ENCAPSULATION MOLDED CHIP INDUCTOR R7X1008M SERIES • RoHS Compliant Product • Ordering Code: R7X1008M-XXX ( J, K Tolerance) • Inductance Tolerance: J = ±5%, K = ±10% (K is standard tolerance) • Package: Tape and Reel is the standard, 2000 pcs per reel • Operating Temperature: -40°C to +85°C ELECTRICAL SPECIFICATION @ 25°C Part Number L R7X1008M- (µH) R22 R27 R33 R39 R47 R56 R68 R82 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Mechanical Q Min L.Q Test Freq. (MHz) SRF Min (MHz) RDC Max (W) IDC Max 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 15 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.79 230 210 190 175 160 150 135 125 115 100 90 85 80 75 65 60 55 50 45 40 32 30 28 25 22 21 20 18 17 16 15 13 12 0.70 0.75 0.85 0.95 1.00 1.10 1.25 1.40 0.65 0.75 0.85 0.95 1.05 1.20 1.30 1.40 1.55 1.75 1.95 2.20 3.50 3.80 4.40 5.00 5.80 6.30 7.10 9.50 11.0 12.1 16.6 19.0 21.0 190 180 170 160 155 150 140 130 195 180 170 160 155 145 135 130 125 120 115 105 80 75 70 65 60 115 110 90 80 75 70 65 60 A B C D E 0.10 2,5 0.08 2,0 0.07 1,8 0.09 2,2 0.020 0,50 F H I J 0.048 1,20 0.059 1,50 0.025 0,64 0.060 1,53 Schematic Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ± 0.008 .XXX : ±0.004 mm: X,X : ± 0,20 X,XX : ±0,10 Product performance is limited to specified parameter. Data is subject to change without prior notice. 2463 208th, Ste. 205 Torrance, CA 90501 Phone: (310)533-1455 Fax: (310)533-1853 R7X1008M-XXX 0606JW http://www.mpsind.com Email: [email protected]