BRIGHT LED ELECTRONICS CORP. BL-B2141-TBS18C SINCE 1981 ● Features: ● Package dimensions: 1. Chip material: GaP/GaP 2. Emitted color : Green 3.00(.118) 3. Lens Appearance : Green Diffused 4. Low power consumption. 5.30(.209) 0.81(.032) 5. High efficiency. 6. Versatile mounting on P.C. Board or panel. 1.5(.059) MAX. 7. Low current requirement. 8. 3mm diameter package 25.4(1.00) MIN. substance, compliance ROHS standard. CATHODE 9. This product don’t contained restriction 0.5(.02) SQ.TYP. 3.80(.150) 1.00(.039) MIN. Flat Denotes Cathode 2.54(.100) NOM. ● Applications: 1. TV set 2. Monitor Notes: 3. Telephone 1. All dimensions are in millimeters (inches). 4. Computer 2. Tolerance is ±0.25mm (0.01”) unless otherwise specified. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. 5. Circuit board ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Pd 80 mW Forward Current IF 30 mA Peak Forward Current*1 IFP 150 mA Reverse Voltage VR 5 V Operating Temperature Topr -40℃~80℃ Storage Temperature Tstg -40℃~85℃ Soldering Temperature Tsol 260℃(for 5 seconds) 1 * Condition for IFP is pulse of 1/10 duty and 0.1msec width. Ver.1.0 Page: 1 of 3 BRIGHT LED ELECTRONICS CORP. BL-B2141-TBS18C SINCE 1981 ● Electrical and optical characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF=20mA - 2.2 2.6 V Luminous Intensity Iv IF=20mA - 40.0 - mcd Reverse Current IR VR=5V - - 100 µA Peak Wave Length λp IF=20mA - 568 - nm Dominant Wave Length λd IF=20mA 560 - 576 nm Spectral Line Half-width ∆λ IF=20mA - 30 - nm Viewing Angle 2θ1/2 IF=20mA - 35 - deg ● Typical Electro-Optical Characteristics Curves Fig.1 Relative intensity vs. Wavelength Fig.2 Forward current derating curve vs. Ambient temperature 1.0 60 Forward current(mA) Relative radiant intensity 50 0.5 40 30 20 10 0 520 570 0 620 20 Wavelength λ (nm) Fig.3 Forward current vs. Forward voltage Relative luminous intensity 30 20 10 100 1 2 3 4 2.5 2.0 1.5 1.0 0.5 0 -40 5 -20 0 20 40 60 Ambient temperature Ta(℃) Forward voltage(V) Fig.5 Relative luminous intensity vs. Forward current Fig.6 Radiation diagram 0 2.0 10 20 30 Relative radiant intensity Relative luminous intensity(@20mA) 80 3.0 40 Forward current(mA) 60 Fig.4 Relative luminous intensity vs. Ambient temperature 50 0 40 Ambient temperature Ta(℃) 1.5 1.0 0.5 1.0 40 0.9 50 0.8 60 70 0.7 80 90 0 10 20 30 40 50 0.5 0.3 0.1 0.2 0.4 0.6 Forward current (mA) Ver.1.0 Page: 2 of 3 BRIGHT LED ELECTRONICS CORP. BL-B2141-TBS18C SINCE 1981 ● Tapping and packaging specifications(Units: mm) 3.0(.118) 3.8(.150) H1--------------------18.0(.709)±0.5 L------------------------11.0(.433) Max. 5.3(.209) Cathode Wo--------------------------------9.0(.35) P1------------------------------5.0(.196) H1 F--------------------------------2.54(0.1) W2 P-------------------------------12.5(.49) L Wo W1 D----------------------------- 4.0(.157) W3 W1---------------------------10.0(.394) P1 F T D TxSxxx (2.54 PITCH STRAIGHT LEADS) P USER DIRECTION OF FEED W2----------------------4.0(.157) Max. W3---------------------------18.0(.708) T-----------------------1.42(.055) Max. Notes: 1.All dimensions are in millimeter (inch). 2.Tolerance is ±0.25mm (0.01”) unless otherwise specified. 3.Lead spacing is measured where the leads emerge from the package. 4.The stopper is used as the tie bar. ● Bin Limits 1. Intensity Bin Limits (At IF= 20mA) Bin Code Min. (mcd) Max. (mcd) : : : K 11 . 0 21.0 L 16.0 32.0 M 24.0 48.0 N 37.0 72.0 P 55.0 11 0 . 0 : : : ● Bin： x Intensity bin code Ver.1.0 Page: 3 of 3