® CLE230W, CLE231W, CLE232W High Power Aluminum Gallium Arsenide IREDs Clairex Technologies, Inc. July, 2001 0.100 (2.54) dia. 1.00 (25.4) min. 0.156 (3.96) 0.136 (3.45) 0.165 (4.19) 0.145 (3.68) 0.215 (5.46) 0.205 (5.21) ANODE 0.190 (4.83) 0.176 (4.47) CATHODE 0.025 (0.64) max. 0.010 (0.25) max 0.147 (3.73) 0.137 (3.48) 0.019 (0.48) 0.016 (0.41) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) absolute maximum ratings (TA = 25°C unless otherwise stated) features • • • • wide emission angle TO-46 hermetically sealed package excellent heat dissipation high power output description The CLE230W series are AlGaAs infrared emitting diodes mounted in flat window TO-46 hermetic packages. The wide emission angle provides even illumination over a large area. The series are spectrally and mechanically matched to the CLT130W phototransistor series. For additional information, call Clairex. storage temperature ...................................................................... -55°C to +150°C operating temperature ................................................................... -55°C to +125°C lead soldering temperature(1) ......................................................................... 240°C maximum continuous current(2) ..................................................................... 100mA peak forward current (10µs pulse width, 100pps) .............................................. 10A maximum power dissipation(3)...................................................................... 200mW reverse voltage .................................................................................................... 3V notes: 1. 2. 3. 0.06” (1.5mm) from the header for 5 seconds maximum. Maximum temperature can be 260°C if wave soldering. Derate linearly 0.80mA/°C from 25°C free air temperature to TA = +125°C. Derate linearly 1.6mW/°C from 25°C free air temperature to TA = +125°C. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter Irradiance(4,5) Ee CLE230W CLE231W CLE232W min typ max 1.5 - - 3.5 - - units mW/cm test conditions 2 IF = 100mA 5.0 - - VF Forward voltage(4,5) - - 2.0 V IF = 100mA IR Reverse current - - 10 µA VR = 3.0V λP Peak emission wavelength - 890 - nm IF = 100mA BW Spectral bandwidth at half power points - 80 - nm IF = 100mA ΘHP Emission angle at half power points - 70 - deg. IF = 100mA tr Output rise time - 500 - ns IF = 100mA tf Output fall time - 250 - ns IF = 100mA note: 4. Ee is a measure of irradiance (power/unit area) within a .25” (6.35mm) diameter area, centered on the mechanical axis of the device and spaced .466” (11.8mm) from the lens side of the tab. This is geometrically equivalent to a 30° cone. 5. Measurement taken at trailing edge of 100µs pulse with a duty cycle of 0.1%. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 12/01/04 Plano, Texas 75074-8524 www.clairex.com