CHONG PINGYANG ELECTRONICS CO.,LTD. RFC2K THRU RFC4K HIGH VOLTAGE FAST RECOVERY RECTIFIER VOLTAGE：2000-3000V CURRENT：0.2A DO-41 FEATURES ·fast switching ·Low leakage ·high current capability ·high surge capability ·High reliability 1.0(25.4) MIN. .205(5.2) .166(4.2) MECHANICAL DATA ·Case: Molded plastic ·Epoxy: UL94V-0 rate flame retardant ·Lead: MIL-STD- 202E, Method 208 guaranteed ·Polarity:Color band denotes cathode end ·Mounting position: Any ·Weight: 0.35 grams .034(0.9) .028(0.7) DIA. .107(2.7) .080(2.0) DIA. 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL RFC2K RFC3K RFC4K units Maximum Recurrent Peak Reverse Voltage VRRM 2000 3000 4000 Maximum RMS Voltage Maximum DC Blocking Voltage VRMS VDC 1400 2000 2100 3000 2800 4000 V V V Maximum Average Forward rectified Current at TA=50°C Io 0.2 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) IFSM 30 A Maximum Forward Voltage Drop per element at 0.2A DC Maximum DC Reverse Current @ TA=25°C at Rated DC Blocking Voltage @ TA=100°C Maximum Full Load Reverse Current Average, Full Cycle .375”(9.5mm) lead length at TL=75°C Typical Junction Capacitance (Note) Maximum Reverse Recovery Time (Note) Notes: VF 4.0 5.0 6.5 V 5.0 IR 100 µA 30 CJ 30 pF trr 500 nS Measured at 1MHz and applied reverse voltage of 4.0 volts １ PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn