CITIZEN CL-L103-HC3WW1-C

SPECIFICATIONS
1/9
1. Scope of Application
These specifications are applied to the chip type LED lamp , model CL-L103-HC3WW1-C
2. Part code
C L - L 1 0 3 - H C 3 WW1 - C
Series
L103 : White power LED for general lighting.
Special specifications
H : General Color Rendering Index Min. 90 Type.
Watt Class
C3 : 3 watt package.
Lighting color
WW1 : Energy Star Correlated Color Temperature 3500(K)
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L103-HC3WW1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P576 03/10
SPECIFICATIONS
2/9
3. Outline drawing
Cathode
Anode
Resin
CathodeMark(Gray)
Tc measuring-point(Board side)
Unit: mm
Tolerances unless otherwise specified: ±0.3
Anode
Cathode
Protection Device
It has a protection device built in as a protection circuit against static electricity.
4. Performance
( 1 ) Absolute Maximum Rating
Parameter
Symbol
Rating Value
Unit
Power Dissipation
PD
4.4
W
Forward Current
IF
420
mA
Forward Pulse Current
IFP
600
mA
Reverse Current
IR
1
mA
Operating Temperature
TOP
-30 ~ +85
C
Storage Temperature
TST
-40 ~ +100
C
*1
120
Tj Max
C
Junction Temperature
*2
*1Forward Current : Duty<=1/10 , Pulse Width<=10msec
*2 D.C. Current : Tj = Tc + Rj-c × PD
Pulse Current : Tj = Tc + Rj-c × Pw(Power Dissipation / one-Pulse) × duty
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L103-HC3WW1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P576 03/10
SPECIFICATIONS
3/9
( 2 ) Electro-optical Characteristics
Parameter
Symbol Condition
( Tc=25 C )
Min.
Typ.
Max.
Unit
Forward Voltage
VF
IF=350mA
8.75
9.30
10.5
V
Luminous Flux
Φv
IF=350mA
172
215
-
lm
Ra
IF=350mA
90
-
-
-
Rj-c
Junction-case
-
6.4
-
C/W
General Color
Rendering Index
Thermal Resistance
Chromaticity coordinates ( Condition : IF=350mA ,Tc=25 C )
Color rank
y
x
Center 0.4073 0.3917
a
0.4299 0.4165
WW1
b
0.3996 0.4015
c
0.3889 0.3690
d
0.4147 0.3814
*Color region stay with in MacAdam "3-step" ellipse from center.
0.43
0.42
0.41
y
0.40
0.39
0.38
0.37
0.36
0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44
x
Note: The tolerance of measurement at our tester is VF±3% , Φv±10% , Chromaticity(x,y)±0.01.
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L103-HC3WW1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P576 03/10
SPECIFICATIONS
4/9
5. Characteristics
Forward Current vs. Forward Voltage
Forward Current vs. Relative Luminous Flux
Tc=25C
10.0
VF [V]
9.5
9.0
8.5
8.0
7.5
120%
100%
80%
60%
40%
20%
0%
0
100
200
IF [mA]
300
400
Forward Current vs. Chromaticity Coordinate
0
400
IF=350mA
Δx
Δy
0.010
0.005
Δx, Δy
0.005
0.000
-0.005
0.000
-0.005
-0.010
-0.010
-0.015
-0.015
-0.020
-0.020
0
100
200
IF [mA]
300
0
400
Approved Checked
2010/3/1
Mark Date
300
0.015
Δy
0.010
200
IF [mA]
0.020
Δx
0.015
100
Case Temperature vs. Chromaticity Coordinate
Tc=25C
0.020
Δx, Δy
140%
Relative Luminous Flux [a.u.]
10.5
Issue of first edition
Description Appro.
20
Drawn
40
60
Tc [C]
80
100
Symbol
CITILED
Name
CL-L103-HC3WW1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P576 03/10
SPECIFICATIONS
Case Temperature vs. Forward Voltage
Case Temperature vs. Relative Luminous Flux
IF=350mA
10.0
9.5
9.0
8.5
8.0
IF=350mA
120%
Relative Luminous Flux [a.u.]
10.5
VF [V]
5/9
100%
80%
60%
40%
20%
7.5
0%
0
20
40
60
80
100
0
20
Tc [C]
IF [mA]
400
300
200
100
0
50
75
100
125
1.0
0.8
0.6
0.4
0.2
0.0
350
450
550
650
750
λ [nm]
Approved Checked
Issue of first edition
Description Appro.
100
IF=350mA
1.2
Tc [C]
2010/3/1
Mark Date
80
Spectrum
Relative Emission Intensity [a.u.]
500
25
60
Tc [C]
Case Temperature vs. Allowable Forward Current
0
40
Drawn
Symbol
CITILED
Name
CL-L103-HC3WW1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P576 03/10
SPECIFICATIONS
6/9
6. Reliability
(1) Details of the tests
Test Item
Test Condition
Ta=-30 C, IF=350 mA× 1000 hours(with Al-fin)
Continuous Operation Test Ta=60 C,IF=350 mA× 1000 hours(with Al-fin)
Ta=85 C ,IF=350 mA× 1000 hours(with Al-fin)
Low Temperature Storage Test -40 C × 1000 hours
High Temperature Storage Test 100 C × 1000 hours
Moisture-proof Test
60 C, 90 %RH for 1000 hours
Thermal Shock Test
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
(2) Judgment Criteria of Failure for Reliability Test
(Ta=25 C)
Measuring Item
Symbol
Measuring Condition
Judgment Criteria for Failure
Forward Voltage
VF
Total Luminous Flux
Φv
IF=350mA
IF=350mA
> U × 1.1
< S × 0.85
U defines the upper limit of the specified characteristics. S defines the initial value.
Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
returned to the normal ambient conditions after the completion of each test.
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L103-HC3WW1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P576 03/10
SPECIFICATIONS
7/9
7. Packing Specifications
(1) Packing
An empty tray is placed on top of a five-tier tray which contain 50 pieces each. The set of six
trays is banded together with two rubber bands.
(Smallest packing unit: 250 pieces)
A label with product name, quantity, lot number is placed on the upper empty tray.
Tray (Dimensions: 310 × 200 × 11mm / Materials: Electrically conductive PS)
< Packing figure >
Product 50pcs/tray
< Example of indication label >
C US TOM ER
CL-L103-HC3WW1-C
xxx
03D001
250 pcs.
TYPE
P.NO
LOT No
Q'ty
---(1)
---(2)
---(3)
---(4)
e.g. CL-L103-HC3WW1-C
2. P.No. (Cutomer's P/N)
e.g. xxx
3. Lot No.
e.g. 03D001
- First letter: Last digit of the year
e.g. 0 : year 2010
- Second letter: Production month
e.g. 3 : Mar
Note: October, November and December are designated
PASS
C ITIZEN ELEC TR ONIC S
1. TYPE
by X, Y and Z, respectively.
- Third letter: CE's control number
e.g. D001
4. Quantity
e.g. 250 pieces
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L103-HC3WW1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P576 03/10
SPECIFICATIONS
8/9
Precautions
1. Avoid the application of any stress to the lens portion.
2. Avoid any contact by a sharp metal nail or other materials with the lens portion.
Resin portion
3. This product should be secured firmly by fastening an M3 screw on both sides of the product.
Please be careful not to apply any stress to the product during the clamping operation.
As the connection status could vary depending on materials of outer heat sink,
please check thoroughly.
Recommended installation screw pitch
M3screw (Insulation)
Spring washer (≦φ6mm)
Plane washer ( ≦φ6mm)
Recommended torque : 0.6~0.8N-m
Thermal conductive silicon grease
(Insulation paste)
Outer heat sink
4. Thermal conductive silicone grease should be applied to the whole rear surface so that this product
can dissipate heat as a whole. However, the use of insulating paste is strongly recommended in
order to avoid short circuit. This product could be bent during the clamping operation if heat
grease in sheet form is used. For this reason, it is recommended that grease in paste form is used.
In addition, sufficient insulation should be established between heat sink area of LED package and
surface of fixture. (*surface of fixture: exterior of instrument used for dielectric strength test
in Electrical Appliance and Material Safety Law.)
5. Handling of static electricity
- These products are sensitive to static electricity charge.
Please take measures to prevent any static electricity being produced such as the wearing of a
wristband or anti-static gloves when handling this product.
- All devices, equipment and machinery must be properly grounded. It is recommended that precautions
be taken against surge voltage to the equipment that mounts the LEDs.
- ESD sensitivity of this product is 1000V (HBM, based on JEITA ED-4701/304).
- When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not.
- It is easy to find static-damaged LEDs by a light-on test.
<Light-on test criterion>
Judgmental criterion
Condition
IF=Max.1mA
No-lighting in entire block making
up parallel circuit is unacceptable
L103 consists of three blocks.
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L103-HC3WW1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P576 03/10
SPECIFICATIONS
9/9
Precautions (continued)
6. Please be aware that this product should not come into contact with any other parts
in assembled status.
7.Drive circuit
- A constant current circuit is recommended as a drive circuit.
And when two or more LED packages are connected, the series connection
between each package is recommended.
- Please design a circuit that prevents any reverse voltage (excess current) from being
applied to this product instantaneously when the circuit is ON or OFF.
8. Heat generation
- As this product is designed with consideration of the heat release property of module,
a heat release design is required to use this product efficiently.
Please ensure that heat generation is not in excess of the absolute maximum rating.
(Refer to 4-1 Performance)
- Factors responsible for an increase in temperature include heat generation attributed to
ambient temperature conditions or power dissipation. Thus, drive conditions should be
taken into consideration, depending on ambient temperature (Ta).
9. Recommended soldering
- Soldering operation should be performed within 3.5 seconds per land using a soldering iron
of 40W or lower. The temperature of a soldering iron should be adjusted 350C or lower.
- No external force is applied to sealing resin during soldering operation.
- Please do not handle a product until it returns to a normal temperature.
Note: This product is not adaptable to reflow process.
10. Other
- This product complies with RoHS directives.
- This product is intended for the application in general electronic devices (such as
office automation equipment, communication devices, audio-video equipment,
home electrical appliances, measurement hardware and others).
In cases where this product is used for the applications that requires high reliability or
could directly affect human life or health due to failure or malfunction (aerospace hardware,
medical equipment, atomic control equipment and others), please consult with our sales
representatives beforehand.
- Our warranty does not cover situations where this product undergoes secondary
fabrication such as changes in shape.
- An agreement of formal product specifications is required prior to mass production.
- The specifications and appearance of this product are subject to change without advanced notice.
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L103-HC3WW1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P576 03/10