CLE335, CLE330E, CLE330W ® 850nm Super Efficient AlGaAs IREDs Clairex Technologies, Inc. November, 2005 [ ] +.05 Ø.210+.002 -.001 Ø5.33-.03 Ø.100±0.005 [Ø2.54±.13] 1.00 [25.4] MIN .051±.010 [1.30±.25] CATHODE .025 [.064] MAX ANODE .183±.001 [4.65±.03] .154±.002 [3.91±.05] [ ] +.05 .017+.002 -.001 .43-.03 [ .141±.006 [3.59±.15] ] +.00 .149+.000 -.003 3.78-.08 CLE335 [ +.05 Ø.210+.002 -.001 Ø5.33-.03 ] Ø.100±0.005 [Ø2.54±.13] .094 [2.39] 1.00 [25.4] MIN +.00 .012+.000 -.003 .30-.08 [ CATHODE ] ANODE .166±.001 [4.22±.03] [ +.05 .017+.002 -.001 .43-.03 ] .050 [1.27] MAX .141±.006 [3.59±.15] CLE330E [ ] +.05 Ø.210+.002 -.001 Ø5.33-.03 Ø.100±.005 [Ø2.54±.13] 1.00 [25.4] MIN [ ] +.08 .018+.003 .45 -.002 [ -.05 ] +.10 .145+.004 -.003 3.68-.08 CATHODE ANODE .184±.001 [4.67±.03] .154±.002 [3.90±.05] [ +.05 .017+.002 -.001 .43-.03 ] .142±.006 [3.62±0.15] ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) CLE330W Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 11/08/06 Plano, Texas 75074-8524 www.clairex.com CLE335, CLE330E, CLE330W ® 850nm Super Efficient AlGaAs IREDs features • TO-46 header with three lens options • cathode connected to case • exceptionally high power output • different package styles provide flexible design options • RoHS compliant description The CLE335 series of products are high efficiency, high speed AlGaAs infrared emitting diodes. Output power typically exceeds standard AlGaAs emitters by 50%. The chip backside is N type material resulting in the case being common to the cathode. Three different lensing options are offered which satisfy the majority of application requirements. Contact Clairex for other package options. Clairex Technologies, Inc. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature CLE335 and CLE330W ............................................................. -65°C to +150°C CLE330E ................................................................................... -65°C to +100°C operating temperature CLE335 and CLE330W ............................................................. -65°C to +150°C CLE330E ................................................................................... -65°C to +100°C lead soldering temperature(1) .........................................................................260°C (2) continuous forward current ....................................................................... 100mA peak forward current (1.0ms pulse width, 10% duty cycle) ................................. 1A reverse voltage ................................................................................................... 5V continuous power dissipation(3) ................................................................... 200mW notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum 2. Derate linearly 0.64mA/°C from 25°C free air temperature to TA = +150°C or 1.06mA/°C to TA = +100°C (CLE330E). 3. Derate linearly 1.28mW/°C from 25°C free air temperature to TA = +150°C or 2.13mW/°C to TA = +100°C (CLE330E). electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter CLE335 Series VF IR λp BW tr, tf min typ max units - 1.7 850 50 11 7.0 1.9 10 - V µA nm nm ns ns IF = 100mA VR = 5V IF = 100mA IF = 20mA IF = 100mA, f =1kHz, D.C.=50% IF = 100mA, f =1kHz, D.C.=50% Total output power Total output power Emission angle at half power points 11 2.0 - 25 3.0 80 - mW mW deg. IF = 100mA IF = 20mA IF = 20mA Total output power Total output power Emission angle at half power points 10 2.0 - 20 3.0 70 - mW mW deg. IF = 100mA IF = 20mA IF = 20mA Forward voltage Reverse current Peak wavelength Spectral bandwidth Output rise time Output fall time test conditions CLE330E PO PO θHP CLE330W PO PO θHP CLE335 PO Total output power 10 20 mW IF = 100mA Ee Irradiance(4) 2.5 3.5 mW/cm2 IF = 100mA θHP Emission angle at half power points 22 deg. IF = 20mA note: 4. Ee is a measure of irradiance (power/unit area) within a 0.444" (1.128cm) diameter area, centered on the mechanical axis of the device and spaced 2.54" (6.45cm) from the lens side of the tab. This is geometrically equivalent to a 10° cone. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com CLE335, CLE330E, CLE330W Clairex ® 850nm Super Efficient AlGaAs IREDs Technologies, Inc. PO vs IF Wavelength @ IF = 100mA 20 15 PO (mW) Relative Intensity 1.0 0.8 0.6 0.4 10 5 0.2 0 0.0 700 750 800 850 900 0 950 10 20 30 40 All Products 60 70 80 90 100 110 All Products F Normalized vs AA VF VNormalized vsTT VF vs IF 1.2 120 100 1.1 80 IF (mA) VFVNormalized F Normalized 50 IF (mA) Wavelength (nm) 1.0 0.9 60 40 20 0.8 0 -75 -50 -25 0 25 50 75 100 125 1.0 1.1 1.2 1.3 TA- Degrees C TA – Degrees C 1.4 1.5 1.6 1.7 1.8 1.9 2.0 VF (V) All Products All Products Relative Intensity vs Angular Displacement TA TA POPNormalized O Normalized vsvs Relative Intensity Normalized PPOO Normalized 1.0 2.00 1.50 1.00 0.50 0.00 - 75 -50 -25 0 25 50 75 100 125 0.8 0.6 0.4 0.2 0.0 20 TTAA –- Degrees Degrees C C 10 0 -10 -20 Angular Displacem ent - Degrees All Products CLE335 Relative Intensity vs Angular Displacem ent Relative Intensity 1.20 1.00 0.80 0.60 0.40 0.20 0.00 100 80 60 40 20 0 -20 -40 -60 -80 -100 Angular Displacem ent - Degrees CLE330E and CLE330W Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com