CLE509 ® Preliminary Nine Element, 390nm UV LED Array Dome Lens Can, Hermetically Sealed Clairex Technologies, Inc. February, 2006 0.156 (3.96) 0.136 (3.45) 0.165 (4.19) 0.145 (3.68) 0.100 (2.54) dia. 1.00 (25.4) min. 0.215 (5.46) 0.205 (5.21) (connected to case) CATHODE 0.190 (4.83) 0.176 (4.47) ANODE 1 ANODE ANODE 2 0.025 (0.64) max. 0.147 (3.73) 0.137 (3.48) 0.019 (0.48) 0.016 (0.41) 0.050 (1.27) nom ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) For proper operation, ANODE 1 and ANODE 2 must be externally connected. features • 390nm wavelength • ±35° emission angle • Cathodes connected to case • RoHS compliant applications • identifying petroleum deposits in down-hole drilling operations • currency validation • security • water purification • UV epoxy curing absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature ...................................................................... -40°C to +150°C operating temperature ................................................................... -40°C to +125°C lead soldering temperature(1) ......................................................................... 260°C (2) continuous forward current, each diode ....................................................... 20mA peak forward current, each diode (1.0ms pulse width, 10% duty cycle) ........... 0.5A reverse voltage ................................................................................................. 5.0V continuous power dissipation(3) .................................................................... 350mW notes: 1. 0.06” (1.5mm) from case for 5 seconds maximum. 2. Derate linearly 0.21mA/°C from 25°C free air temperature to TA = +125°C. 3. Derate linearly 3.73mW/°C from 25°C free air temperature to TA = +125°C. description The CLE509 contains nine, parallel connected, 390nm LED die mounted on a TO-46 header. Custom variations are available which can contain from one to nine elements. Special lenses and multiple lead packages are also available. Call Clairex for more information. Exercise caution when applying power to this unit. It emits high amounts of UV radiation. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter min typ max units PO Total power output (4) 13.5 - - mW IF = 180mA(5) VF Forward voltage - 3.0 3.9 V IF = 180mA(5) IR Reverse current (per diode) - - 10 µA VR = 5.0V λp Peak emission wavelength 375 390 405 nm IF = 180mA(5) θHP Emission angle at half power points - 70 - deg. IF = 180mA test conditions (5) note: 4. Measured with both anode leads connected together. 5. This equates to 20mA per diode. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 3/16/06 Plano, Texas 75074-8524 www.clairex.com