PHOTOCOUPLER PS2703-1 HIGH ISOLATION VOLTAGE HIGH COLLECTOR TO EMITTER VOLTAGE TYPE −NEPOC SOP MULTI PHOTOCOUPLER Series− DESCRIPTION The PS2703-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This is mounted in a plastic SOP (Small Outline Package) for high density applications. This package has shield effect to cut off ambient light. FEATURES • High isolation voltage (BV = 3 750 Vr.m.s.) • High collector to emitter voltage (VCEO = 120 V) • SOP (Small Outline Package) type • Each isolated channel per package • High-speed switching (tr, tf = 10 µs TYP.) • Taping product number: PS2703-1-F3, F4 • UL approved: File No. E72422 (S) • VDE0884 approved (Option) APPLICATIONS • Hibrid IC • Telephone/FAX • FA/OA equipment • Programmable logic controllers • Power supply ORDERING INFORMATION (Solder Contains Lead) Part Number PS2703-1 Package 4-pin SOP Safety Standard Approval Standard specification products • UL approved PS2703-1-V 4-pin SOP VDE0884 specification products (Option) ORDERING INFORMATION (Pb-Free) Part Number PS2703-1-A Package 4-pin SOP Safety Standard Approval Standard specification products • UL approved PS2703-1-V-A 4-pin SOP Document No. PN10242EJ01V0DS (1st edition) (Previous No. P11308EJ6V0DS00) Date Published February 2003 CP(K) VDE0884 specification products (Option) The mark shows major revised points. PS2703-1 PACKAGE DIMENSIONS (in millimeters) PS2703-1 4.0±0.5 TOP VIEW 4 1 3 2 1. Anode 2. Cathode 3. Emitter 4. Collector 2 0.15 +0.10 –0.05 2.0 0.1±0.1 2.1.±0.2 7.0±0.3 4.4 2.54 0.4 +0.10 –0.05 0.5±0.3 0.25 M Data Sheet PN10242EJ01V0DS PS2703-1 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 6 V ∆PD/°C 0.8 mW/°C PD 80 mW IFP 1 A Collector to Emitter Voltage VCEO 120 V Emitter to Collector Voltage VECO 6 V IC 30 mA ∆PC/°C 1.5 mW/°C PC 150 mW BV 3 750 Vr.m.s. Operating Ambient Temperature TA –55 to +100 °C Storage Temperature Tstg –55 to +150 °C Diode Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10242EJ01V0DS 3 PS2703-1 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1 MHz MIN. TYP. MAX. Unit 1.1 1.4 V 5 µA 30 Transistor Collector to Emitter Dark Current ICEO IF = 0 mA, VCE = 120 V Coupled Current Transfer Ratio CTR IF = 5 mA, VCE = 5 V 50 150 IF = 1 mA, VCE = 5 V 10 80 *1 (IC/IF) 100 nA 400 % 0.3 V Collector Saturation Voltage VCE (sat) Isolation Resistance RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF VCC = 5 V, IC = 2 mA, RL = 1 kΩ 10 µs Rise Time Fall Time *2 tr *2 IF = 10 mA, IC = 2 mA tf CTR rank CTR (%) Conditions K 200 to 400 IF = 5 mA, VCE = 5 V 80 to IF = 1 mA, VCE = 5 V 100 to 300 IF = 5 mA, VCE = 5 V 25 to IF = 1 mA, VCE = 5 V 50 to 150 IF = 5 mA, VCE = 5 V 10 to IF = 1 mA, VCE = 5 V L M *2 Test circuit for switching time Pulse Input IF VCC PW = 100 µs Duty Cycle = 1/10 In monitor 50 Ω 10 Ω 11 10 *1 CTR rank 4 pF VOUT RL = 1 kΩ Data Sheet PN10242EJ01V0DS PS2703-1 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 75 50 25 25 0 50 75 200 150 1.5 mW/˚C 100 50 25 0 100 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 100 10 1 +25 ˚C 0 ˚C –25 ˚C –55 ˚C 0.1 0.01 0.6 0.8 1.0 1.2 1.4 10 8 4 mA 6 3 mA 4 2 mA 2 1.6 0 1 mA 0.5 mA 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 50 000 10 10 000 5 000 5 1 000 500 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) TA = +100 ˚C +75 ˚C +50 ˚C IF = 10 Collector Current IC (mA) Forward Current IF (mA) mA 5 mA VCE = 40 V 24 V 10 V 100 50 10 5 1 0.5 0.1 –60 –40 –20 0 20 40 60 80 100 IF = 25 mA 10 mA 5 mA 2.5 mA 2 mA 1.5 mA 1 mA 1 0.5 0.5 mA 0.1 0.0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) Ambient Temperature TA (˚C) Data Sheet PN10242EJ01V0DS 5 PS2703-1 CURRENT TRANSFER RATIO vs. FORWARD CURRENT ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; 300 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 ˚C, IF = 5 mA, VCE = 5 V 0.2 0.0 –55 –25 0 25 50 75 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 250 200 150 100 50 0 0.1 100 0.5 1 5 10 Ambient Temperature TA (˚C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 100 50 1.2 VCC = 5V, IC = 2 mA tf 1.0 tr 10 Normalized Gain GV Switching Time t ( µ s) VCE = 5 V td ts 1 RL = 1 kΩ 510 Ω 300 Ω 100 Ω 0.8 0.6 0.4 0.2 0.1 10 100 0.0 0.5 10 k 1k 50 100 SWITCHING TIME vs. LOAD RESISTANCE LONG TIME CTR DEGRADATION 500 1.2 CTR Dgradation (Relative Value) Switching Time t ( µ s) 10 Frequency f (kHz) IF = 5 mA, VCC = 5 V, CTR = 90 % tf 100 ts 10 tr td 1 1 10 100 1.0 0.8 IF = 1 mA, TA = 25 ˚C IF = 5 mA, TA = 25 ˚C IF = 20 mA, TA = 25 ˚C IF = 20 mA, TA = 60 ˚C 0.6 0.4 0.2 0.0 1 102 103 104 Time (Hr) Load Resistance RL (kΩ) Remark The graphs indicate nominal characteristics. 6 5 Load Resistance RL (Ω) 1 000 0.1 1 Data Sheet PN10242EJ01V0DS 105 106 PS2703-1 TAPING SPECIFICATIONS (in millimeters) 1.55±0.1 2.9 MAX. 7.4±0.1 5.5±0.05 1.5+0.1 –0 12.0±0.2 2.0±0.05 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.4±0.1 4.6±0.1 0.3 8.0±0.1 Tape Direction PS2703-1-F4 PS2703-1-F3 Outline and Dimensions (Reel) φ 21.0±0.8 φ 13.0±0.2 R 1.0 φ 100±1.0 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 13.5±1.0 17.5±1.0 11.9 to 15.4 Outer edge of flange Packing: 3 500 pcs/reel Data Sheet PN10242EJ01V0DS 7 PS2703-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. 8 Data Sheet PN10242EJ01V0DS PS2703-1 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10242EJ01V0DS 9 PS2703-1 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884) Parameter Symbol Speck Unit Application classification (DIN VDE 0109) for rated line voltages ≤ 300 Vr.m.s. IV for rated line voltages ≤ 600 Vr.m.s. III Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21 Dielectric strength maximum operating isolation voltage. Test voltage (partial discharge test procedure a for type test and random test) UIORM 710 Vpeak Upr = 1.2 × UIORM, Pd < 5 pC Upr 850 Vpeak Test voltage (partial discharge test procedure b for all devices test) Upr 1 140 Vpeak UTR 6 000 Vpeak Upr = 1.6 × UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN VDE 0109) 2 Clearance distance >5 mm Creepage distance >5 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI Material group (DIN VDE 0109) 175 III a Storage temperature range Tstg –55 to +150 °C Operating temperature range TA –55 to +100 °C Isolation resistance, minimum value VIO = 500 V dc at TA = 25 °C Ris MIN. VIO = 500 V dc at TA MAX. at least 100 °C Ris MIN. 12 Ω 11 10 Ω 10 Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Tsi 150 °C Current (input current IF, Psi = 0) Isi 200 mA Power (output or total power dissipation) Psi 300 mW Ris MIN. 10 Isolation resistance VIO = 500 V dc at TA = 175 °C (Tsi) 10 Data Sheet PN10242EJ01V0DS 9 Ω 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.