ISDN S Interface Hybrid APC14103e-F ELECTRICAL SPECIFICATIONS @ 25°C OPERATING TEMPERATURE 0°C TO 70°C Choke Turns Ratio +/-5% Primary Inductance mH min Leakage Inductance uH max Primary DCR OHMS +/- 30% Secondary DCR OHMS +/- 30% Inductance per line mH nom DCR per line OHMS 1CT:2.5 20 10 2.4 3.5 0.04 0.4 NOTES: ISOLATION PRI:SEC 1500VRMS PART USED WITH MOTOROLA MC145574IC (MCK 143454 PROVIDES ISOLATION OF SELV AND TNV3 CIRCUITS IN ACCORDANCE WITH IEC 60950, EN 60950, UL 60950, ACA TS001 AND AS/NZS 60950 END SYSTEM COMPLIANCE TO IEC 60950, EN 60950, UL 60950, ACA TS001 AND AS/NZS 60950 IS THE RESPONSIBILITY OF THE INSTALLER SCHEMATIC V� dd �� 4� 1� 3� T� NV�3� Rx� 1� 1� 6� S� EL �V �� V� dd �� 1� 5� 1� 0� 8� 9� T� NV�6� Tx� 5� 1� 2� S� EL �V �� MECHANICAL DOT ON TOP SURFACE INDICATES PIN 1 PIN DIAMETER 0.75MM MAX PINS 11 AND 14 REMOVED APC 14103E-F NOTES: NOT TO SCALE TOLERANCE +/- 0.2MM ALL DIMENSIONS IN MM ©2006 Bel Fuse Inc. Specifications subject to change without notice. 04.12.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Page 1