CPC1230N 4 Pin SOP OptoMOS® Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 350 120 30 Units VP mA Ω Features • Small 4 Pin SOP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 1500Vrms Input/Output Isolation • 0.4mm Distance Through Insulation (Supplementary Isolation Requirement of EN60950) • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Version Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hook Switch • Dial Pulsing • Ground Start • Ringing Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Description The CPC1230N is a miniature 1-Form-A solid state relay in a 4 pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation and is compliant with supplementary isolation in accordance with EN/IEC 60950-1. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. The CPC1230N uses Clare’s state of the art double molded vertical construction packaging to produce the world’s smallest 4 pin relay. The CPC1230N offers board space savings of at least 20% over the competitor’s larger 4 pin SOP relay. Approvals • UL Recognized Component File #: E76270 • EN/IEC 60950-1 Supplementary Isolation compliant • CSA Certified Component: Certificate # 1172007 Ordering Information Part # CPC1230N CPC1230NTR Description 4 Pin SOP (100/tube) 4 Pin SOP (2000/reel) Pin Configuration CPC1230N Pinout + Control – Control 1 4 3 2 Load Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ Pb RoHS 2002/95/EC DS-CPC1230N-R07 e3 tOFF tON www.clare.com 1 CPC1230N Absolute Maximum Ratings (@ 25˚C) Parameter Blocking Voltage (Peak) Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Capacitance Input to Output Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 350 5 50 1 70 400 1 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW pF Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current 1 2 3 2 Conditions Symbol Min Typ Max t=10ms IL=120mA VL=350V IL ILPK RON ILEAK - 25 - 120 350 30 1 50V; f=1MHz tON tOFF COUT - 25 2 1 - IL=120mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.8 0.7 1.2 - 2 1.4 10 IF=5mA, VL=10V Units mA Ω µA ms pF mA mA V µA Load current derates linearly from 120mA @ 25oC to 80mA @ 85oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60°C) an LED drive current of 4mA is recomended. www.clare.com R07 CPC1230N PERFORMANCE DATA* CPC1230N Typical LED Forward Voltage Drop (TA=25ºC, IF=5mA) 35 35 35 30 25 20 15 10 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 24 24.5 CPC1230N Typical IF for Switch Operation (TA=25ºC, IL=120mA) 26 10 5 0.80 0.85 15 10 5 0.90 CPC1230N Typical Turn-Off Time (TA=25ºC, IL=120mA, IF=5mA) Load Current (mA) 20 15 10 5 0.65 0.21 0.22 0.23 0.24 0.25 0.26 400 CPC1230N Typical Turn-On Time (TA=25ºC, IL=120mA, IF=5mA) 20 15 10 5 0.75 0.80 0.85 0.90 0.85 0.90 1.00 1.10 1.15 1.20 1.25 LED Current (mA) Turn-On (ms) CPC1230N Typical Load Current vs. Temperature CPC1230N Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (VL=350V) 180 0.016 160 0.014 140 0.012 120 100 IF=10mA 80 IF=5mA 60 0.010 0.008 0.006 40 0.004 20 0.002 -40 0.27 -20 0 20 40 60 80 100 0 120 -40 -20 0 20 40 60 80 Turn-Off (ms) Temperature (ºC) Temperature (ºC) CPC1230N Typical Blocking Voltage vs. Temperature CPC1230N Typical Turn-On vs. Temperature (IL=80mA) CPC1230N Typical Turn-Off vs. Temperature (IL=80mA) 400 395 Turn-On (ms) 390 385 380 375 370 365 -40 0.70 0 0 380 385 390 395 Blocking Voltage (VP) 0 0.60 0.95 -20 0 20 40 60 Temperature (ºC) 80 100 5.0 4.5 4.0 3.0 3.0 2.5 2.0 1.0 1.0 0.5 0 -40 Turn-Off (ms) 25 375 25 Leakage (μA) 0.75 10 370 0 0.70 15 0 26.5 20 LED Current (mA) Device Count (N) 25.5 Device Count (N) Device Count (N) Device Count (N) 15 0 Blocking Voltage (VP) 25 CPC1230N Typical IF for Switch Dropout (TA=25ºC, IL=120mA) 25 20 0.65 20 On-Resistance (Ω) LED Forward Voltage Drop (V) 25 25 5 23.5 1.25 CPC1230N Typical Blocking Voltage Distribution (TA=25ºC) 30 Device Count (N) Device Count (N) 30 Device Count (N) CPC1230N Typical On-Resistance Distribution (TA=25ºC, IL=120mA, IF=2mA) IF=5mA IF=10mA -20 0 20 40 60 Temperature (ºC) 80 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 100 IF=10mA IF=5mA -20 0 20 40 60 80 100 Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R07 www.clare.com 3 CPC1230N PERFORMANCE DATA* 1.4 I F =50mA I F =30mA I F =20mA I F =10mA I F =5mA 1.0 0.8 -40 0 20 40 60 80 Temperature (ºC) 100 20 10 0 CPC1230N Typical IF for Switch Operation vs. Temperature (IL=80mA) CPC1230N Typical IF for Switch Dropout vs. Temperature (IL=80mA) 15 20 25 30 35 40 45 50 3.0 2.0 1.5 1.0 150 0 20 40 60 80 -20 0 20 40 60 Temperature (ºC) Temperature (ºC) CPC1230N Typical Load Current vs. Load Voltage (TA=25ºC, IF=5mA) CPC1230N Energy Rating Curve Load Current (A) 100 50 0 -50 -100 -150 -3 -2 -1 0 1 Load Voltage (V) 2 3 50 2.0 1.5 1.0 0 -40 100 45 0.5 0 -20 5 2.5 0.5 -40 0.2 10 15 20 25 30 35 40 LED Forward Current (mA) 10 LED Current (mA) LED Current (mA) 30 0.3 LED Forward Current (mA) 5 2.5 40 0.4 0 3.0 50 0.5 0.1 0 0 Load Current (mA) 0.7 0.6 120 CPC1230N Typical On-Resistance vs. Temperature (IL=80mA, IF=10mA) 60 On-Resistance (Ω) -20 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Turn-Off (ms) 1.6 Turn-On (ms) LED Forward Voltage Drop (V) 1.8 1.2 CPC1230N Typical Turn-Off vs. LED Forward Current (IL=120mA) CPC1230N Typical Turn-On vs. LED Forward Current (IL=120mA) CPC1230N Typical LED Forward Voltage Drop vs. Temperature 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10μs 100μs 1ms 10ms 100ms 80 100 -40 -20 0 20 40 60 80 100 Temperature (ºC) 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R07 MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Pb Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. e3 RoHS 2002/95/EC Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package Recommended PCB Land Pattern 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.150 ± 0.003) 0.60 (0.0217) 0.432 ± 0.127 (0.017 ± 0.005) 1.02 ± 0.025 (0.040 ± 0.001) Pin 1 2.54 Typ (0.100 Typ) 5.60 (0.2205) 1.30 (0.0512) 2.54 (0.10) 2.184 Max (0.086 Max) 0.0254 - 0.102 (0.001 - 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) Pin 1 B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1230N-R07 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/16/08 5