CLI700 ® Clairex IRED – Photo-IC Reflective Object Sensor Technologies, Inc. March, 2002 0.500(12.7) min. 1. Vcc 2. Anode 0.100 Dia 0.175 (4.46) 0.165 (4.21) 3. Output 4. Ground to header 0.048 (1.22) 0.028 (0.71) 3 0.187 (4.75) 0.179 (4.55) Internally 4 connected 2 0.046 (1.17) 0.036 (0.91) 1 0.021 (0.53) Dia 0.017 (0.43) 43 Places 0.030 (0.76) max. 0.160 (4.08) Emitting Window 0.150 (3.81) Diameter 0.230 (5.84) 0.209 (5.31) 0.020 (0.50) Diameter Detection Area 2 45° 1 3 ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) 4 features • 0.020” dia. light pipe aperture • T0-72 package • Buffer, open collector output description The CLI700 consists of an 880nm AlGaAs IRED and a buffer, open collector photo-IC mounted on a custom TO-72 header. The IRED emits a broad radiation pattern through the formed clear epoxy lens. Radiation reflected from the target is received by a 0.020” diameter fiber optic light pipe attached to the active area of the photo-IC. Other photo-IC options are available. See the CLL series data sheet on our website. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature ........................................................................ -40°C to +125°C operating temperature ..................................................................... -40°C to +100°C lead soldering temperature(1) ........................................................................... 260°C IRED continuous forward DC current(2) ......................................................................35mA reverse DC voltage................................................................................................5V continuous power dissipation(3)......................................................................100mW PHOTO-IC supply voltage......................................................................................... 4.5V to 18V output sink current ............................................................................................25mA voltage at output lead (open collector) ................................................................30V note: 1. 0.06” (1.5mm) from the header for 5 seconds maximum 2. Derate linearly 0.37mA/°C from 25°C free air temperature to TA = +100°C. 3. Derate linearly 1.07mW/°C from 25°C free air temperature to TA = +100°C. definition: Output is buffer, open collector. Output is HIGH (OFF) when reflected light is sensed and LOW (ON) when reflected light is not sensed. electrical characteristics (TA = 25°C and VCC = 5.0V unless otherwise noted) symbol parameter VF IR λP BW ICC IRED forward voltage IRED reverse current Peak emission wavelength Spectral bandwidth at half power points Sensor supply current VOL Low level output voltage(4) min typ max units - 1.50 880 80 4.0 0.3 0.5 12 200 - 1.65 10 10.0 0.5 0.8 1.0 7.0 500 80 V µA nm nm mA V V µA mA % ns µs High level output current(5) IOH Turn-on threshold (IRED current) (5) IFT IF(+)/IF(-) Hysteresis tr, tf Output rise and fall time tP Propagation delay notes: 4. No reflective surface. 5. Measured using a Kodak 90% diffuse reflectance neutral white test card. test conditions IF = 20mA VR = 5V IF = 20mA IF = 20mA VCC=15V IC = 15mA, IF = 0 or 35mA IC = 25mA, IF = 0 or 35mA IF = 35mA, VOH = 25V d = 0.03 inches RL=200Ω, duty cycle = 50% RL=200Ω, duty cycle = 50% Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 3/16/06 Plano, Texas 75074-8524 www.clairex.com