CHINA SEMICONDUCTOR CORPORATION Spec. No. Rev. PS-ND-08090401 A PRODUCT SPECIFICATION Model No CSM-88160EG Descriptions: 1.2 Inch 8X8 Dot-Matrix Display Dot Pitch 4.0mm CSM-88160: Column Cathode, Row Anode Emitting Color: Orange & Yellow Green CUSTOMER APPROVED SIGNATURES APPROVED BY CHECKED BY PREPARED BY CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:886-2-2223-9696 Fax:886-2-2223-9377 Tel:86-0575-8623888 Fax:86-0575-8623112 http://www.csctw.com.tw CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. Rev. PS-ND-08090401 A CSM-88160EG Features 1. 1.2 inch (31.0mm) Matrix height. 2. Case mold type. 3. RoHS compliant. 4. Low power consumption. 5. Easy mounting on P.C. board or socket. Device Selection Guide - Part No. CSM-88160EG Chip Material Emitted Color GaAsP Orange GaP Yellow Green Column Row Cathode Anode Package Dimensions - http://www.csctw.com.tw Page 1/6 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. PS-ND-08090401 Rev. A CSM-88160EG Internal Circuit Diagrams - Absolute Maximum Rating Orange (Ta=25 Parameter Symbol Rating Unit Power Dissipation Per Dice PAD 70 mW Continuous Forward Current Per Dice IAF 25 mA Peak Current Per Dice(duty cycle 1/10, 1kHz) IPF 90 mA - 0.33 VR 5 Operating Temp. Topr -35 ~ +85 Storage Temp. Tstg -35 ~ +85 Derating Linear From 25 Reverse Voltage Per Dice Per Dice ) mA/ V Solder temperature 1/16 inch below seating plane for 3 seconds at 260 http://www.csctw.com.tw Page 2/6 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. Rev. PS-ND-08090401 A CSM-88160EG Yellow Green (Ta=25 Parameter Symbol Rating Power Dissipation Per Dice PAD 70 mW Continuous Forward Current Per Dice IAF 25 mA Peak Current Per Dice(duty cycle 1/10, 1kHz) IPF 90 mA - 0.33 VR 5 Operating Temp. Topr -35 ~ +85 Storage Temp. Tstg -35 ~ +85 Derating Linear From 25 Per Dice Reverse Voltage Per Dice Unit ) mA/ V Solder temperature 1/16 inch below seating plane for 3 seconds at 260 Electro-optical Characteristics Orange Parameter (Ta=25 ) Symbol Min. Typ. Max. Unit Condition Forward Voltage Per Dot VF - 2.0 2.8 V IF=20mA Luminous Intensity Per Dot Iv - 4 - mcd IF=10mA - 632 - nm IF=20mA - 624 - nm IF=20mA - 35 - nm IF=20mA JS - - 100 A IV-m - - 2:1 . VR=5V Ip=80mA 1/16Duty Symbol Min. Typ. Max. Unit Condition Forward Voltage Per Dot VF - 2.1 2.8 V IF=20mA Luminous Intensity Per Dot Iv - 5 - mcd IF=10mA - 568 - nm IF=20mA - 572 - nm IF=20mA - 30 - nm IF=20mA - - 100 Peak Emission Wavelength Dominant Wavelength q Od Spectrum Radiation Bandwidth Reverse Current Luminous Intensity Matching Ratio Yellow Green Parameter Peak Emission Wavelength Dominant Wavelength (Ta=25 q Od Spectrum Radiation Bandwidth Reverse Current Luminous Intensity Matching Ratio JS IV-m - - http://www.csctw.com.tw 2:1 A . ) VR=5V Ip=80mA 1/16Duty Page 3/6 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. PS-ND-08090401 Rev. A CSM-88160EG Typical Electrical / Optical Charateristics Curves -Orange (Ta = 25 Unless Otherwise Noted) http://www.csctw.com.tw Page 4/6 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. Rev. PS-ND-08090401 A CSM-88160EG Yellow Green (Ta = 25 Unless Otherwise Noted) http://www.csctw.com.tw Page 5/6 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. Rev. PS-ND-0710 A CSM-88160EG Note: The specifications are subject to change without notice. Please contact us for updated information. http://www.csctw.com.tw 6/6 Page