CHINASEMI CSPR-N30ATG4-A0R

CHINA
SEMICONDUCTOR
CORPORATION
Spec. No. PS-LU-N30ATG4-A0R
A
Rev.
PRODUCT SPECIFICATION
Model No
:CSPR-N30ATG4-A0R
Descriptions:
■LED Type : Superbright Lamp
■LED Package : Piranha LED Lamp
■Emitting Color:Green
■Viewing Angle:60°
■Stopper
CUSTOMER
APPROVED
SIGNATURES
APPROVED BY
CHECKED BY
PREPARED BY
CHINA SEMICONDUCTOR CORPORATION
Address:2FL. NO.909,Chung-Cheng Road,
Chung-Ho City Taipei Hsien,Taiwan.
OPTO PLUS TECHNOLOGIES CO.,LTD
Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing,
ZheJiang,China
Tel:886-2-2223-9696
Fax:886-2-2223-9377
Tel:86-0575-88623888
Fax:86-0575-88623112
http://www.csctw.com.tw
CHINA
SEMICONDUCTOR
CORPORATION
Model No
Spec. No. PS-LU-N30ATG4-A0R
A
Rev.
:CSPR-N30ATG4-A0R
■ Features -
1. High Current Operation
2. High Luminous Output
3. High Reliability and Solid Performance
4. Optimal Optical/Mechanical Design
5. Packaged in Tubes for Use with Automatic Pick and Place Equipment
6. Rohs Compliant
■ Device Selection Guide Chip
LED Lens
Part No.
CSPR-N30ATG4-A0R
Material
Emitted Color
InGaN
Green
Water Transparent
■ Package Outline Dimensions -
*Tolerance:±
0.01
0.25
:±
Unit
inch
mm
http://www.csctw.com.tw
Page
:
1/5
CHINA
SEMICONDUCTOR
CORPORATION
Model No
Spec. No. PS-LU-N30ATG4-A0R
A
Rev.
:CSPR-N30ATG4-A0R
■ Absolute Maximum Rating -
(Ta=25
Parameter
Symbol
Rating
Unit
Pd
190
mW
Forward Current (DC)
IF
50
mA
Peak Forward Current *
IFP
100
mA
Reverse Voltage
VR
5
V
Operating Temp.
Topr
-30 ~ +80
Storage Temp.
Tstg
-40 ~ +100
Lead Soldering Temperature
Tsol
Power Dissipation
* Pulse width
℃
℃)
℃
℃
Max. 260 for 5 sec Max.
(3mm from the epoxy bulb)
≦0.1 msec. duty ≦1/10
■ Electro-optical Characteristics -
(Ta=25
Parameter
Symbol
Min.
Typ.
Max.
Unit
Forward Voltage
VF
-----
3.3
3.8
V
Luminous Intensity
IV
3000
6300
-----
mcd
Φv
3000
4500
-----
mlm
Luminous Flux
Dominant Wavelength
Peak Wavelength
Viewing Angle
Reverse Current
λd
λp
2θ 1/2
IR
℃)
Condition
IF=50mA
-----
525
------
nm
-----
515
-----
nm
-----
60
-----
deg
-----
-----
100
μA
http://www.csctw.com.tw
VR=5V
Page
:
2/5
CHINA
SEMICONDUCTOR
CORPORATION
■ Luminous Flux Rank Limits ( I
Spec. No. PS-LU-N30ATG4-A0R
A
Rev.
= 50mA )
F
:
unit mlm
Part No.CSPR-N30ATG4-A0R
Code
min.
3000
3500
4000
5000
6000
F
G
H
J
K
■ Dominant Wavelength Rank Limits ( I
F
max.
3500
4000
5000
6000
7000
= 50mA )
:nm
unit
Part No. CSPR-N30ATG4-A0R
Code
min.
max.
TG1
515
520
TG2
520
525
TG3
525
530
TG4
530
535
■ Forward Voltage Rank Limits ( I
F
= 50mA )
:
unit v
Part No. CSPR-N30ATG4-A0R
Code
min.
max.
H
2.8
3.0
J
3.0
3.2
K
3.2
3.4
L
3.4
3.6
M
3.6
3.8
Notes:
1.
2.
3.
4.
5.
6.
7.
%
Tolerance of measurement of luminous Flux
:±15
Tolerance of measurement of dominant wavelength
:±2nm
Tolerance of measurement of forward voltage
:±0.05v
All data are measured by CSC's test equipment.
One delivery will include several color rank, VF rank and Iv ranks of the products.
The quantity-ratio of the ranks is decided by CSC.
Please confirm with CSC salesman,if your request different form standard specification.
http://www.csctw.com.tw
Page
:
3/5
CHINA
SEMICONDUCTOR
CORPORATION
Model No
Spec. No. PS-LU-N30ATG4-A0R
A
Rev.
:CSPR-N30ATG4-A0R
■ Typical Electrical / Optical Charateristics Curves (Ta = 25
℃ Unless Otherwise Noted)
Forward Current (mA DC)
Forward Current (mA DC)
40
30
20
10
30
25
20
15
10
5
0
0
25
50
75
1
Fig 1. Forward Current
Vs. Ambient
Temperature
Vs. Ambient
Temperature
4
2. Forward
Current
Fig 2.Fig
Forward
Current
Vs. Forward Voltage
150
100
Forward Current (mA)
Relative Intensity (%)
3
Forward Voltage V F (V)
Ambient Temperature Ta (°C)
125
100
75
50
25
0
Relative Intensity (%)
2
100
5
10
15
20
25
75
50
25
0
30
1
2
3
4
5
6
Forward Current I F (mA DC)
Forward Voltage (V)
Fig 3. Relative Intensity
Forward
Current
Vs.Vs.
Forward
Current
Fig 4. Fig
Peark
Forward
Voltage
4. Peark
Forward
Voltage
Vs.Forward
Vs.Forward
Current
Current
(100us test pulse,1% duty cycle)
1
100
75
50
25
0
500
510
520
530
540
550
560
Wavelength (nm)
Fig 5. Relative Intensity Vs. Wavelength
y
t
i
s
o
n
i
m
0.5
u
L
e
v
i
t
a
l
e
R 0------------ -- -------- ---Radiation Angle
Fig 6. Relative Luminous Intensity vs.Radiation Angle
http://www.csctw.com.tw
Page
:
4/5
CHINA
SEMICONDUCTOR
CORPORATION
Model No
Spec. No. PS-LU-N30ATG4-A0R
A
Rev.
:CSPR-N30ATG4-A0R
■ Precautions For Use -
1. Recommended Soldering conditions
Wave Soldering
Temperature(°C)
260(max.)
250
240
Preheat
105(max.)
0
5 sec.
Max. 60sec.
Time(sec.)
2. Soldering Iron
Basic SPEC. is
be shorter (+10
≦5sec. When 260℃. If temperature is higher, time should
℃→ -1sec.). Power dissipation of iron should be smaller than 15W
, and temperature should be controllable. Surface temperature of the device should
be under 230
℃.
3. Static Electricity
a. Static electricity or surge voltage damages LEDs..
It is recommended that a wrist band or an anit-electrostatic glove be used
when handling the LEDs.
b. All devices, equipment and machinery must be properly grounded. It is
recommended that mesures be taken against surge voltage to the equipment
that mounts the LEDs.
Note: The specifications are subject to change without notice. Please contact us for updated information.
http://www.csctw.com.tw
Page
:
5/5