CHEMI-CON EKZG6R3ESS222MJ20S

Engineering Bulletin
Tentative
No.705F / Nov.2004
For your computer MOTHERBOARDS
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors
@Super low ESR/impedance capacitors due to very low resistivity electrolyte
@Rated voltage range : 6.3 to 16V, Nominal capacitance range : 470 to 3,300MF
@Assured lifetime: 2,000 hours at 105C with the rated ripple current applied
@The KZG series capacitors are designed for computer motherboards
@Non solvent-proof
Feature!
For PC Motherboards
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +105C
Rated Voltage Range
Capacitance Tolerance
Leakage Current
6.3 to 16Vdc
(at 20C, 120Hz)
P20% (M)
I=0.01CV or 3MA, whichever is greater.
(at 20C after 2 minutes)
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc)
Rated voltage (Vdc)
16V
10V
6.3V
tanE (Max.)
0.16
0.19
0.22
(at 20C, 120Hz)
When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase.
Rated voltage (Vdc)
16V
10V
6.3V
Z (-25C) / Z (+20C)
2
2
2
(at 120Hz)
Z (-40C) / Z (+20C)
3
3
3
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current for 2,000 hours at 105C.
The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors.
Capacitance change
[P25% of the initial measured value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C
without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not
more than 48 hours before the measurements.
Capacitance change
[P25% of the initial measured value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
?DIMENSIONS [mm]
FD'
Fd
Sleeve(Brown : PET)
FP0.5
@Terminal Code : E
L'
Vent
15min
4min
(F8 to F10)
Gas escape end seal
fD
fd
F
fD'
L'
10
8
0.6
0.6
5.0
3.5
FD+0.5max.
L+1.5max.
?PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E KZG AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 470MF:471, 2,200MF:222)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100,16V:160)
Series code
Category
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1241
1
Engineering Bulletin
Tentative
For your computer MOTHERBOARDS
Aluminum Electrolytic Capacitors
No.705F / Nov.2004
?STANDARD RATINGS
WV(Vdc)
6.3
10
16
Cap(mF)
820
1,200
1,500
1,800
1,800
2,200
3,300
680
1,000
1,000
1,500
1,500
1,800
2,200
470
680
680
1,000
1,000
1,500
1,800
Case size
fDbL(mm)
Impedance
(omax/20c, 100kHz)
Rated ripple current
(mArms/105c, 100kHz)
0.036
0.028
0.026
0.021
0.019
0.013
0.012
0.036
0.028
0.026
0.021
0.019
0.013
0.012
0.036
0.028
0.026
0.021
0.019
0.013
0.012
1,140
1,490
1,540
1,870
2,000
2,550
2,800
1,140
1,490
1,540
1,870
2,000
2,550
2,800
1,140
1,490
1,540
1,870
2,000
2,550
2,800
8B11.5
8B15
10B12.5
8B20
10B16
10B20
10B25
8B11.5
8B15
10B12.5
8B20
10B16
10B20
10B25
8B11.5
8B15
10B12.5
8B20
10B16
10B20
10B25
Part No.
EKZG6R3ESS821MHB5D
EKZG6R3ESS122MH15D
EKZG6R3ESS152MJC5S
EKZG6R3ESS182MH20D
EKZG6R3ESS182MJ16S
EKZG6R3ESS222MJ20S
EKZG6R3ESS332MJ25S
EKZG100ESS681MHB5D
EKZG100ESS102MH15D
EKZG100ESS102MJC5S
EKZG100ESS152MH20D
EKZG100ESS152MJ16S
EKZG100ESS182MJ20S
EKZG100ESS222MJ25S
EKZG160ESS471MHB5D
EKZG160ESS681MH15D
EKZG160ESS681MJC5S
EKZG160ESS102MH20D
EKZG160ESS102MJ16S
EKZG160ESS152MJ20S
EKZG160ESS182MJ25S
SS : Lead forming / Taping code
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Multipliers
Capacitance(mF)
Frequency (Hz)
470
680 to 1,800
2,200 to 3,300
120
0.50
0.60
0.75
1k
0.85
0.87
0.90
10k
0.94
0.95
0.95
100k
1.00
1.00
1.00
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1241
2