CLE300F ® Aluminum Gallium Arsenide IRED Flat Lead PLCC Package Clairex Technologies, Inc. May, 2003 ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) features • Flat lead PLCC package • ±50° emission angle • 850 nm peak wavelength • RoHS compliant absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature ...................................................................... -40°C to +125°C operating temperature ................................................................... -40°C to +125°C lead soldering temperature(1) ......................................................................... 260°C (2) continuous forward current .......................................................................... 50mA peak forward current (1.0ms pulse width, 10% duty cycle).................................. 1A reverse voltage .................................................................................................... 5V continuous power dissipation(3) ...................................................................... 80mW description The CLE300F is an 850nm high output infrared emitting diode chip featuring current AlGaAs technology. notes: It is mounted in a compact, 1. 0.06” (1.5mm) from case for 5 seconds maximum. embedded leadframe package with 2. Derate linearly 0.40mA/°C from 25°C free air temperature to TA = +125°C. flying lead configuration and 3. Derate linearly 0.64mW/°C from 25°C free air temperature to TA = +125°C. overcoated with clear epoxy to provide a wide emission pattern. Contact Clairex for alternative wavelength emitter chips, different lenses and lead configurations. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter min typ max units PO Total power output 3.0 4.0 - mW IF = 20mA VF Forward voltage - 1.4 1.6 V IF = 20mA IR Reverse current - - 10 µA VR = 5V λp Peak emission wavelength - 850 - nm IF = 20mA BW Spectral bandwidth at half power points - 60 - nm IF = 20mA θHP Emission angle at half power points - 100 - deg. IF = 20mA - 11 - ns IF(PK) = 20mA - 7.0 - ns IF(PK) = 20mA tr tf notes: (4) Radiation rise time (4) Radiation fall time test conditions 4. f = 100kHz, D.C. = 50%. Pulse generator tr and tf <200ps. Clairex reserves the right to make changes at any time to improve design and to provide the best possible Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 11/08/06 Plano, Texas 75074-8524 www.clairex.com