BOT BOD100

This
component
is RoHS
compliant
BOD100
TO18 Plastic
Phototransistor
Pb
FEATURES
• Min/max light current selection.
• Good optical to mechanical alignment
• Ambient visible light filtering.
• Black body gives easy recognition
from IR emitter.
DESCRIPTION
The BOD100 is a silicon
phototransistor encapsulated
in an Infrared transparent black
TO18 package
MECHANICAL DATA
4.72±0.1
NOM RAD 1.52
45°
5.75 ±0.2
REFERENCE SURFACE
0.76 NOM
EMITTER
20.3 MIN
NOTES
1.27 NOM
COLLECTOR 1. DIMENSIONS mm
2. TOLERANCE +/- 0.25 UNLESS STATED
3. TAB DENOTES EMITTER
2.54
0.5 SQ NOM
5.46±0.25
R0.5 NOM
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: bill@bot.co.uk
PAGE 1
ISS A 15.4.02
45°
This
component
is RoHS
compliant
BOD100
TO18 Plastic
Phototransistor
Pb
ABSOLUTE MAXIMUM RATINGS (25oC unless otherwise noted)
STORAGE TEMP
-40 C TO +100oC
OPERATING TEMP
-40 C TO 100oC
COLLECTOR-EMITTER VOLTAGE
30V
EMITTER-COLLECTOR VOLTAGE
5.0V
100mW (1)
POWER DISSIPATION
240oC for 5secs(2,3,5)
LEAD SOLDERING TEMPERATURE (Iron)
260oC for 10secs
LEAD SOLDERING TEMPERATURE9(Flow)
OPTO ELECTRONIC DATA(Ta=25oC unless stated)
PARAMETER
SYMBOL
MIN
Collector-Emitter Breakdown
V(BR)CEO
Emitter-Collector Breakdown
V(BR)ECO
Collector-Emitter Dark Current
On state Collector Current
TYP
MAX
UNITS
TEST CONDISTIONS
30.0
V
Ic = 100μA
5.0
V
Ie = 100μA
100
nA
Vce= 10.0V, Ee = 0
11.5
mA
Vce=5.0V.H=1.5mW/
Sq.cm (6)
ICEO
IC(ON) (3)
(4)
7.5
Reception angle at half sensitivity.
Θ
±20
Deg
Rise Time
Tr
8.0
mS
Ic=0.2mA,Vcc=5V,
Rl=100Ω
Fall Time
Tf
8.0
mS
Ic=0.2mA,Vcc=5V,
Rl=100Ω
V
Ic=0.6mA,Ee=).5mW/
sq.cm.(6)
Vce
Saturation Voltage
0.40
NOTES
o
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: bill@bot.co.uk
PAGE 2 ISS A
15.4.02
o
1. Derate power dissipation linearly at 1.33mW/ C above 25 C.
2. RMA flux is recommended.
3. Methonal or Isopropylalcohols are recommended as cleaning agents.
4. Solder iron tip 1.6mm minimum from housing.
5. Leads not to be under strees or tension.
6. Light source is AlGaAs Led with peak wavelength of 880nm.