CPC1035N 4-Pin SOP OptoMOS® Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 350 100 35 Description The CPC1035N is a miniature 1-Form-A solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAlAs infrared LED. The CPC1035N uses Clare’s state of the art double-molded vertical construction packaging to produce one of the world’s smallest relays. The CPC1035N offers board space savings of at least 20% over the competitor’s larger 4-Pin SOP relay. Units VP mA Ω Features • Small 4-Pin SOP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 1500Vrms Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Version Available Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant • CSA Certified Component: Certificate # 1172007 Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hook Switch • Dial Pulsing • Ground Start • Ringing Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Ordering Information Part # CPC1035N CPC1035NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) * For other packaging options consult factory. Pin Configuration + Control – Control 1 4 3 2 Load Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF tON Pb RoHS 2002/95/EC DS-CPC1035N-R11 e3 www.clare.com 1 CPC1035N Absolute Maximum Ratings (@ 25˚C) Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 350 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current Input to Output Characteristics @ 25°C Capacitance Input to Output 1 2 3 2 Conditions Symbol Min Typ Max t=10ms IL=100mA VL=350V IL ILPK RON ILEAK - 30 - 100 350 35 1 50V; f=1MHz tON tOFF COUT - 25 2 1 - IL=100mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.8 0.7 1.2 - 2 1.4 10 mA mA V µA - - - 1 - pF IF=5mA, VL=10V Units mA Ω µA ms pF Load current derates linearly from 100mA @ 25oC to 70mA @85oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 4mA is recommended. www.clare.com R11 CPC1035N PERFORMANCE DATA* CPC1035N Typical LED Forward Voltage Drop (TA=25ºC, IF=5mA) 35 35 20 15 10 1.17 15 10 5 0 28 29 30 On-Resistance (Ω) 31 0.65 0.70 0.75 0.80 LED Current (mA) 20 15 10 5 0.85 25 Load Current (mA) 15 10 5 0.60 0.65 0.70 0.75 0.80 LED Current (mA) 180 0.016 160 0.014 140 0.012 120 100 I F =10mA 80 60 I F =5mA 40 0.25 0.26 0 20 40 60 80 100 Temperature (ºC) CPC1035N Typical Blocking Voltage vs. Temperature CPC1035N Typical Turn-On vs. Temperature (IL=50mA) 425 Turn-On (ms) 420 415 410 405 400 395 -40 -20 Turn-Off (ms) 430 -20 0 20 40 60 Temperature (ºC) 80 100 0.70 0.80 0.90 Turn-On (ms) 1.00 1.10 CPC1035N Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (VL=350V) 0.008 0.006 0.004 0.002 -40 0.27 0.60 0.010 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 I F = 5mA I F = 10mA -40 -20 0 20 40 60 Temperature (ºC) 80 0 -40 120 Turn-Off (ms) 0.24 5 0.50 0 0 0.23 10 0.85 20 0.22 15 CPC1035N Typical Load Current vs. Temperature 20 0.21 20 0 0.55 CPC1035N Typical Turn-Off Time (TA=25ºC, IL=100mA, IF=5mA) CPC1035N Typical Turn-On Time (TA=25ºC, IL=100mA, IF=5mA) 25 Leakage (µA) 0.60 10 377.5 388.5 399.5 410.5 421.5 432.5 443.5 Blocking Voltage (VP) 0 0.55 15 32 Device Count (N) 10 27 CPC1035N Typical IF for Switch Dropout (TA=25ºC, IL=100mA) 25 15 20 0 26 20 25 5 0 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) Device Count (N) Device Count (N) 20 CPC1035N Typical IF for Switch Operation (TA=25ºC, IL=100mA) 25 Device Count (N) 25 5 0 CPC1035N Typical Blocking Voltage Distribution (TA=25ºC) 30 Device Count (N) 25 5 Blocking Voltage (VP) 35 30 Device Count (N) Device Count (N) 30 CPC1035N Typical On-Resistance Distribution (TA=25ºC, IL=100mA, IF=2mA) 100 -20 0 20 40 60 Temperature (ºC) 80 100 CPC1035N Typical Turn-Off vs. Temperature (IL=50mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 I F = 10mA I F = 5mA -40 -20 0 20 40 60 80 100 Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R11 www.clare.com 3 CPC1035N PERFORMANCE DATA* 1.6 I F = 50mA I F = 30mA I F = 20mA I F = 10mA I F = 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (ºC) 100 3.0 20 10 45 -20 0 20 40 60 80 100 0 CPC1035N Typical IF for Switch Operation vs. Temperature (IL=50mA) 150 CPC1035N Typical Load Current vs. Load Voltage (TA=25ºC, IF=5mA) Load Current (A) 0 -50 -100 -150 -3 -2 -1 0 1 Load Voltage (V) 2 3 10 15 20 25 30 35 40 45 50 2.5 1.5 1.0 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 Temperature (ºC) 80 100 -40 -20 0 20 40 60 80 100 Temperature (ºC) CPC1035N Energy Rating Curve 100 50 5 CPC1035N Typical IF for Switch Dropout vs. Temperature (IL=50mA) 3.0 2.0 -40 Temperature (ºC) 0.4 LED Forward Current (mA) 0 -40 0.6 50 0.5 0 Load Current (mA) 10 15 20 25 30 35 40 LED Forward Current (mA) LED Current (mA) LED Current (mA) On-Resistance (Ω) 30 0.8 0 5 2.5 40 1.0 0.2 0 50 1.4 1.2 120 CPC1035N Typical On-Resistance vs. Temperature (IL=50mA, IF=10mA) 60 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Turn-Off (ms) 1.8 1.4 CPC1035N Typical Turn-Off vs. LED Forward Current (IL=100mA) CPC1035N Typical Turn-On vs. LED Forward Current (IL=100mA) Turn-On (ms) LED Forward Voltage Drop (V) CPC1035N Typical LED Forward Voltage Drop vs. Temperature 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10μs 100μs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R11 CPC1035N MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Pb Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. e3 RoHS 2002/95/EC Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package Recommended PCB Land Pattern 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.150 ± 0.003) 0.60 (0.0217) 0.432 ± 0.127 (0.017 ± 0.005) 1.02 ± 0.025 (0.040 ± 0.001) Pin 1 2.54 Typ (0.100 Typ) 5.60 (0.2205) 1.30 (0.0512) 2.54 (0.10) 2.184 Max (0.086 Max) 0.0254 - 0.102 (0.001 - 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) Pin 1 B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 5 Specification: DS-CPC1035N-R11 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/16/08