CHINASEMI CSPR-U32DYL4-A0R

CHINA
SEMICONDUCTOR
CORPORATION
Spec. No. PS-LU-U32DYL4-A0R
A
Rev.
PRODUCT SPECIFICATION
Model No
:CSPR-U32DYL4-A0R
Descriptions:
■LED Type : Superbright Lamp
■LED Package : Piranha LED Lamp
■Emitting Color:Yellow
■Viewing Angle:90°
■Stopper
CUSTOMER
APPROVED
SIGNATURES
APPROVED BY
CHECKED BY
PREPARED BY
CHINA SEMICONDUCTOR CORPORATION
Address:2FL. NO.909,Chung-Cheng Road,
Chung-Ho City Taipei Hsien,Taiwan.
OPTO PLUS TECHNOLOGIES CO.,LTD
Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing,
ZheJiang,China
Tel:886-2-2223-9696
Fax:886-2-2223-9377
Tel:86-0575-88623888
Fax:86-0575-88623112
http://www.csctw.com.tw
CHINA
SEMICONDUCTOR
CORPORATION
Model No
Spec. No. PS-LU-U32DYL4-A0R
A
Rev.
:CSPR-U32DYL4-A0R
■ Features -
1. High Current Operation
2. High Luminous Output
3. High Reliability and Solid Performance
4. Optimal Optical/Mechanical Design
5. Packaged in Tubes for Use with Automatic Pick and Place Equipment
6. Rohs Compliant
■ Device Selection Guide Chip
LED Lens
Part No.
CSPR-U32DYL4-A0R
Material
Emitted Color
AlInGaP
Yellow
Water Transparent
■ Package Outline Dimensions -
*Tolerance:±
0.01
0.25
:±
Unit
inch
mm
http://www.csctw.com.tw
Page
:
1/5
CHINA
SEMICONDUCTOR
CORPORATION
Model No
Spec. No. PS-LU-U32DYL4-A0R
A
Rev.
:CSPR-U32DYL4-A0R
■ Absolute Maximum Rating -
(Ta=25
Parameter
Symbol
Rating
Unit
Pd
196
mW
Forward Current (DC)
IF
70
mA
Peak Forward Current *
IFP
100
mA
Reverse Voltage
VR
5
V
Operating Temp.
Topr
-30 ~ +80
Storage Temp.
Tstg
-40 ~ +100
Lead Soldering Temperature
Tsol
Power Dissipation
* Pulse width
℃
℃)
℃
℃
Max. 260 for 5 sec Max.
(3mm from the epoxy bulb)
≦0.1 msec. duty ≦1/10
■ Electro-optical Characteristics -
(Ta=25
Parameter
Symbol
Min.
Typ.
Max.
Unit
Forward Voltage
VF
-----
2.3
2.8
V
Luminous Intensity
IV
1400
2500
-----
mcd
Φv
600
1800
-----
mlm
Luminous Flux
Dominant Wavelength
Peak Wavelength
Viewing Angle
Reverse Current
2
℃)
Condition
IF=70mA
λd
-----
590
------
nm
λp
-----
597
-----
nm
θ 1/2
-----
90
-----
deg
IR
-----
-----
100
μA
http://www.csctw.com.tw
VR=5V
Page
:
2/5
CHINA
SEMICONDUCTOR
CORPORATION
■ Luminous Flux Rank Limits ( I
Spec. No. PS-LU-U32DYL4-A0R
A
Rev.
= 70mA )
F
:
unit mlm
Part No.CSPR-U32DYL4-A0R
Code
A
B
C
D
E
min.
600
1000
1500
2000
2500
■ Dominant Wavelength Rank Limits ( I
F
max.
1000
1500
2000
2500
3000
= 70mA )
:nm
unit
Part No. CSPR-U32DYL4-A0R
Code
min.
max.
Y3
Y4
589.5
592
592
594.5
Y5
594.5
597
■ Forward Voltage Rank Limits ( I
F
= 70mA )
:
unit v
Part No. CSPR-U32DYL4-A0R
Code
min.
max.
C
1.8
2.0
D
2.0
2.2
E
2.2
2.4
F
2.4
2.6
G
2.6
2.8
Notes:
1.
2.
3.
4.
5.
6.
7.
%
Tolerance of measurement of luminous Flux
:±15
Tolerance of measurement of dominant wavelength
:±2nm
Tolerance of measurement of forward voltage
:±0.05v
All data are measured by CSC's test equipment.
One delivery will include several color rank, VF rank and Iv ranks of the products.
The quantity-ratio of the ranks is decided by CSC.
Please confirm with CSC salesman,if your request different form standard specification.
http://www.csctw.com.tw
Page
:
3/5
CHINA
SEMICONDUCTOR
CORPORATION
Model No
Spec. No. PS-LU-U32DYL4-A0R
A
Rev.
:CSPR-U32DYL4-A0R
■ Typical Electrical / Optical Charateristics Curves -
Relative Intensity @ 20mA
(Ta = 25
℃ Unless Otherwise Noted)
1.0
0.5
0
550
600
650
700
Wavelength (nm)
Fig 5. Relative Intensity Vs. Wavelength
Fig 6. Relative Luminous Intensity vs.Radiation Angle
http://www.csctw.com.tw
Page
:
4/5
CHINA
SEMICONDUCTOR
CORPORATION
Model No
Spec. No. PS-LU-U32DYL4-A0R
A
Rev.
:CSPR-U32DYL4-A0R
■ Precautions For Use -
1. Recommended Soldering conditions
Wave Soldering
Temperature(°C)
260(max.)
250
240
Preheat
105(max.)
0
5 sec.
Max. 60sec.
Time(sec.)
2. Soldering Iron
Basic SPEC. is
be shorter (+10
≦5sec. When 260℃. If temperature is higher, time should
℃→ -1sec.). Power dissipation of iron should be smaller than 15W
, and temperature should be controllable. Surface temperature of the device should
be under 230
℃.
3. Static Electricity
a. Static electricity or surge voltage damages LEDs..
It is recommended that a wrist band or an anit-electrostatic glove be used
when handling the LEDs.
b. All devices, equipment and machinery must be properly grounded. It is
recommended that mesures be taken against surge voltage to the equipment
that mounts the LEDs.
Note: The specifications are subject to change without notice. Please contact us for updated information.
http://www.csctw.com.tw
Page
:
5/5