing of TFT-LCD module 5 5 Input / Output Terminals 6 6 Pixel Arrangement and Input Connector Pin No. 9 7 Absolute Maximum Ratings 10 8 Electrical Characteristics 10 9 Power On Sequence 20 10 Optical Characteristics 21 11 Handling Cautions 24 12 Reliability Test 25 13 Block Diagram 26 14 Packing 27 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 P-511-414(V:3) PW035XS4 1. Application This technical specification applies to 3.5” color TFT-LCD module , PW035XS4. The applications of the panel are car TV, portable DVD, DV,GPS, multimedia applications and other AV systems.. 2. Features . Amorphous silicon TFT-LCD panel with LED Backlight unit. . Compatible with NTSC & PAL system . Pixel in stripe configuration . Slim and compact . Image Reversion : Up/Down and Left/Right . Support multi display mode (If you use this mode ,you must use PVI-1004D’s timing controller (made by PVI)) . Wide viewing angle 3. Mechanical Specifications Parameter Specifications Unit Screen Size 3.5 (16:9 diagonal) inch Display Format 320ͪ( RGB )ͪ234 dot Active Area 76.32(H)ͪ42.82(V) mm Pixel Pitch 0.2385(H)ͪ0.1829 (V) mm Pixel Configuration Stripe Outline Dimension 88.0(W) Ø 53.5(H) Ø 3.5(D)(typ.) mm Weight 34²5 g Back-light 6-LED Surface Treatment Anti – Glare Display model Normally white 12 o’clock [Note 10- 1 ] Gray scale inversion direction The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 P-511-414(V:3) PW035XS4 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 P-511-414(V:3) PW035XS4 5. Input / Output Terminals TFT-LCD Module Connector FPC Down Connect , 30Pins , Pitch : 0.5 mm Pin No Symbol I/O Description 1 GLED1 I Ground for LED backlight 2 VLED1 I Supply voltage of LED backlight 3 GLED2 I Ground for LED backlight 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 VLED2 GND VCC VEE VGH STVD STVU CKV U/D OE3 OE2 OE1 VCOM STHL VSS2 VR VG VB VSS1 VDD2 CPH1 CPH2 CPH3 VDD1 R/L OEH STHR I I I I I/O I/O I I I I I I I/O I I I I I I I I I I I/O Supply voltage of LED backlight Ground for logic circuit Supply voltage of logic control circuit for gate driver Negative power for gate driver Positive power for gate driver Vertical start pulse Vertical start pulse Shift clock for gate driver Up / Down control for gate driver Output enable for gate driver Output enable for gate driver Output enable for gate driver Common electrode voltage Start pulse for source driver Ground for analog circuit Video Input R Video Input G Video Input B Ground for digital circuit Supply power of analog circuit Sampling and shift clock for source driver Sampling and shift clock for source driver Sampling and shift clock for source driver Supply power for digital circuit Left / Right control for source driver Output enable for source driver Start pulse for source driver Remark Note 5-7 Note 5-7 Note 5-2 Note 5-3 Note 5-4 Note 5-8 Note 5-8 Note 5-1 Note 5-8 Note 5-5 Note 5-9 Note 5-6 Note 5-8 Note 5-8 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 P-511-414(V:3) PW035XS4 Note5-1: VCOM (Typ.)= 6.0 VPP. Phase of the video signal input and VCOM The relation between these values could refer to 8-1 Operating condition 100% white Composite Video Signal pedestal white ˥ʿ˚ʿ˕ʳ˩˼˷˸̂ʳ ˦˼˺́˴˿ ˩ ˼ʳ˗˖ ʻ˩ ˥ʳʿ˩ ˚ʳʿ˩ ˕ʼ Black ˩ ˼ʳ˔˖ Black white ˩ ˖ˢˠ ˩ ˖ˢˠʳ˗˖ ˩ ˖ˢˠʳ˔˖ ˩ ˘˘ ˩ ˘˘ʳ˗˖ ˩ ˘˘ʳ˔˖ 1H 1H Liquid crystal transmission of the video signal input , VCOM and timing VCOM H Level L Level Video Signal Input Maximum Black White Video Signal Input Minimum White Black White : maximum transmission / Black : minimum transmission Note 5-2 : VCC TYP.Ј+3.3V Note 5-3 : VEE TYP.Ј-12V Note 5-4 : VGH TYP.Ј+17V Note 5-5 : VDD2 TYP.Ј+5V The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 P-511-414(V:3) PW035XS4 Note 5-6 : VDD1 TYP.Ј+3.3V Note 5-7 : ILED1 , ILED2 TYP.=20 mA Note 5-8: STHL,STHR and R/L mode R/L High(VDD1) Low(0 Volt.) STHL Output Input STHR Input Output Remark Left to Right Right to Left STVD Input Output STVU Output Input Remark Down to Up Up to Down STVD,STVU and U/D mode U/D High(VCC) Low(0 Volt.) ˨˂˗ʻˣ˜ˡʳ˄˅ʼː˟̂̊ʳ˥˂˟ʻˣ˜ˡʳ˅ˋʼː˛˼˺˻ ˨˂˗ʻˣ˜ˡʳ˄˅ʼː˛˼˺˻ʳ˥˂˟ʻˣ˜ˡʳ˅ˋʼː˟̂̊ Note 5 –9 : The CPH1 reference Fig.8-1 Sampling clock timing CPH2 and CPH3 connect GND. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 P-511-414(V:3) PW035XS4 6. Pixel Arrangement R G B R G B R R G B R G B 2 nd line R G B G B 1 st line 3 rd line R G B R G B R G B 320 th pixel 1 st pixel 1Pixel= R G R G B 232 th line R G B R G B 233 th line R G B R G B R G B B 234 th line R G B R G B R G B The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 P-511-414(V:3) PW035XS4 7. Absolute Maximum Ratings : The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Symbol VDD2 MIN. -0.3 GND = 0 VΔTa = 25 к MAX. Unit Remark +5.8 V VDD1 -0.3 +7.0 V VCC -0.3 +6.0 V VGH-VEE -0.3 +40.0 V H Level VGH -0.3 +25.0 V L Level VEE -16 +0.3 V Parameter Supply Voltage For Source Driver Supply Voltage For Gate Driver 8. Electrical Characteristics 8-1) Operating Condition for TFT-LCD panel Ta=25к Parameter Supply Voltage For Source Driver Supply Voltage For Gate Driver Symbol MIN. Analog VDD2 +4.5 Typ. +5.0 MAX. +5.5 Logic VDD1 +3.0 +3.3 +3.6 VGH +4.5 +15 +5.0 +17 +5.5 +19 V VEE DC -13 -12 -10.5 V VEE AC - +6.0 - VP-P +3.0 +3.3 +3.6 +4.5 +5.0 +5.5 Logic VCC Unit V V Note 8-2 - +3.6 +4.0 V (VR , VG , VB) ViDC - 2.5 - V VIH VIL VOH VOL 0.7 VDD1 -0.3 0.7 VDD1 -0.3 - VDD1 0.3 VDD1 VDD1 0.3 VDD1 V V V V VCOM AC - +6.0 - VCOM DC - 1.5 - Digital output voltage VCOM DC Component of VEE AC Component of VEE Depend on T/C Signal voltage ViAC H level L level H level L level Depend on T/C Signal voltage V Analog Signal input Level Digital input voltage Remark AC Component VP-P of V COM DC Component V of VCOM Note 8-1 Note 8-1 : PVI strongly suggests that the VCOM DC level shall be adjustable , and the adjustable level range is 1.5V̈́1V , every module’s VCOM DC level shall be carefully adjusted to show a best image performance. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 P-511-414(V:3) PW035XS4 Note 8-2: Both NTSC and PAL system Video Signal input waveform is based on 8 steps gray scale. 3.6~4.0V 8-2) Recommended driving condition for LED backlight Parameter Supply voltage of LED backlight Supply current of LED backlight Symbol Ta = 25 к Remark Min TYP MAX Unit - - (10.8) V Note 8-3 - 20 - mA Note 8-4 - - 432 mW Note 8-3/Note 8-5 VLED1 VLED2 ILED1 ILED2 Backlight Power Consumption PLED Note 8-3 : ILED= 20mA,constant current Note 8-4 : The LED driving condition is defined for each LED module. (3 LED Serial) Input current = 20mA * 2 Note 8-5 : PLED = VLED1* ILED1 + VLED2* ILED2 . VLED-1 Anode Cathode VLED-2 Ta = 25 к Remark 8-7) Power Consumption Parameter Supply current for Gate Driver (Hi level) Symbol Conditions TYP. MAX Unit IGH mA VGH Ј+17V 0.1 0.3 Supply current for Gate Driver (Low level) IEE mA VEE center voltage VEE Ј-12V 0.1 0.3 Supply current for Source Driver(Digital) IDD1 mA VDD1Ј+3.3V 0.8 1.6 Supply current for Source Driver(Analog) IDD2 VDD2Ј+5V 0.35 7.0 mA Supply current for Gate Driver (Digital) ICC VCC Ј+3.3V 0.1 0.3 mA - - 23.4 50 mW PLED - 396 432 mW - - 420 482 mW LCD Panel Power Consumption Backlight Power Consumption Total Power Consumption The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 P-511-414(V:3) PW035XS4 8-4)ʳ˧˼̀˼́˺ʳ˖˻˴̅˴˶̇˸̅˼̆̇˼˶̆ʳˢ˹ʳ˜́̃̈̇ʳ˦˼˺́˴˿̆ Characteristics Rising time Falling time High and low level pulse width CPH pulse duty STH setup time STH hold time STH pulse width STH period OEH pulse width Sample and hold disable time OEV pulse width CKV pulse width Clean enable time Horizontal display timing range STV setup time STV hold time STV pulse width Horizontal lines per field Vertical display start Vertical display timing range VCOM rising time VCOM falling time VCOM delay time RGB delay time Symbol tr tf tCPH tCWH tSUH tHDH tSTH tH tOEH tDIS1 tOEV tCKV tDIS2 tDH tSUV tHDV tSTV tV tSV tDV trCOM tfCOM tDCOM tDRGB Min. 147 30 20 20 61.5 400 400 256 Typ. 156 50 1 63.5 1.6 4.4 12 32 6 320 262 3 234 - Max. 10 10 166 70 65.5 1 268 5 5 3 1 Unit ns ns ns % ns ns tCPH Ӵs Ӵs Ӵs Ӵs Ӵs Ӵs tCPH ns ns tH tH tH tH Ӵs Ӵs Ӵs Ӵs Remark CPH1~CPH3 CPH1~CPH3 STHR,STHL STHR,STHL STHR,STHL STHR,STHL OEH OEV CKV STVU,STVD STVU,STVD The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 P-511-414(V:3) PW035XS4 ˄˃ʸ ̇̅ ˌ˃ʸ ˌ˃ʸ ̇˹ ˄˃ʸ ˋˀˈʼʳ˦˼˺́˴˿ʳ˧˼̀˼́˺ʳ˪˴̉˸˹̂̅̀̆ʳ ˖ˣ˛ˆ ʻ˟ʼ ˖ˣ˛˅ ʻ˟ʼ ˖ˣ˛˄ ˦˧˛˟ʻ˥ʼ ˈ˃ʸ ̇˖˪˛ ˈ˃ʸ ̇˖ˣ˛ ̇˦˨˛ ̇˦˧˛ ̇˛˗˛ ˺ ́ ˼ ̀ ˼ ̇ ʳ ˾ ˶ ̂ ˿ ˶ ʳ ˺ ́ ˼ ˿ ̃ ̀ ˴ ˦ ʳ ˄ ˀ ˋ ʳ ˁ ˺ ˼ ˙ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 P-511-414(V:3) ˙˼˺ˁʳˋˀ˅ʳ˛̂̅˼̍̂́̇˴˿ʳ˷˼̆̃˿˴̌ʳ̇˼̀˼́˺ʳ̅˴́˺˸ ˖ˣ˛˄ ˢ̈̇̃̈̇ ʻ˦˧˛˥˂˦˧˛˟ʼ ˜́̃̈̇ ʻ˦˧˛˟˂˦˧˛˥ʼ ̇˗˛ PW035XS4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 P-511-414(V:3) Fig. 8-3 (a) Horizontal timing White ˩˜˔˖ Blank V(R,G,B) ˩˜˗˖ ˩˘˘ʳ˗˖ ˩˘˘ ˩˖ˢˠ CKV OE 1,2,3 STHL(R) OEH (HSY) ˩˶̂̀ˀ ˗˖ Black 1H ˩˜˔ ̇˛ White Blank Black ˩˘˘ʳ˔˖ ˩˶̂̀ˀ ˔˖ PW035XS4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 P-511-414(V:3) ˩ʻ˥ʿ˚ʿ˕ʼ ˩ ˘˘ ˩ ˘˘ʳ˗˖ ˩ ˖ˢ ˠ ˖˞˩ ˢ˘ʳʳ˄ʿʳ˅ʿʳˆ ˦˧˛˟ʻ˥ʼ ˢ˘˛ ʻ˛˦ˬʼ ˙˼˺ˁʳˋˀˆʳʻ˵ʼʳ˗˸̇˴˼˿ʳ˻̂̅˼̍̂́̇˴˿ʳ̇˼̀˼́˺ ˡ̂̇˸ʳˍʳ˧˻˸ʳ˹˴˿˿˼́˺ʳ˸˷˺˸ʳ̂˹ʳˢ˘˩ʳ̆˻̂̈˿˷ʳ˵˸ʳ̆̌́˶˻̅̂́˼̍˸˷ʳ̊˼̇˻ʳ̇˻˸ʳ˹˴˿˿˼́˺ʳ˸˷˺˸ʳ̂˹ʳˢ˘˛ ̇ ˗˥˚˕ ̇̅ ˖ˢˠ ˌ˃ʸ ˈ˃ʸ ̇ ˗˜˦˅ ̇ ˢ˘˩ ˄˃ʸ ̇ ˢ˘˛ ̇ ˗˖ˢˠ ̇ ˖˞˩ ̇ ˗˜˦˄ ˄˛ ˩ ˘˘ʳ˔˖ ̇˦˧˛ ˌ˃ʸ ˄˃ʸ ̇˹ ˖ˢˠ PW035XS4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 P-511-414(V:3) ˙˼˺ˁʳˋˀˇʳ˩˸̅̇˼˶˴˿ʳ̆˻˼˹̇ʳ˶˿̂˶˾ʳ̇˼̀˼́˺ ˖˞˩ ˦˧˩˨ʻ˗ʼ ̇ ˦˄˩ ˄˛ ̇ ˛˅˩ ̇˖˞˩ PW035XS4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 P-511-414(V:3) PW035XS4 ˩˖ˢˠʳʻ˘̉˸́ʳ˹˼˸˿˷ʼ ˩˖ˢˠʳʻˢ˷˷ʳ˹˼˸˿˷ʼ ˦˧˩˨ ʻ˩˦ˬʼ ʻ˛˦ˬʼ ˩ʻ˥ʿ˚ʿ˕ʼ ˗˼̆̃˿˴̌ʳ̂́ʳ̃˴́˸˿ʳ˹˼̅̆̇ʳ˿˼́˸ ˙˼˺ˁʳˋˀˈʳʻ˴ʼʳ˩˸̅̇˼˶˴˿ʳ̇˼̀˼́˺ʳʻ˙̅̂̀ʳ˨̃ʳ̇̂ʳ˗̂̊́ʼ ̇̆̉ Vertical timing (From up to down) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 P-511-414(V:3) PW035XS4 ˩˖ˢˠʳʻ˘̉˸́ʳ˹˼˸˿˷ʼ ˩˖ˢˠʳʻˢ˷˷ʳ˹˼˸˿˷ʼ ˦˧˩˗ ʻ˩˦ˬʼ ʻ˛˦ˬʼ ˩ʻ˥ʿ˚ʿ˕ʼ ˗˼̆̃˿˴̌ʳ̂́ʳ̃˴́˸˿ʳ˹˼̅̆̇ʳ˿˼́˸ ˙˼˺ˁʳˋˀˈʳʻ˵ʼʳ˩˸̅̇˼˶˴˿ʳ̇˼̀˼́˺ʳʻ˙̅̂̀ʳ˗̂̊́ʳ̇̂ʳ˨̃ʼ ̇̆̉ Vertical timing (From down to up) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 P-511-414(V:3) PW035XS4 9. Power On Sequence The Power on Sequence only effect by VCC,VSS,VDD,VEE and VGH, the others do not care. ˩ ˚˛ ˩ ˗ ˗ ˄ ʿ˩ ˖ ˖ ˩ ˦ ˦ ʻ˃ ˩ ʼ ˩˘˘ O FF O FF ON T1 T3 T2 ˟ ̂ ˺ ˼˶ ʳ̆ ˼˺ ́ ˴ ˿ ˩ ˖ ˢ ˠ ʿ˩ ˚ ˟ ˥ ˚ ˕ ˀ˩ ˼˷ ˸ ̂ ʳ̆ ˼˺ ́ ˴ ˿ O FF O FF B a c k lig h t ON >10m s T4 >10m s 1) 10msɩT1<T2 2) 0ms<T3ЉT4Љ10ms The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 P-511-414(V:3) PW035XS4 10. Optical Characteristics 10-1) Specification: Parameter Viewing Angle Symbol Horizontal Ӱ21, Ӱ22 Ӱ11 Vertical Ӱ12 Contrast Ratio CR Condition CRЊ10 At optimized Viewing angle TYP. MAX. 60 --40 --50 --- Unit deg deg deg Note 10-1 200 350 --- - Note 10-2 Tr Tf Ӱ=0̓ ----- 15 25 20 30 ms ms Note 10-4 Uniformity U 9 point 75 80 --- - Note 10-3 Brightness L x y - Ӱ=0̓ Ӱ=0̓ Ӱ=0̓ +25к 300 0.29 0.31 20000 350 0.32 0.34 30000 --0.35 0.37 --- cd/ф hrs Note 10-5 Response time Rise Fall MIN. 55 35 45 Ta = 25к Remarks White Chromaticity LED Life time Note 10-1 : The definitions of viewing angles Luminance when Testing point is White Luminance when Testing point is Black (Testing configuration see 10-2 ) Contrast Ratio is measured in optimum common electrode voltage. Note 10-2 : CR Ј The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 P-511-414(V:3) PW035XS4 Note 10-3 : Topcon BM-7(fast) luminance meter 1.0̓field of view is used in the testing (after 10 minutes operation). U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points 25% 50% 75% 1 4 7 25% 2 5 8 50% 3 6 9 75% Note 10-4 : The definition of response time : White Black White 100% 90% Brightness 10% 0% Tr Tf Note 10-5: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25к and ILED =20mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 P-511-414(V:3) PW035XS4 10-2) Testing configuration BM-7(fast) Caution: 1. Environmental illuminationЉ1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best 500mm CR. R,G,B signal input Pattern generator y LCD Backlight LCD Display Testing Point Pattern A y R, G, B Waveform of Pattern A at Testing Point 63.6Ӵs Testing Point Pattern B RGB waveform Vcom 63.6Ӵs Vw=1.3V +/- 0.2V y R, G, B Waveform of Pattern B at Testing Point 63.6Ӵs 63.6Ӵs RGB waveform Vcom Vb=5.0V +/- 0.2V The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23 P-511-414(V:3) PW035XS4 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. b) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. c) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 11-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24 P-511-414(V:3) PW035XS4 12. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration test (non-operating) 8 Shock Test(non-operating) 9 Electrostatic Discharge Test (non-operating) Test Ta = +85к, 240 hrs Ta = -30к, 240 hrs Ta = +75к, 240 hrs Ta = -20к, 240 hrs Condition Note Ta = +60к, 95%RH, 240 hrs -30к Ч Ш +80к , 100 Cycles 60 min 60 min Frequency : 10 ~ 55Hz Amplitude : 1mm , sweep time : 11 mins Test period : 6 cycles for each direction of X,Y, Z 100G , 6ms , 3cycles for each direction of X,Y,Z 200pF, 0Ө Machine mode = ̈́200V 1 time / each terminal Ta: ambient temperature [Criteria] In the standard conditions, there is not display function NG issue occurred. (including : line defect ,no image). All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25 P-511-414(V:3) PW035XS4 13. Block Diagram ˟ ˖ ˗ ʳˣ ˴ ́ ˸ ˿ ˛ ʳ˗ ̅ ˼ ̉ ˸ ̅ ʻ˦ ̂ ̈ ̅˶ ˸ʼ ˩ ʳ˗ ̅ ˼ ̉ ˸ ̅ ʻ˚ ˴ ̇˸ ʼ ˕ ˴ ˶ ˾ ˀ˿˼˺ ˻ ̇ In p u t The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:26 P-511-414(V:3) PW035XS4 14. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:27